Leabhar-stiùiridh Siostam Micreofon gun Uèir VeGue WM-2 UHF

Ro-ràdh

This manual provides detailed instructions for the setup, operation, and maintenance of your VeGue WM-2 UHF Wireless Microphone System. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Susbaint pacaid

The VeGue WM-2 Wireless Microphone System package includes the following items:

• 2 x Micreofonan-làimhe
• 1 x Rechargeable Receiver (6.35mm plug)
• 2 x Anti-slip Rings
• 2 x Mic Covers (foam windscreens)
• 1 x càball cosgais USB
• 1 x Leabhar-làimhe Cleachdaiche

Image: VeGue WM-2 Wireless Microphone System components, including two microphones and the receiver.

Feartan toraidh

• Teicneòlas gun uèir UHF: Designed for stable signal transmission and reduced interference compared to VHF systems.
• Obrachadh dà-sheanail: Supports two handheld microphones simultaneously.
• Raon leudaichte: Provides a stable signal distance of up to 200 feet (60 meters).
• Multiple Frequency Options: Offers 15 selectable frequency options per channel, allowing up to 15 sets of microphones to be used concurrently without interference.
• Ath-riochdachadh fuaim soilleir: Equipped with a professional chipset and built-in noise reduction cotton for clear audio output.
• Rechargeable Receiver: The portable receiver features a built-in rechargeable battery, offering 4-6 hours of working time after a 2-3 hour charge.
• Togail seasmhach: Both microphones and the receiver body are constructed from aluminum alloy for durability and lightweight handling.
• Suidheachadh furasta: Plug-and-play functionality with automatic pairing between microphones and receiver.
• Co-fhreagarrachd farsaing: Compatible with devices featuring a 1/4" (6.35mm) MIC jack, such as karaoke speakers, power ampliifiers, agus siostaman PA. Note: Not suitable for direct connection to phones or computers.

Ìomhaigh: Mion-fhiosrachadh view of the microphone's construction and display.

Image: Illustration of the 200ft stable UHF transmission signal range.

Stiùiridhean rèiteachaidh

Follow these steps to set up your VeGue WM-2 Wireless Microphone System:

1. Cuir cosgais air a ’ghlacadair: Before first use, ensure the receiver is fully charged using the provided USB cable. The charging time is approximately 2-3 hours. Do not use the receiver while it is charging to prevent potential damage.
2. Insert Batteries into Microphones: Each handheld microphone requires 2 x AA batteries (not included). Unscrew the bottom part of the microphone to access the battery compartment and insert the batteries, observing polarity.
3. Turn on the Receiver: Locate the ON/OFF switch on the receiver and slide it to the 'ON' position. The indicator light will illuminate.
4. Turn on the Microphones: Press and hold the power button on each microphone until the display screen illuminates. The microphones will automatically pair with the receiver.
5. Connect the Receiver to an Audio Device: Plug the 1/4" (6.35mm) jack of the receiver directly into the MIC input of your karaoke speaker, power amplifer, no siostam PA.
6. Atharraich an tomhas-lìonaidh: Adjust the volume on your audio device and the microphone (if applicable) to your desired level.

Image: Visual guide for easy setup of the microphone system.

Video: Official product video demonstrating the setup and features of the VeGue WM-2 Wireless Microphone.

Stiùireadh Obrachaidh

• Cumhachd air / dheth: Use the power button on each microphone and the switch on the receiver to turn the units on or off.
• Atharrachadh tricead: Each microphone has 15 adjustable frequencies. If you experience interference, you can change the channel on the microphone. To do this, unscrew the bottom part of the microphone to reveal a small button. Press this button to cycle through available frequencies until a clear channel is found.
• Inbhe bataraidh: The microphone display shows the current channel and battery status. The receiver also has indicator lights for RF signal and charging status.
• Cleachdadh as Fheàrr: For best performance, maintain a clear line of sight between the microphones and the receiver. Avoid placing the receiver near large metal objects or other electronic devices that may cause interference.

Image: Charging and working time details for the rechargeable receiver.

Cumail suas

• Glanadh: Use a soft, dry cloth to clean the exterior of the microphones and receiver. Do not use liquid cleaners or abrasive materials.
• Stòradh: Stòraich an siostam ann an àite fionnar, tioram air falbh bho sholas dìreach na grèine agus teòthachd anabarrach nuair nach eilear ga chleachdadh.
• Cùram Bataraidh: Remove AA batteries from the microphones if they will not be used for an extended period to prevent leakage. Recharge the receiver periodically even if not in use to maintain battery health.
• Microphone Covers: The included foam mic covers help protect the microphone capsule from dust and moisture and can reduce plosive sounds. Replace them if they become worn or damaged.

Fuasgladh thrioblaidean

Sònrachaidhean

Barantas agus Taic

VeGue products are designed for reliability and performance. For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your product packaging or visit the official VeGue weblàrach. Cùm dearbhadh ceannach airson adhbharan barantais.