EDUP EP-9651GS-R PCI-E WiFi 6 Network Card with Bluetooth 5.2 Instruction Manual

1. Ro-ràdh

This manual provides comprehensive instructions for the installation, operation, and maintenance of your EDUP EP-9651GS-R PCI-E WiFi 6 Network Card. This device is designed to enhance your desktop PC's wireless connectivity with Wi-Fi 6 (802.11ax) technology and Bluetooth 5.2 capabilities, compatible with Windows 10 and Windows 11 64-bit operating systems. Please read this manual carefully before installation to ensure proper setup and optimal performance.

2. Pasgan-susbaint

Dearbhaich gu bheil na nithean uile a tha air an liostadh gu h-ìosal air an toirt a-steach sa phacaid agad. Ma tha nithean sam bith a dhìth no millte, cuir fios chun neach-reic agad.

• 1 x EDUP EP-9651GS-R PCI-E WiFi 6 Network Card
• 2 x 6dBi Dual Band Antennas
• 1 x Bluetooth 9-pin USB Cable
• 1 x Ìosal-profile Bracket (for small form factor PCs)
• 1 x screwdriver
• Sgriubha stàladh
• 1 x Driver CD (or download instructions)

3. Setup agus Stàladh

3.1 Stàladh bathar-cruaidh

Follow these steps to install the network card into your desktop PC. Ensure your computer is powered off and unplugged before proceeding.

1. Ullaich do PC: Power off your computer and unplug the power cord. Open the side panel of your PC case.
2. Locate a PCI-E slot: Identify an available PCI-E X1, X4, X8, or X16 slot on your motherboard. This card is not compatible with standard PCI slots.
3. Cuir a-steach a’ chairt lìonraidh: Carefully align the network card with the chosen PCI-E slot and press it firmly until it is securely seated.
4. Connect the Bluetooth Cable: Locate the 9-pin USB header (often labeled F_USB) on your motherboard. Connect the white end of the provided Bluetooth 9-pin USB cable to the corresponding port on the network card, and the other end to the 9-pin USB header on your motherboard. This connection is essential for Bluetooth functionality.
   

   Image: The Bluetooth 9-pin USB cable connecting the EDUP WiFi 6 card to the motherboard's USB header.

5. Sàbhail a’ chairt: Use the provided screws to secure the network card's bracket to your PC case. If you have a small form factor PC, use the included low-profile bracaid.
6. Ceangail Antennas: Screw the two 6dBi dual-band antennas onto the connectors at the back of the network card. Adjust their position for optimal signal reception.
   

   Image: The EDUP WiFi 6 network card with its two external antennas installed on the rear of a PC case.
7. Dùin Cùis PC: Replace the side panel of your PC case and reconnect the power cord.

3.2 stàlaich draibhear

After hardware installation, you need to install the drivers for both Wi-Fi and Bluetooth functionality. This card is compatible with Windows 10/11 64-bit.

1. Using the Driver CD: Insert the provided driver CD into your optical drive and follow the on-screen instructions to install the Wi-Fi and Bluetooth drivers.
2. Downloading Drivers: If your PC does not have an optical drive or if you encounter issues with the CD, download the latest drivers from the official Intel weblàrach no an EDUP weblàrach (szedup.com). Lorg airson drivers compatible with the Intel AX200 chipset.
3. Pròiseas Stàladh: Run the downloaded driver setup files. Follow the prompts, accepting the license agreements and completing the installation. A system restart may be required after installation.

4. Stiùireadh Obrachaidh

4.1 A’ ceangal ri Wi-Fi

Once the drivers are installed, you can connect to a wireless network:

1. Click the Wi-Fi icon in the system tray (usually in the bottom-right corner of your screen).
2. Tagh an lìonra Wi-Fi a tha thu ag iarraidh bhon liosta.
3. Briog air “Ceangail” agus cuir a-steach iuchair tèarainteachd an lìonra (facal-faire) ma thèid iarraidh ort.
4. Your PC should now be connected to the Wi-Fi network.

4.2 A’ ceangal innealan Bluetooth

To connect Bluetooth devices, ensure the Bluetooth 9-pin cable is correctly installed.

1. Rach gu Roghainnean Windows > Innealan > Bluetooth & innealan eile.
2. Ensure Bluetooth is turned "On".
3. Briog air “Cuir Bluetooth no inneal eile ris” agus tagh “Bluetooth”.
4. Cuir an inneal Bluetooth agad ann am modh pairing.
5. Tagh an inneal agad bhon liosta agus lean stiùireadh sam bith air an sgrion gus am paidhir a chrìochnachadh.

5. Sònrachaidhean

6. A ’dèanamh trioblaid

If you encounter issues with your EDUP network card, refer to the following common solutions:

• Cha deach Wi-Fi no Bluetooth a lorg:
  • Ensure the card is securely seated in the PCI-E slot.
  • Verify that the Bluetooth 9-pin USB cable is correctly connected to both the card and the motherboard.
  • Check Device Manager in Windows to see if the Wi-Fi and Bluetooth adapters are recognized and have no error symbols.
  • Reinstall the latest drivers from the Intel or EDUP weblàrach.
• Poor Wi-Fi signal or slow speeds:
  • Adjust the position of the external antennas for better reception.
  • Ensure your router supports Wi-Fi 6 (802.11ax) for optimal performance.
  • Thoir sùil airson eadar-theachd bho innealan eileagtronaigeach eile.
  • Ùraich firmware an router agad.
• Bluetooth nach eil ag obair:
  • Confirm the Bluetooth 9-pin USB cable is connected. This cable is mandatory for Bluetooth functionality.
  • Dèan cinnteach gu bheil Bluetooth air a chomasachadh ann an roghainnean Windows.
  • Reinstall the Bluetooth driver.

7. Barantas agus Taic

EDUP provides a 3-year manufacturer replacement warranty for this product. Additionally, a 90-day no-questions-asked return policy is offered. For any assistance, technical support, or warranty claims, please contact us via Amazon message. We are committed to providing prompt and helpful service.