Leabhar-stiùiridh airson timer geall gàrraidh didseatach rothlach a-muigh myTouchSmart 48707

Ro-ràdh

This manual provides detailed instructions for the safe and efficient operation of your myTouchSmart 48707 Rotatable Outdoor Digital Yard Stake Timer. Please read this manual thoroughly before installation and use, and retain it for future reference. This device is designed to automate outdoor lighting and other electrical appliances with programmable on/off times, light-sensing technology, and multiple grounded outlets.

Fiosrachadh Sàbhailteachd Cudromach

• Cunnart bho clisgeadh dealain: Use only with a GFCI-protected outdoor outlet. Do not immerse in water.
• Suidheachadh ceart: Ensure the timer is properly grounded.
• Dìon Overload: Do not exceed the maximum electrical rating of 125V, 60 Hz, 1875W (15A) general/resistive.
• Suidheachadh: Place the stake in a location with direct access to sunlight for optimal light sensor function. Ensure the unit is at least 1 foot above ground level to prevent waterlogging.
• Còmhdach a-muigh: Keep individual self-closing protective outlet covers closed when not in use to prevent moisture and debris entry.
• Stiùireadh corda: Route cords to prevent tripping hazards and damage.
• Cumail suas: Dì-cheangail an cumhachd mus dèan thu obair-chàraidh no glanadh sam bith.

Susbaint pacaid

• myTouchSmart Rotatable Outdoor Digital Yard Stake Timer (Model 48707)
• Ground Stake (multi-section)
• Leabhar-làimhe stiùiridh

Feartan toraidh

• Rotatable Outlets: Six grounded outlets, three of which rotate 180 degrees for flexible access.
• Uaireadair didseatach: Programmable with custom ON/OFF times.
• Sensor Solais: Automatic dusk-to-dawn operation or 6-hour countdown after sunset.
• Frith-shìde: Durable construction with self-closing protective outlet covers.
• 10ft Cord: Provides extended reach for outdoor placement.
• Dìon Overload: Integrated 15A/1875W circuit breaker for safety.

Suidhich

1. Cruinnich an Stake: Attach the stake sections together and then to the timer unit.
2. Suidheachadh: Insert the assembled stake firmly into the ground in your desired outdoor location. Ensure the timer unit is at least 1 foot above ground level and has direct access to sunlight if using light-sensing features.
3. Ceangal Cumhachd Tùsail: Plug the timer's power cord into a GFCI-protected outdoor outlet. If the display is blank, allow the timer to charge for at least 30 minutes to power the internal battery.
4. Ath-shuidhich an timer: Using a small, non-metallic, insulated tool (like a pencil tip or toothpick), press the ATHARRACHADH button located on the control panel. The LCD display will illuminate and show "12:00 AM".
5. Ceangail innealan: Plug your outdoor lights or appliances into the grounded outlets. Rotate the outlets as needed for optimal cord management. Close the protective covers over unused outlets.

Stiùireadh Obrachaidh

1. Setting Day & Time

1. Brùth agus cùm an CLOC putan.
2. Fhad 'sa tha e a' cumail CLOC, brùth an SEACHDAIN button repeatedly until the desired day of the week appears at the top of the display.
3. Lean air adhart a 'cumail CLOC, agus brùth air an UAIR button repeatedly to set the current hour (AM/PM will adjust automatically).
4. Still holding CLOC, brùth an MIN brùth air a’ phutan a-rithist is a-rithist gus am mionaid làithreach a shuidheachadh.
5. Sgaoil an CLOC putan gus na roghainnean a shàbhaladh.

2. Setting Programs (ON/OFF Times)

The timer allows for two custom ON/OFF programs. Follow these steps for each program:

1. Brùth an PROG button once. The display will show "1 ON" at the bottom left. This indicates you are setting the ON time for Program 1.
2. Brùth an SEACHDAIN button repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or various combinations).
3. Brùth an UAIR putan gus an uair ON a tha thu ag iarraidh a shuidheachadh.
4. Brùth an MIN putan gus am mionaid ON a tha thu ag iarraidh a shuidheachadh.
5. Brùth an PROG button again. The display will show "1 OFF". This indicates you are setting the OFF time for Program 1.
6. Repeat steps 2-4 to set the desired OFF day(s), hour, and minute for Program 1.
7. To set Program 2, press the PROG button again until "2 ON" appears, then repeat steps 2-6.
8. Às dèidh dhut na prògraman uile a tha thu ag iarraidh a shuidheachadh, brùth air a’ phutan CLOC putan gus tilleadh chun phrìomh sgrion.

To clear a program: Fhad 's a tha viewing the program (e.g., "1 ON" or "1 OFF"), press the R (Reset) button. Four dashes will appear, indicating the program is cleared. Press R again to reactivate it.

3. Auto/Manual Settings

To use your programmed settings, the timer must be in AUTO mode. To switch between modes:

• Brùth agus cùm an LAOIDH button for 4 seconds. The display will cycle through AUTO ON, AUTO OFF, and MANUAL.
• AUTO AIR: The timer will remain ON until the next programmed OFF time.
• AUTO OFF: The timer will remain OFF until the next programmed ON time.
• LÀRACH: The timer will ignore all programmed settings and act as a simple ON/OFF switch.

4. Light Sensor Modes (Dusk-to-Dawn, Countdown)

The timer features light-sensing technology for automatic operation based on ambient light. Ensure the light sensor (located on the top of the unit) is unobstructed and receives direct sunlight for optimal performance.

• Dusk-to-Dawn: The timer will automatically turn ON at dusk and remain ON until dawn.
• Timer Countdown: The timer will turn ON at dusk and remain ON for a preset duration (e.g., 6 hours).

Refer to the specific button on your timer labeled "Sensor" or "Timer" to cycle through these modes. The product description mentions "6-Hour Countdown" and "dawn to dusk" as presets.

5. Security/Vacation Mode (Random Function)

This mode randomly adjusts your programmed ON/OFF times to give your home a lived-in appearance, deterring potential intruders. To activate this feature, you must have at least one program set for longer than 33 minutes.

1. Brùth an SEACHDAIN agus UAIR buttons simultaneously. "RND" will appear to the right of the display, indicating Random mode is active.
2. In this mode, programmed ON/OFF times will be randomly postponed by 2 to 32 minutes.
3. Gus a dhì-ghnìomhachadh, brùth air a’ phutan SEACHDAIN agus UAIR buttons simultaneously again. "RND" will disappear.

6. Daylight Saving Mode

To adjust the time for Daylight Saving:

1. Brùth an UAIR agus MIN buttons simultaneously. The time will adjust by one hour forward or backward.
2. This function must be manually enabled or disabled as needed.

Cumail suas

• Regularly inspect the timer and cord for any signs of damage, fraying, or wear.
• Keep the light sensor clean and free from debris to ensure accurate dusk/dawn detection.
• Ensure all unused outlets have their protective covers securely closed.
• Glan an aonad le inneal bog, damp aodach. Na cleachd ceimigean cruaidh no innealan-glanaidh sgudail.

Fuasgladh thrioblaidean

Sònrachaidhean

Barantas agus Taic

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the myTouchSmart official weblàrach. Cùm do chuidhteas ceannach mar dhearbhadh ceannach.