Leabhar-làimhe Cleachdaiche Uaireadair Analogach is Didseatach VISION Talking

Ro-ràdh

Thank you for choosing the VISION Talking Analog and Digital Watch. This watch is designed to provide clear time announcements in Spanish, making it ideal for individuals with visual impairments, children, and the elderly. It features both an analog display for traditional time-telling and a digital display for precise readings, along with an alarm function.

Figear 1: Aghaidh view of the VISION Talking Analog and Digital Watch.

Suidhich

1. Dì-phapadh agus sgrùdadh tùsail

Carefully remove the watch from its packaging. Inspect the watch for any visible damage. The watch comes with a battery pre-installed and is ready for initial setup.

Figure 2: The watch as it appears in its original clear plastic case.

2. Initial Time Setting (Digital)

The digital time needs to be set first. Refer to the 'Operating Instructions' section for detailed steps on setting the digital time using the 'MODE', 'HOUR', and 'MINUTE' buttons.

3. Initial Time Setting (Analog)

The analog hands are set independently using the crown (small knob) on the side of the watch. Pull out the crown and rotate it to adjust the analog hands to match the digital time. Push the crown back in to secure the setting.

Stiùireadh Obrachaidh

Gnìomhan Putan

• Putan MODE: Used to cycle through different modes (Time, Alarm Setting).
• TALKING Button: Press to hear the current time announced in Spanish.
• Putan UAIR: Used to adjust the hour in setting modes.
• MINUTE Button: Used to adjust the minute in setting modes.
• Crùn: Used to set the analog hands.

Telling Time

• Fiosrachadh Gutha: Brùth an A ’GABHAIL button to hear the current time spoken aloud in Spanish.
• Taisbeanadh didseatach: The digital display shows the time in a 12-hour format (AM/PM).
• Taisbeanadh Analog: The traditional hands indicate the hour and minute.

A 'suidheachadh ùine didseatach

1. Brùth an MODE button repeatedly until the digital display shows the time setting mode (often indicated by flashing digits).
2. Cleachd an UAIR button to adjust the hour. Pay attention to AM/PM indicators.
3. Cleachd an MIONAID putan gus na mionaidean atharrachadh.
4. Brùth an MODE button again to confirm and exit the time setting mode.

A 'suidheachadh inneal-rabhaidh

1. Brùth an MODE button until the alarm setting mode is displayed (often indicated by an alarm icon or 'AL').
2. Cleachd an UAIR putan gus an uair rabhaidh a tha thu ag iarraidh a shuidheachadh.
3. Cleachd an MIONAID putan gus na mionaidean rabhaidh a tha thu ag iarraidh a shuidheachadh.
4. Brùth an MODE button to activate the alarm and exit the setting mode.
5. To turn off a sounding alarm, press any button.

Cumail suas

Glanadh

Gus an uaireadair agad a ghlanadh, sguab e gu socair le clò bog, tioram. Airson salachar stòlda, cuir beagan uisge air.amp cloth can be used, but ensure no moisture enters the watch. Avoid using harsh chemicals or abrasive materials.

Ath-nuadhachadh bataraidh

The watch uses a Lithium-metal battery. When the voice announcement becomes faint or the digital display dims, it's time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and function.

Frith-aghaidh uisge

This watch is marked as "WATER RESISTANT." This typically means it can withstand splashes, rain, or brief immersion in water, such as washing hands. It is chan eil suitable for swimming, showering, or diving. Prolonged exposure to water or submersion may cause damage.

Fuasgladh thrioblaidean

• No Voice Announcement:
  • Check battery level. Replace if low.
  • Ensure the TALKING button is pressed firmly.
• Tha an taisbeanadh didseatach bàn no dorcha:
  • Battery may be depleted. Replace the battery.
• Tha an ùine mì-chruinn:
  • Re-set the digital time following the instructions in the 'Operating Instructions' section.
  • Ensure the analog hands are synchronized with the digital time by adjusting the crown.
  • Low battery can affect timekeeping accuracy. Consider battery replacement.
• Alarm gun fhuaim:
  • Ensure the alarm is set correctly and activated.
  • Thoir sùil air ìre bataraidh.

Sònrachaidhean

Figure 3: Watch face diameter measurement (40 mm).

Figure 4: Watch case thickness measurement (16 mm).

Figure 5: Watch strap width measurement (18 mm).

Figear 6: Examples of wrist circumference fit (20 cm and 12 cm).

Barantas agus Taic

For warranty information or technical support, please refer to the documentation included with your purchase or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.