Rapid Charger for Two-Way Radios

1. Toradh thallview

This rapid charger is engineered to efficiently charge batteries for a wide range of two-way radios. It supports multiple battery chemistries including Ni-CD, Ni-MH, and Li-ion, offering versatility and convenience. The charger incorporates advanced microprocessor control for optimal charge management and protection against overcharging.

Key features include a universal 100-240V input voltage, a clear LED indicator for charging status, and a rapid charging rate of up to 1000mAh per hour. The package typically includes one charger base and one AC power adapter.

Image: The WPLN4232 rapid charger base and its accompanying AC power adapter, shown connected and ready for use.

2. Stiùireadh Stèidheachaidh

1. Ceangail an inneal-atharrachaidh cumhachd AC: Insert the DC plug of the AC power adapter into the power input port located at the back of the charger base.


Ìomhaigh: Sealladh dlùth view of the back of the charger base, highlighting the power input port where the AC adapter connects.

2. Plug a-steach don Power Outlet: Plug the AC power adapter into a standard 100-240V wall outlet.
3. Initial Power Check: Once connected to power, the charger's LED indicator may briefly illuminate to confirm power reception.

3. Stiùireadh Obrachaidh

1. Cuir a-steach bataraidh: Carefully slide the battery (or radio with battery attached) into the charging slot of the charger base. Ensure the battery contacts align correctly with the charger's pins.


Ìomhaigh: Mion-fhiosrachadh view of the charger's slot, showing the contact pins where the radio battery connects for charging.

2. Cum sùil air inbhe cosgais: The LED indicator on the charger will display the charging status:
   • LED dhearg: A’ comharrachadh gu bheil am bataraidh ga luchdadh an-dràsta.
   • Uaine uaine: A’ nochdadh gu bheil am bataraidh làn chosgais.


Image: The underside of the charger base, illustrating the LED indicator and its corresponding charging status (red for charging, green for fully charged).

3. Thoir air falbh bataraidh: Once the LED turns green, the battery is fully charged and can be removed from the charger.

Modalan Rèidio Co-chòrdail:

• XPR Series: XPR4380, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR8300, XPR3000, XPR3500, XPR3300, XPR7000, XPR7550, XPR7350, XPR7580, XPR7380, XPR3000e, XPR3500e, XPR3300e, XPR7000e, XPR7550e, XPR7350e, XPR7580e, XPR7380e
• DP Series: DP3400, DP3401, DP3600, DP3601, DP4000, DP4400, DP4401, DP4600, DP4601, DP4800, DP4801
• DGP Series: DGP4150, DGP4150+, DGP6150, DGP6150+
• APX & R Series: APX4000, APX3000, APX1000, R7, R7A
• XiRP Series: XiRP8200, XiRP8208, XiRP8260, XiRP8268

Compatible Battery Models:

• PMNN4065, PMNN4066, PMNN4066A, PMNN4069, PMNN4077, PMNN4077C, PMNN4409, PMNN4409AR, PMNN4407, PMNN4807, PMNN4807A, PMNN4808, PMNN4808A, PMNN4809, PMNN4809A, PMNN4810, PMNN4810A, PMNN4407, PMNN4412, PMNN4435, PMNN4448, PMNN4489, PMNN4491, PMNN4493, PMNN4889, NNTN8128, NNTN8129, NNTN8287

4. Cumail suas

• Glanadh: Regularly wipe the charger base and contacts with a dry, soft cloth to prevent dust and debris buildup. Do not use liquid cleaners or solvents.
• Stòradh: Stòraich an charger ann an àite fionnar, tioram air falbh bho sholas dìreach na grèine agus teòthachd anabarrach nuair nach eilear ga chleachdadh.
• Làimhseachadh: Avoid dropping the charger or subjecting it to strong impacts, which could damage internal components.

5. A ’dèanamh trioblaid

• Charger gun a bhith a’ tionndadh air:
  • Ensure the AC power adapter is securely connected to both the charger base and a working wall outlet.
  • Dèan cinnteach gu bheil an t-ionad cumhachd gnìomhach.
• Battery Not Charging (Red LED not lit):
  • Check that the battery is properly seated in the charging slot and its contacts are aligned with the charger pins.
  • Inspect battery and charger contacts for dirt or damage. Clean if necessary.
  • The charger includes features for un-chargeable and low-health battery detection. If the battery is severely damaged or at the end of its life, it may not charge.
• Cìs slaodach:
  • Ensure the charger is used within its specified operating temperature range.
  • Verify that the battery is compatible with this rapid charger.

6. Sònrachaidhean

7. Barantas agus Taic

Specific warranty information for this product is not provided in the available documentation. For details regarding warranty coverage, please refer to the product packaging or contact the seller directly.

For technical support or further assistance, please reach out to the seller or manufacturer through their official contact channels.