Sharp Digital Alarm with AccuSet - Automatic Smart Clock User Manual

Ro-ràdh

This manual provides detailed instructions for the setup, operation, and maintenance of your Sharp Digital Alarm Clock with AccuSet. Designed for ease of use, this clock automatically sets the time, making it ideal for all users.

Figear 1: Aghaidh view of the Sharp Digital Alarm Clock.

Feartan toraidh

• AccuSet Automatic Time Set: Pre-programmed time for hassle-free setup.
• Quick Daylight Savings Time (DST) Adjustment: Simple switch for DST changes.
• High/Low Dimmer Control: Soilleireachd taisbeanaidh a ghabhas atharrachadh.
• Bataraidh cùl-taic: Pre-installed CR2032 battery for time settings retention during power outagtha.
• Taghadh Sòn Àm: Easily select your local time zone.

Figure 2: Key features of the Sharp Digital Alarm Clock.

Suidhich

1. Initial Power-Up and Time Zone Selection

1. Locate the time zone switch on the bottom of the clock.
2. Select your desired time zone (e.g., EST for Eastern Standard Time). The default is Eastern Standard Time.
3. Plug the clock into an approved electrical source. The AccuSet feature will automatically set the correct time.

2. Daylight Savings Time (DST) Adjustment

To adjust for Daylight Savings Time:

• Slide the DST switch on the bottom of the clock to ON to add one hour (+1 hr).
• For Standard Time, slide the switch to AIRSON to subtract one hour (-1 hr).

3. Cùl-taic bataraidh

The clock comes with a pre-installed CR2032 button cell battery. This battery retains time settings during power outages. It is located in a screw-secured compartment at the bottom of the clock.

Stiùireadh Obrachaidh

Figure 3: Top panel controls and display indicators.

1. A ’suidheachadh an inneal-rabhaidh

1. Brùth an SET ALARM button once. The alarm time will flash on the display.
2. Brùth an UAIR SET button to adjust the alarm hour. Observe the PM indicator for correct AM/PM setting.
3. Brùth an SET GEÀRR-CHUNNTAS putan gus am mionaid rabhaidh atharrachadh.
4. Brùth an SET ALARM button again to confirm and exit alarm setting mode.

2. Turning Alarm On/Off

• To turn the alarm ON, brùth an ALARM AIR / OFF button. The alarm indicator light on the display will illuminate.
• To turn the alarm AIRSON, brùth an ALARM AIR / OFF button again. The alarm indicator light will turn off.

3. Gnìomh Snooze

Nuair a chluinneas tu an inneal-rabhaidh, brùth air a’ phutan mhòr SNOZE button located on the top of the clock. The alarm will temporarily stop and sound again after approximately 9 minutes.

4. Smachd Dimmer

Gus soilleireachd an taisbeanaidh LED atharrachadh:

• Brùth an DIMMER HI/LO putan gus gluasad eadar roghainnean soilleireachd àrd is ìosal.

Figure 4: Display brightness adjustment.

Cumail suas

Ath-chur Bataraidh (CR2032)

The pre-installed CR2032 battery is designed to last for several years. If the clock loses time during a power outage, the battery may need replacement.

1. Unplug the clock from the electrical outlet.
2. Locate the screw-secured battery compartment on the bottom of the clock.
3. Unscrew the compartment cover and carefully remove the old CR2032 battery.
4. Insert a new CR2032 battery, ensuring the correct polarity (+ side up).
5. Cuir còmhdach na roinne air ais agus daingnich e leis an sgriubha.
6. Plug the clock back into the electrical outlet.

Thoir an aire: Cuir às do sheann bataraidhean gu cùramach a rèir riaghailtean ionadail.

Fuasgladh thrioblaidean

Sònrachaidhean

• Brand: biorach
• Modail: B089ZMSR39
• Dath: Black-red Led
• Seòrsa taisbeanaidh: Didseatach
• Feart sònraichte: Suidheachadh fèin-ghluasadach
• Meudan toraidh: 5.5"L x 2.6"À
• Stòr cumhachd: Electric Corded
• Bataraidh cùl-taic: 1 x CR2032 Lithium Ion (included)
• Cuideam nì: 10.2 Unns
• UPC: 049353004426
• Dèanadair: biorach

Figear 5: Meudan an toraidh.

Fiosrachadh a bharrachd

For further assistance or product inquiries, please refer to the official Sharp weblàrach-lìn no cuir fios chun taic teachdaiche aca.

Tha an toradh seo air a dhealbhadh airson cleachdadh a-staigh a-mhàin.