Leabhar-làimhe Cleachdaiche Cèis PC Meadhan-Thùir Sharkoon RGB SLIDER WT

1. Ro-ràdh

The Sharkoon RGB SLIDER WT is a versatile mid-tower PC case designed for optimal functionality and aesthetic appeal. It features an integrated RGB LED strip on the front panel, offering customizable lighting effects. The case supports various component configurations, including multiple cooling fan options and extensive storage capabilities. A tempered glass side panel provides a clear view de phàirtean a-staigh.

Ìomhaigh 1.1: Aghaidh view of the Sharkoon RGB SLIDER WT PC Case, showcasing the RGB LED strip and tempered glass side panel.

2. Pasgan-susbaint

Dèan cinnteach gu bheil a h-uile nì anns a’ phacaid:

• Sharkoon RGB SLIDER WT PC Case
• 1x 120mm Rear Fan (pre-installed)
• Accessory Box (containing screws, cable ties, and this manual)

3. Sònrachaidhean

Image 3.1: Diagram illustrating the dimensions of the Sharkoon RGB SLIDER WT PC Case.

4. Setup agus Stàladh

4.1. Ullachadh

Before beginning installation, ensure the PC case is placed on a stable, flat surface. Unpack all components and verify against the package contents list. It is recommended to wear an anti-static wrist strap to prevent damage to sensitive electronic components.

4.2. Stàladh motherboard

1. Install the I/O shield into the designated slot at the rear of the case.
2. Align the motherboard with the standoffs inside the case. Ensure the I/O ports align with the I/O shield.
3. Daingnich am bòrd-màthar le bhith a’ cleachdadh nan sgriothan a tha air an toirt seachad.

Ìomhaigh 4.1: Taobh a-staigh view of the PC case, showing the motherboard mounting area and pre-installed rear fan.

4.3. Stàladh Aonad Solarachaidh Cumhachd (PSU)

1. Locate the PSU tunnel at the bottom rear of the case.
2. Slide the PSU into the tunnel from the rear of the case, ensuring the fan faces downwards (if applicable, for bottom intake).
3. Daingnich an PSU le sgriothan bho chùl a’ chùis.

4.4. Stàladh Inneal Stòraidh

The case supports 3.5" HDDs and 2.5" SSDs.

• Diosgan cruaidh 3.5": Install into the drive cage located within the PSU tunnel.
• SSDan 2.5": Mount onto the dedicated SSD trays behind the motherboard tray or on top of the PSU tunnel.

Image 4.2: Rear interior view, highlighting cable management options and locations for 2.5" SSDs and 3.5" HDD cage.

4.5. Expansion Card Installation (e.g., GPU)

1. Thoir air falbh na còmhdaichean slot PCIe riatanach bho chùl a’ chùis.
2. Insert the expansion card into the corresponding PCIe slot on the motherboard.
3. Secure the card with screws.

4.6. Fan Installation (Optional)

Additional fans can be installed at the front and top of the case.

• Luchd-leantainn aghaidh: Remove the front panel to access the mounting points for up to three 120mm fans.
• Prìomh luchd-leantainn: Mount up to two 120mm or 140mm fans to the top panel.

4.7. Riaghladh càball

Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and maintains a clean interior aesthetic.

5. Stiùireadh Obrachaidh

5.1. Cumhachdachadh Air adhart

After all components are installed and cables connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button on the top panel of the case to start your system.

Ìomhaigh 5.1: Mullach view of the case, detailing the front I/O panel with USB ports and audio jacks.

5.2. Smachd Solais RGB

The front RGB LED strip can be controlled in two ways:

• Built-in Controller: Use the dedicated RGB control button on the top panel to cycle through 14 preset lighting modes.
• Motherboard ARGB Sync: Connect the RGB cable from the case to a compatible 3-pin 5V ARGB header on your motherboard. The lighting can then be controlled via motherboard software (e.g., Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion, ASRock Polychrome SYNC).

5.3. Front Panel Ports

The front I/O panel provides convenient access to:

• 2x USB 3.0 ports for high-speed data transfer.
• 1x USB 2.0 port for general peripherals.
• Audio In (microphone) and Audio Out (headphone) jacks.

6. Cumail suas

6.1. Glanadh

• Taobh a-muigh: Sguab na h-uachdaran a-muigh le bog, damp aodach. Seachain luchd-glanaidh sgudail.
• Filters Dust: Regularly remove and clean the dust filters (e.g., top magnetic filter, bottom PSU filter) to maintain optimal airflow and prevent dust buildup inside the case.
• Taobh a-staigh: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning the interior.

6.2. Airflow

Ensure that the case has adequate clearance around it for proper airflow. Avoid blocking intake or exhaust vents. Regularly check fan operation to ensure they are spinning correctly.

7. A ’dèanamh trioblaid

7.1. Chan eil an siostam a’ dol air

• Verify that the power cable is securely connected to both the PSU and the wall outlet.
• Ensure the PSU's power switch is in the 'ON' position.
• Dèan cinnteach gu bheil càball a’ phutan cumhachd air a’ phannal aghaidh ceangailte gu ceart ri ceann pannal aghaidh a’ bhòrd-mhàthar.
• Confirm all internal power connections (24-pin ATX, CPU power, GPU power) are secure.

7.2. Luchd-leantainn gun a bhith a’ snìomh

• Check fan power connections to the motherboard or fan controller.
• Ensure fan headers are enabled in the motherboard BIOS/UEFI settings.

7.3. Solais RGB gun a bhith ag obair

• If using the built-in controller, press the RGB button to cycle modes.
• If using motherboard sync, ensure the ARGB cable is correctly connected to a 3-pin 5V ARGB header (not 4-pin 12V RGB).
• Verify that the motherboard's RGB software is installed and configured correctly.

7.4. Puirt USB/Fuaime a’ Phannal Aghaidh gun a bhith ag Obrachadh

• Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the corresponding headers on the motherboard.
• Dèan cinnteach gu bheil draibhearan motherboard air an stàladh.

8. Barantas agus Taic

Sharkoon products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon website. For technical support, product inquiries, or service requests, please contact Sharkoon customer support through their official channels.

For further assistance, please visit the official Sharkoon weblàrach: www.sharkoon.com