SMARTRO SENSOR92

SMARTRO Wireless Remote Sensor User Manual

Model: SENSOR92

Ro-ràdh

This manual provides detailed instructions for the setup, operation, and maintenance of your SMARTRO Wireless Remote Sensor (Model SENSOR92). This sensor is designed to work with compatible SMARTRO indoor/outdoor thermometers, specifically models SC91 and SC62, to provide accurate temperature and humidity readings.

Important Note: This sensor is not compatible with SMARTRO models SC92, SC93, or SC31B.

Bathar seachadview

Aghaidh view of the SMARTRO Wireless Remote Sensor

Figear 1: Aghaidh view of the SMARTRO Wireless Remote Sensor, showing the digital display for temperature and humidity, channel indicator, and signal icon.

Air ais view of the SMARTRO Wireless Remote Sensor with battery compartment open

Figear 2: Cùl view of the sensor with the battery cover removed, illustrating the battery compartment, °C/°F selection button, TX button, and 1 to 3 channel switch. Also visible is the wall-mounting hole.

The SMARTRO Wireless Remote Sensor (SENSOR92) is a compact, battery-powered device designed to transmit outdoor or indoor environmental data to a compatible main unit. It features a digital display showing current temperature (in °C or °F) and humidity (%RH). The sensor is equipped with a wall-mount hole and a table stand for versatile placement.

Stàladh agus stàladh

  1. Stàladh bataraidh:

    • Open the battery compartment cover on the back of the sensor (refer to Figure 2).
    • Insert two (2) AA batteries, ensuring correct polarity (+ and -). Batteries are not included.
    • Dùin an còmhdach roinn bataraidh gu tèarainte.

  2. Taghadh seanail:

    • Locate the 1 to 3 Channel Switch inside the battery compartment (refer to Figure 2).
    • Select a channel (1, 2, or 3) for the sensor. If you are using multiple sensors, ensure each sensor is set to a different channel.

  3. Pairing with Main Unit:

    • Place the sensor within close proximity to your SMARTRO main unit (e.g., SC91 or SC62).
    • On the sensor, press the "TX" button (Transmit button) located inside the battery compartment (refer to Figure 2). This will send a signal to the main unit.
    • Follow the pairing instructions for your specific SMARTRO main unit to establish a connection. The main unit should display the sensor's readings.

  4. Suidheachadh:

    • The sensor can be placed on a flat surface using its integrated stand or mounted on a wall using the wall-mount hole.
    • For outdoor use, choose a location that is protected from direct sunlight and heavy rain to ensure accuracy and longevity. The transmission range is up to 200ft/60m in an open area.
    SMARTRO Wireless Remote Sensor mounted on an outdoor wall, showing wireless signal transmission

    Figear 3: Example of outdoor sensor placement, demonstrating its wireless transmission capability to the main unit.

Stiùireadh Obrachaidh

  • Taghadh Aonad Teòthachd (°C/°F):

    • To switch between Celsius (°C) and Fahrenheit (°F), open the battery compartment cover.
    • Press the "°C/°F" selection button located inside the compartment (refer to Figure 2). The display will update accordingly.

  • Taisbeanadh Leughaidh:

    • The sensor's digital display shows the current temperature and humidity readings.
    • These readings are also transmitted wirelessly to your paired SMARTRO main unit.

Cumail suas

  • Ath-nuadhachadh bataraidh:

    • When the battery indicator on the sensor or main unit shows low power, replace both AA batteries promptly.
    • Ensure proper polarity during installation.

  • Glanadh:

    • Sguab taobh a-muigh an sensor le clò bog,amp aodach. Na cleachd innealan-glanaidh sgudail no bog an inneal ann an uisge.

  • Dìon Àrainneachdail:

    • Keep the sensor away from direct sunlight and heavy rain to prevent damage and ensure accurate readings.

Fuasgladh thrioblaidean

TrioblaidAdhbhar a dh’fhaodadh a bhith annFuasgladh
No readings on main unit / Sensor display blank.
  • Bataraidhean ìosal no marbh.
  • Polarachd bataraidh ceàrr.
  • Sensor not paired with main unit.
  • Sensor a-mach às an raon.
  • Eadar-theachd.
  • Cuir bataraidhean AA ùra an àite bataraidhean.
  • Thoir sùil air stiùireadh bataraidh.
  • Press the "TX" button on the sensor and re-pair with the main unit.
  • Gluais an sensor nas fhaisge air a’ phrìomh aonad.
  • Relocate sensor away from electronic devices that may cause interference.
Leughaidhean teòthachd/taiseachd mì-chruinn.
  • Sensor exposed to direct sunlight or moisture.
  • Braitear air a chur faisg air stòran teas no beul-fhionnaidh.
  • Sensor not calibrated (not user-adjustable).
  • Relocate sensor to a shaded, well-ventilated area, protected from rain.
  • Move sensor away from heat/cold sources.
  • If readings persist, contact customer support.
Main unit not receiving signal from sensor.
  • Sensor channel not matching main unit.
  • Obstructions between sensor and main unit.
  • Verify the channel switch setting on the sensor matches the selected channel on the main unit.
  • Minimize walls, large metal objects, or other obstructions between the sensor and main unit.

Sònrachaidhean

  • Modail: SENSOR92
  • Co-chòrdalachd: SMARTRO SC91, SC62 (Not compatible with SC92, SC93, SC31B)
  • Stòr cumhachd: 2 x Bataraidhean AA (gun a thoirt a-steach)
  • Raon Tar-chuir: Up to 200ft / 60m (open area)
  • Sianalan: 3 seanalan selectable
  • Taisbeanadh teothachd: °C / °F ri thaghadh
  • Fulangas teòthachd: +/- 5 ° F.
  • Fulangas Taiseachd: +/- 5% RH
  • Stuth: Plastaig
  • Meudan (approx.): 2.3 òirlich (fad)
  • Cuideam (approx.): 2.46 unnsa
  • Teicneòlas ceangail: RF
  • Seòrsa taisbeanaidh: Didseatach
  • Cùram Bathar: Keep away from direct sunlight and rain.

Barantas agus Taic

SMARTRO products are designed for reliability and performance. For warranty information or technical support, please contact SMARTRO customer service. Details can often be found on the official SMARTRO weblàrach-lìn no tron ​​àrd-ùrlar ceannach agad.

Dèanadair: SMARTRO

Post-d: taic@smartro.co

Please have your model number (SENSOR92) and purchase details ready when contacting support.

© 2024 SMARTRO. All rights reserved.