aigo AZ300 Mid Tower Computer Case User Manual

1. Ro-ràdh

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. Fiosrachadh Sàbhailteachd

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Làimhsich pannalan glainne tempered gu faiceallach. Tha iad brisg agus faodaidh iad briseadh ma thuiteas iad no ma bhuaileas iad iad.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• Cùm pàirtean beaga agus sgriothan air falbh bho chloinn.
• Dèan cinnteach gu bheil bunait cheart ann gus casg a chuir air cunnartan dealain.

3. Toradh thallview

3.1 Pannal I/O Aghaidh

Tha am pannal I/O aghaidh a’ toirt cothrom goireasach air puirt is smachdan riatanach.

Figure 2: Front I/O Panel Layout

• Port Seòrsa C: 1x USB Type-C port for modern connectivity.
• Port USB 2.0: 1x USB 2.0 port for peripheral connections.
• Port USB 3.0: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Reset/LED Button: Resets the system or controls LED lighting (if applicable).
• Putan Cumhachd: Turns the computer on or off.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• Co-fhreagarrachd motherboard: Supports ATX, Micro-ATX, and ITX motherboards.
• Storage Drive Bays: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• Fad GPU: Maximum GPU length of 400mm.
• Fad PSU: Supports standard ATX power supplies up to 200mm.

4. Stiùireadh stàlaidh

4.1 A’ cur a’ chùis air dòigh

1. Cuir a’ chùis air uachdar rèidh, seasmhach.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Figure 4: Rear-Side View of Case

4.2 Stàladh Motherboard

1. Install the I/O shield (if not pre-installed) into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Daingnich am bòrd-màthar leis na sgriothan a tha air an toirt seachad.

Figure 5: Motherboard Mounting Areas

4.3 Stàladh Aonad Solarachadh Cumhachd (PSU).

1. Lorg an t-àite stèileachaidh airson an PSU aig bonn cùl a’ chùis.
2. Slide your ATX power supply into the designated slot.
3. Daingnich an PSU ris a’ chùis le sgriothan bhon chùl.

4.4 Stàladh Draibh Stòraidh

1. SSDan 2.5": Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. Diosgan cruaidh 3.5": Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Secure all drives with the appropriate screws.

Figure 6: Rear Internal View with Drive Bays

4.5 Expansion Card (GPU) Installation

1. Thoir air falbh na còmhdaichean slot leudachaidh riatanach bho chùl a’ chùis.
2. Cuir a-steach do chairt grafaiceachd no cairtean leudachaidh eile a-steach do na sliotan PCIe iomchaidh air a’ bhòrd-màthar.
3. Daingnich na cairtean le sgriothan.

4.6 Stàladh Siostam Fuarachaidh

The aigo AZ300 supports flexible cooling configurations.

• Taic Fan: Multiple 120mm fan mounting points are available at the top, front, and rear.
• Taic Radiator: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7 Stiùireadh Càbaill

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables for improved airflow and aesthetics.

5. Obrachadh

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. Cumail suas

Regular maintenance helps ensure optimal performance and longevity of your computer components.

6.1 Glanadh Criathrag Duslach

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Prìomh Chriathrag Duslach Magnetic: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• Filter Dust PSU: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. A ’dèanamh trioblaid

• Siostam nach eil a’ dol air: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Gun taisbeanadh: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• Overheating: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• USB ports not working: Check that the USB headers from the front panel are correctly connected to the motherboard.

8. Sònrachaidhean

9. Barantas agus Taic

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo weblàrach.