1. Ro-ràdh
Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.
Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.
2. Dè tha sa bhogsa
Thoir sùil air susbaint a’ phacaid gus dèanamh cinnteach gu bheil a h-uile rud ann:
- 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
- 1 x Smachd Iomallach IR 44-iuchrach
- 1 x 24V Power Adapter (US Plug)
3. Fiosrachadh Sàbhailteachd
Read all safety instructions before installation and use. Keep this manual for future reference.
- Cleachdadh a-staigh a-mhàin: This product is designed for indoor use and is not waterproof.
- Solar cumhachd: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
- Surface stàlaidh: Dèan cinnteach gu bheil uachdar an stàlaidh glan, tioram agus rèidh airson an coileanadh greamachaidh as fheàrr.
- A 'gearradh an stiall: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
- Seachain cus teas: Do not coil the LED strip tightly when powered on, as this can cause overheating.
- Clann is Peataichean: Cùm an toradh agus a phàirtean a-mach à ruigsinneachd chloinne is pheataichean.
4. Suidheachadh & Stàladh
Lean na ceumannan seo airson an stàladh ceart:
- Ullaich an uachdar: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
- Measure and Cut (if necessary): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
- Ceangail an stiall: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
- Ceangal cumhachd: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
- Cuir an gnìomh an dòigh iomallach: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.
Figure 2: Visual guide for LED strip installation steps.
Figure 3: Connection diagram and remote activation.
Figure 4: 3M Adhesive and Fixing Clips.
5. Stiùireadh Obrachaidh
Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.
Figure 5: 44-Key IR Remote Control Layout.
Feartan smachd aig astar:
- Air / dheth: Putan cumhachd gus na solais a thionndadh air no dheth.
- Atharrachadh soilleireachd: Cleachd an ↑ agus ↓ putanan gus soilleireachd a mheudachadh no a lùghdachadh.
- Taghadh dath: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
- Dathan DIY: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
- Brùth a DIY putan.
- Cleachd an ↑ agus ↓ arrows next to R, G, B to adjust the intensity of each primary color.
- Brùth an aon rud DIY button again to save your custom color.
- Taghadh Modh: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
- Flash: Jumps between colors.
- FADE3/FADE7: A’ seargadh eadar 3 no 7 dathan.
- JUMP3/JUMP7: Jumps between 3 or 7 colors.
- AUTO: Cycles through all modes.
- LUATH/SALACH: Bidh e ag atharrachadh astar mhodhan fiùghantach.
Figure 6: Remote control in use for ambient lighting.
6. Cumail suas
Proper maintenance ensures the longevity of your LED strip lights.
- Glanadh: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
- Stòradh: If storing the lights for an extended period, ensure they are clean, dry, and coiled loosely to prevent damage.
- Seachain lùbadh: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.
7. A ’dèanamh trioblaid
Ma thachras tu ri duilgheadasan, thoir sùil air na duilgheadasan agus na fuasglaidhean cumanta a leanas:
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Chan eil solais a’ tionndadh air. |
|
|
| Tha smachd iomallach neo-fhreagairt. |
|
|
| Tha na dathan ceàrr no neo-chunbhalach. |
|
|
8. Sònrachaidhean
| Feart | Mion-fhiosrachadh |
|---|---|
| Brand | Lepro |
| Modail Àireamh | PR410116-RGB-US |
| Seòrsa Stòr Solais | LED (5050 SMD) |
| Dath aotrom | RGB (Red, Green, Blue) + White, 16 Multicolored Options, 6 DIY Colors |
| Fad | 39.4 troigh (12m) |
| Voltage | 24 Volts (Power Adapter) |
| Dètage | 18 Watts (Co-chòrdail ris a’ char as àirde) |
| Modh smachd | 44-Key IR Remote Control |
| Feart sònraichte | Color Changing, Dimmable, 8 Dynamic Modes |
| Cleachdadh a-staigh / a-muigh | Taobh a-staigh a-mhàin |
| Stuth | Copar, plastaig |
| Cuideam nì | 9.6 unnsa |
| Clàr-ìnnse Dhathan (CRI) | 85.00 |
Figure 7: ETL Listed 24V Power Adapter.
9. Barantas & Taic
Lepro products are designed for reliability and performance. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official Lepro weblàrach.
Fiosrachadh conaltraidh:
- Weblàrach: www.lepro.com (Thoir sùil air an làrach-lìn oifigeil weblàrach-lìn airson an fhiosrachadh conaltraidh as ùire.)
- Post-d: Thoir sùil air pacaigeadh an toraidh no weblàrach.