Intel Wi-Fi 6 (Gig+) Desktop Kit AX200 User Manual

1. Ro-ràdh

This manual provides detailed instructions for the installation, operation, and maintenance of your Intel Wi-Fi 6 (Gig+) Desktop Kit AX200. This kit is designed to upgrade your desktop computer with Wi-Fi 6 (802.11ax) and Bluetooth 5.0 capabilities, offering enhanced wireless performance and security.

1.1 Susbaint a’ phacaid

Dearbhaich gu bheil na nithean gu lèir a tha air an liostadh gu h-ìosal an làthair anns a’ phacaid toraidh agad:

• Intel® Wi-Fi 6 AX200 (Gig+) adapter (M.2 2230 module)
• Optimized external antennas (2)
• Standard size mounting bracket with RF cables installed
• Ìosal profile bracaid sreap

Image 1.1: Contents of the Intel Wi-Fi 6 Desktop Kit AX200.

2. Setup agus Stàladh

Before proceeding with installation, ensure your computer is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

2.1 Riatanasan Co-chòrdalachd

• Motherboard must have an M.2 Key E slot.
• Operating System: Windows 10 64-bit.
• Not compatible with systems containing an Intel 9560 CNVI part or systems with a BIOS lock.

2.2 Ceumannan stàlaidh

1. Ullaich do choimpiutair: Power down your computer, unplug the power cord, and open the computer case.
2. Locate the M.2 Key E slot: Refer to your motherboard's manual to identify the M.2 Key E slot.
3. Install the AX200 module: Gently insert the Intel Wi-Fi 6 AX200 M.2 module into the M.2 Key E slot at a 30-degree angle. Press down and secure it with the provided screw (if not included, use a compatible M.2 screw from your motherboard accessories).
4. Attach RF cables to the module: Carefully snap the two small RF cables from the mounting bracket onto the corresponding connectors on the AX200 module. Ensure they are securely attached.
5. Install the mounting bracket: Choose either the standard or low-profile mounting bracket based on your PC case. Secure the bracket into an available PCIe slot opening on your computer case.
6. Connect external antennas: Screw the two optimized external antennas onto the connectors on the mounting bracket. Position the antennas for optimal signal reception.

Image 2.1: Components ready for installation, showing the M.2 module, cables, bracket, and antennas.

Image 2.2: The two external antennas.

2.3 stàlaich draibhear

After hardware installation, close your computer case, plug in the power cord, and power on your computer. Windows 10 should automatically detect and install the necessary drivers for the Intel Wi-Fi 6 AX200 module. If drivers are not automatically installed, or if you experience issues, download the latest drivers from the official Intel support weblàrach.

3. Obrachadh

3.1 A’ ceangal ri Wi-Fi

1. Once drivers are installed, click the Wi-Fi icon in the Windows taskbar.
2. Tagh an lìonra Wi-Fi a tha thu ag iarraidh bhon liosta de lìonraidhean a tha rim faighinn.
3. Briog air ‘Ceangail’ agus cuir a-steach iuchair tèarainteachd an lìonra (facal-faire) ma thèid iarraidh ort.
4. Your computer should now be connected to the Wi-Fi network.

3.2 A’ paidhreachadh innealan Bluetooth

1. Rach gu Roghainnean Windows > Innealan > Bluetooth & innealan eile.
2. Dèan cinnteach gu bheil Bluetooth air a thionndadh 'Air'.
3. Briog air “Cuir Bluetooth no inneal eile ris” agus tagh “Bluetooth”.
4. Cuir an inneal Bluetooth agad ann am modh paidhreachaidh (thoir sùil air leabhar-làimhe an uidheim agad).
5. Tagh an inneal agad bhon liosta agus lean stiùireadh sam bith air an sgrion gus am paidhir a chrìochnachadh.

Image 3.1: Bluetooth Wireless Technology Support.

4. Cumail suas

The Intel Wi-Fi 6 Desktop Kit AX200 requires minimal maintenance. Keep your computer's interior clean from dust to ensure proper airflow and prevent overheating of components. Regularly update your Wi-Fi and Bluetooth drivers from the official Intel weblàrach-lìn gus dèanamh cinnteach à coileanadh agus tèarainteachd as fheàrr.

5. A ’dèanamh trioblaid

5.1 Cùisean Coitcheann agus Fuasglaidhean

• Cha deach Wi-Fi no Bluetooth a lorg:
  • Ensure the AX200 module is correctly seated in the M.2 slot and secured.
  • Verify that the RF cables are securely connected to the module and antennas.
  • Check Device Manager in Windows to see if the device is recognized and drivers are installed. Reinstall drivers if necessary.
  • Confirm your motherboard has an M.2 Key E slot and is not subject to BIOS lock.
• Slow Wi-Fi speeds or frequent disconnections:
  • Ensure your router supports Wi-Fi 6 (802.11ax) for optimal performance.
  • Update your Wi-Fi drivers to the latest version from Intel's weblàrach.
  • Check antenna connections and position them for better signal.
  • Lùghdaich bacadh bho innealan dealain eile.
• Inneal Bluetooth gun a bhith a’ paidhreachadh:
  • Dèan cinnteach gu bheil Bluetooth air a chomasachadh ann an roghainnean Windows.
  • Cuir an inneal Bluetooth ann am modh càraid.
  • Thoir air falbh agus cuir an inneal ris a-rithist ann an roghainnean Bluetooth Windows.
  • Ùraich draibhearan Bluetooth.

Airson tuilleadh cuideachaidh, thoir sùil air taic Intel weblàrach-lìn no cuir fios gu seirbheis luchd-cleachdaidh Intel.

6. Sònrachaidhean

7. Barantas agus Taic

Intel products are backed by a limited warranty. For specific warranty terms and conditions applicable to your region, please refer to the documentation included with your product or visit the official Intel weblàrach.

7.1 Taic Teicnigeach

For technical assistance, driver downloads, and additional resources, please visit the official Intel Support weblàrach:

Taic Intel Weblàrach

Intel also offers support via phone and chat. Refer to the support weblàrach airson fiosrachadh conaltraidh.