The EL-50448 TPMS Reset Tool is designed to assist in the re-learn procedure for Tire Pressure Monitoring Systems (TPMS) in most GM vehicles equipped with a 315 or 433 MHz TPMS. This procedure is necessary after tire rotations, Remote Control Door Lock Receiver Module replacement, or Tire Pressure Sensor replacement to ensure the system functions correctly.
The tool facilitates the reading of tire pressure sensor information, allowing the Body Control Module to record the ID information of each sensor position. It is a compact and portable device, universal for most cars, and features a diagnostic sensing function.
Figear 1.1: Aghaidh is cùl view of the EL-50448 TPMS Reset Tool.
Adhbhar: To perform the "Sensor Re-Learn Procedure" for GM vehicle TPMS.
Co-chòrdalachd: Works on GM models equipped with 315 or 433 MHz TPMS, including 2014 GM models and later.
Feartan: Diagnostic sensing function, compact and portable design.
Thoir an aire: The package does not include the charger and battery. Please purchase them separately.
2. Suidhich
Before using the EL-50448 TPMS Reset Tool, ensure it is properly powered. The tool requires a 9V battery (not included). Follow these steps to install the battery:
Lorg còmhdach roinn a’ bhataraidh air cùl an inneil.
Sleamhnaich an còmhdach sìos gus an roinn fhosgladh.
Insert a new 9V battery, ensuring the polarity is correct.
Sleamhnaich còmhdach roinn a’ bhataraidh air ais na àite gus an cliog e gu tèarainte.
Figure 2.1: Battery compartment on the back of the tool.
Once the battery is installed, the tool is ready for operation.
3. Stiùireadh Obrachaidh
To perform the tire pressure sensor re-learn procedure, follow these steps carefully:
Step 1: Enter Learning Mode
Set the vehicle's gearshift lever to "P" (Park).
Put the ignition switch to "ON" (Engine Off, Ignition On).
Navigate to the tire pressure display interface using the Driver Information Center (DIC).
The DIC should display "Press Set / Ctrl to re-learn".
Press the "Set / Ctrl" button on your vehicle's controls.
The vehicle's turn signal will light for 3 seconds, and the horn will beep twice, indicating that the vehicle has entered the learning mode.
Step 2: Read Tire Pressure Sensor Information (Front-Left Wheel)
Begin the re-learn process starting with the front-left wheel.
Hold the EL-50448 tool's antenna up against the valve core position of the front-left tire. Ensure it is close to the rim of the tire sidewall.
Press the activation button on the EL-50448 tool to start the reading process.
A single horn beep from the vehicle indicates that the tire pressure sensor information has been successfully read.
Figure 3.1: Positioning the tool near the tire valve for activation.
Figure 3.2: The tool activates the individual TPMS sensor with a single button press.
Step 3: Read Other Tire Pressure Information
Continue the process for the remaining tires in the following order:
Front-Right wheel
Rear-Right wheel
Rear-Left wheel
Use the same method as described in Step 2 for each wheel. After the last wheel's sensor information is successfully read, the vehicle's turn signals will light for 3 seconds, and the horn will beep twice, indicating that the learning procedure is complete.
Figure 3.3: The tool is held against the tire sidewall near the valve stem.
4. Cumail suas
Proper maintenance ensures the longevity and optimal performance of your EL-50448 TPMS Reset Tool.
Glanadh: Wipe the tool with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Stòradh: Store the tool in a cool, dry place away from direct sunlight and extreme temperatures.
Ath-nuadhachadh bataraidh: Replace the 9V battery when the "LOW BAT" indicator light illuminates on the tool. Refer to the "Setup" section for battery installation instructions.
Seachain Drops: Protect the tool from physical shocks and drops, which can damage internal components.
5. A ’dèanamh trioblaid
If you encounter issues while using the EL-50448 TPMS Reset Tool, refer to the following common problems and solutions:
Trioblaid
Adhbhar a dh’fhaodadh a bhith ann
Fuasgladh
Tool does not activate sensor / No horn beep
Vehicle not in learning mode.
Tool battery is low or dead.
Tool not positioned correctly.
Cùis mothachaidh.
Ensure vehicle is in TPMS learning mode (refer to Step 1 of Operating Instructions).
Check "LOW BAT" indicator. Replace 9V battery if necessary.
Ensure the tool's antenna is directly against the valve core and close to the rim.
Consult a professional if the sensor is suspected to be faulty.
"LOW BAT" indicator light is on
Tha cumhachd bataraidh ìosal.
Replace the 9V battery immediately. Refer to the "Setup" section.
Inneal gun tionndadh air
No battery or incorrect installation.
Bataraidh lochtach.
Ensure a 9V battery is installed correctly with proper polarity.
Feuch bataraidh 9V ùr.
Figure 5.1: Indicator lights on the EL-50448 tool.
6. Sònrachaidhean
Feart
Mion-fhiosrachadh
Modail Àireamh
EL-50448 (OEC-T5)
Àireamh Modail Nì
756029690080
Brand
TPMS
Cuideam nì
5 unnsa
Meudan (Mu thuairmse)
153mm (6.02") x 53mm (2.09") x 35mm (1.38")
Stòr cumhachd
Bataraidh 9V (gun a thoirt a-steach)
Tricead Obrachaidh
315 or 433 MHz (for TPMS sensors)
UPC
669763149045
Dèanadair
Amzmall
Ceann-latha Ri fhaighinn an-toiseach
14 Sultain, 2020
Figure 6.1: Approximate dimensions of the EL-50448 tool.
7. Barantas agus Taic
For warranty information, technical support, or any inquiries regarding your EL-50448 TPMS Reset Tool, please contact the manufacturer or seller directly.
Dèanadair: Amzmall
General Support Line: 1-888-407-8767 (As seen on product labeling)
Poileasaidh Tilleadh: Refer to your purchase platform's return policy (e.g., Amazon's 30-day refund/replacement policy).
Cùm dearbhadh ceannach airson tagraidhean barantais sam bith.
VXDAS TPMS Relearn Tool Troubleshooting Guide - EL-50448 OEC-T5 Comprehensive troubleshooting guide for VXDAS TPMS Relearn Tools (EL-50448, OEC-T5) covering common issues like product not working, dashboard data disorder, and flashing lights. Solutions for GM vehicles.
Stiùireadh Cleachdaiche Inneal Ath-ionnsachaidh TPMS EL-50448 PLUS Stiùireadh-cleachdaidh airson inneal ath-ionnsachaidh TPMS EL-50448 PLUS, a’ còmhdach obrachadh airson carbadan Ford agus GM, modhan-obrach ath-ionnsachaidh, agus gèilleadh ri FCC. A’ gabhail a-steach stiùireadh mionaideach agus taisbeanaidhean lèirsinneach.
EL-50448 TPMS Reset Tool User Instructions Step-by-step guide on how to use the EL-50448 TPMS reset tool for General Motors vehicles, including battery requirements and learning mode activation procedures.
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.
