MOUNTUP Monitor Mount Instruction Manual

1. Ro-ràdh

Thank you for choosing the MOUNTUP Single Computer Monitor Stand. This full motion gas spring desk monitor arm is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor. It is compatible with most flat and curved computer monitors from 17 to 32 inches, supporting a maximum weight of 17.6 lbs. This manual will guide you through the installation, operation, and maintenance of your new monitor mount.

2. Fiosrachadh Sàbhailteachd

Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage. If you have any questions, please contact MOUNTUP customer support.

• Na gabh thairis air a’ chomas cuideam as àirde de 17.6 lbs (8 kg).
• Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitor.
• Always keep the arm in a horizontal position during gas spring tension adjustment to prevent injury or damage.
• Use all provided hardware and follow the installation steps precisely.
• Cùm clann is peataichean air falbh rè an stàladh.

3. Liosta Pacaidh

Dèan cinnteach gu bheil na pàirtean uile an làthair agus gun mhilleadh mus tòisich thu air an stàladh.

Figure 3.1: Key features and compatibility of the MOUNTUP monitor mount.

Bu chòir a 'phacaid a bhith a' gabhail a-steach:

• Co-chruinneachadh Gàirdean Sgrùdaidh (Gàirdeanan Uachdarach is Ìochdarach)
• Desk Pole
• C-Clamp Bunait
• Grommet Base Components
• Pleit VESA
• All necessary screws, washers, and Allen keys
• Leabhar-làimhe stiùiridh

4. Setup agus Stàladh

Choose between C-Clamp or Grommet mounting based on your desk type and preference.

Figure 4.1: The monitor mount offers both C-Clamp and Grommet mounting options.

4.1 C-Clamp Stàladh

1. Ceangail an C-clamp base to the desk pole using the provided screws and Allen key.
2. Position the assembled clamp and pole on the edge of your desk.
3. Dèan teannachadh air an C-clamp screw until the mount is securely fastened to the desk. Ensure it is stable and does not wobble.

4.2 Grommet Installation

1. Disassemble the C-clamp by removing the screw and plate.
2. Insert the desk pole through the grommet hole in your desk.
3. Secure the pole from underneath the desk using the grommet base plate and tightening knob.

4.3 Attaching VESA Plate to Monitor

1. Cuir do sgrìn gu faiceallach le aghaidh sìos air uachdar bog, glan.
2. Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm).
3. Secure the VESA plate to the monitor using the appropriate screws. Do not overtighten.

4.4 Attaching Monitor to Arm

1. Slide the VESA plate with the attached monitor onto the monitor arm's mounting head.
2. Ensure the monitor is fully seated and then tighten the security bolt to prevent accidental detachment.

4.5 Stiùireadh Càbaill

Route your monitor cables through the integrated cable management clips on the arm and pole to maintain a tidy workspace.

Figure 4.2: Effective cable management keeps your desk organized.

4.6 Stiùireadh Bhidio Stàlaidh

Video 4.1: A detailed installation guide for the MOUNTUP Single Monitor Mount (MU0025).

5. Obrachadh agus Atharrachaidhean

The MOUNTUP monitor arm offers full motion capabilities for optimal viewing comhfhurtachd.

Figure 5.1: The monitor arm provides extensive adjustability for ergonomic positioning.

5.1 Gas Spring Tension Adjustment

Adjust the gas spring tension to match your monitor's weight for smooth and stable positioning. Keep the arm in a horizontal position during adjustment.

Figure 5.2: Adjusting the gas spring tension for optimal monitor support.

• If the arm shoots up: Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
• If the arm falls down: Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.

5.2 Teilt Atharrachadh

The monitor can tilt +90° (up) and -45° (down) to reduce glare and optimize viewing ceàrnan.

• Loosen the tilting bolt on the VESA plate.
• Position the screen to your desired angle.
• Retighten the tilting bolt to fix the angle.

5.3 Cuairteachadh agus Rothladh

The arm allows for extensive swivel and 360° rotation for landscape or portrait orientation.

Figure 5.3: Achieve perfect viewing angles with 360-degree rotation.

• Lower Arm Swivel: ±135°
• Upper Arm Swivel: ±180°
• Screen Swivel: ±90°
• Screen Rotation: 360°

5.4 Adjustment Video Guide

Video 5.1: Guide to Gas Spring Tension & Tilting Adjustment for MOUNTUP Monitor Mount (MU0025).

Video 5.2: Demonstration of the MOUNTUP Single Monitor Desk Mount (MU0025) functions.

6. Cumail suas

Regular maintenance ensures the longevity and optimal performance of your monitor mount.

• Glanadh: Sguab am beinn le clò bog,amp clò. Seachain innealan-glanaidh sgrìobach no fuasglaidhean a dh’ fhaodadh milleadh a dhèanamh air a’ chrìochnachadh.
• Sgrùdadh: Periodically check all screws and connections to ensure they are tight and secure. Retighten if necessary.
• Earrach Gas: If the gas spring tension feels off, refer to Section 5.1 for adjustment instructions.

7. A ’dèanamh trioblaid

Ma thachras tu ri duilgheadasan sam bith, thoir sùil air na duilgheadasan agus na fuasglaidhean cumanta a leanas:

• Monitor arm falls down or shoots up: This indicates incorrect gas spring tension. Refer to Section 5.1 for proper adjustment based on your monitor's weight.
• Monitor tilts forward or backward unexpectedly: The tilting bolt may be loose. Refer to Section 5.2 to loosen, adjust, and retighten the tilting bolt.
• Mount feels unstable or wobbly: Dèan cinnteach gu bheil an C-clamp or grommet base is securely tightened to the desk. Check all connection points on the arm and VESA plate.
• Duilgheadas a’ gluasad a’ ghàirdein: The tension might be too high for a lighter monitor, or the joints might need lubrication (though typically not required for gas spring arms). Ensure no cables are snagged.

Ma mhaireas na duilgheadasan, cuir fios gu taic luchd-cleachdaidh.

8. Sònrachaidhean

9. Barantas agus Taic

All MOUNTUP monitor mounts are backed by 3-year support. Our friendly customer support team is available to answer any questions within 12 hours. For assistance, please visit the official MOUNTUP website or contact us directly through your purchase platform.