Ro-ràdh
The Perel EDIN305N is a 230V 16A 3600W DIN-rail mount digital weekly timer designed for indoor use. This device allows for precise, programmable control of electrical circuits, enabling automatic switching ON and OFF of connected appliances or lighting systems over a weekly cycle. It features a clear digital display and multiple programming options to suit various scheduling needs.
Ceumannan Sàbhailteachd
RABHADH: Electrical installation should only be performed by a qualified electrician. Incorrect wiring can lead to electric shock, fire, or damage to the device and connected equipment. Always disconnect power at the main circuit breaker before installation or maintenance.
- Ensure the power supply matches the device's specifications (230V~50Hz).
- Do not exceed the maximum load capacity of 16A / 3600W.
- This device is designed for indoor use only. Avoid exposure to moisture, dust, or extreme temperatures.
- Na feuch ri an inneal fhosgladh no a chàradh thu fhèin. Thoir aire do luchd-obrach teisteanasach airson a h-uile seirbheis.
- Cùm a-mach à ruigsinn chloinne.
Bathar seachadview
The Perel EDIN305N digital timer consists of a main body with a digital display, control buttons, and terminal blocks for electrical connections. A transparent cover protects the display and buttons.
Figear 1: Aghaidh view of the Perel EDIN305N Digital Weekly Timer. The image displays the LCD screen, control buttons (R, W+, H+, M+, C+, Clock, Manual, RES/RCL), and numbered terminal blocks (1, 2 at the top, 3, 4, 5 at the bottom).
Putanan smachd:
- R: Reset button (recessed).
- W+: Weekday setting.
- H+: Suidheachadh uair a thìde.
- M+: Minute setting.
- C+: Clear program.
- Ìomhaigh cloc: Used to set current time and day, and to exit programming mode.
- LÀRACH: Manual override for ON/AUTO/OFF modes.
- RES/RCL: Reset/Recall program.
Blocaichean crìochnachaidh:
- 1, 2: Power supply input (N, L).
- 3, 4, 5: Output terminals for controlled circuit (Common, Normally Open, Normally Closed).
Sònrachaidhean Teicnigeach
| Paramadair | Luach |
|---|---|
| Modail Àireamh | EDIN 305 n |
| Voltage | 230V ~ 50Hz |
| Max. Gnàthach | 16A |
| Max. Cumhachd | 3600W |
| Àireamh de shuidheachaidhean | 7 (ON/OFF programs) |
| Seòrsa stàladh | DIN-Rèile |
| Meudan (L x W x H) | 2.36 x 3.54 x 1.57 òirleach (60 x 90 x 40 mm) |
| Cuideam | 0.12 kg (4.2 unnsa) |
| Stuth | Plastaig |
| Dath | Geal |
| Bataraidhean a dhìth | No (internal battery for memory backup) |
Stàladh
1. Sreap
The Perel EDIN305N is designed for DIN-rail mounting. Securely attach the timer to a standard 35mm DIN-rail within an electrical enclosure. Ensure sufficient space for wiring and ventilation.
2. Sreangachadh
CUDROMACH: Ensure power is disconnected at the main circuit breaker before proceeding with wiring. Follow local electrical codes and regulations.
Figear 2: Taobh view of the Perel EDIN305N Digital Weekly Timer showing the electrical wiring diagram. It illustrates connections for Neutral (N), Live (L), and the output contacts (1, 2, 3, 4, 5) for controlling a load.
Refer to the wiring diagram (Figure 2) and the terminal block labels on the device:
- Connect the Neutral (N) wire of your 230V AC supply to terminal 1.
- Connect the Live (L) wire of your 230V AC supply to terminal 2.
- For the controlled circuit:
- Terminal 3: Common contact for the relay output.
- Terminal 4: Normally Open (NO) contact. The circuit connected here will be ON when the timer is active.
- Terminal 5: Normally Closed (NC) contact. The circuit connected here will be OFF when the timer is active.
- Connect the load (e.g., light, appliance) between the Live (L) supply and either terminal 4 (for NO operation) or terminal 5 (for NC operation), with terminal 3 connected to the Live (L) supply. Alternatively, connect the load between terminal 4 or 5 and the Neutral (N) supply, with terminal 3 connected to the Live (L) supply. Consult a qualified electrician for specific load wiring configurations.
Stàladh tùsail agus obrachadh
1. Power On and Reset
After wiring and restoring power, the display will illuminate. If the display is blank or shows erratic characters, press the recessed R (Reset) button using a pointed non-metallic object (e.g., a pen tip). This will clear all settings and restore default values.
2. A’ suidheachadh an Àm agus an Latha Làithreach
- Brùth agus cùm an Ìomhaigh cloc putan.
- Fhad 's a tha e a' cumail an Ìomhaigh cloc putan, brùth W+ to set the current day of the week (1=Monday, 7=Sunday).
- Fhad 's a tha e a' cumail an Ìomhaigh cloc putan, brùth H+ to set the current hour (0-23).
- Fhad 's a tha e a' cumail an Ìomhaigh cloc putan, brùth M+ to set the current minute (0-59).
- Sgaoil an Ìomhaigh cloc putan. Tha an t-àm agus an latha air an suidheachadh a-nis.
3. Programming ON/OFF Cycles
The timer supports up to 7 ON/OFF programs. Each program consists of an ON time and an OFF time.
- Brùth an Ìomhaigh cloc button once to enter programming mode. The display will show "1 ON".
- Brùth W+ to select the day(s) for this program. You can choose a single day, a block of days (e.g., Mon-Fri), or all days.
- Brùth H+ to set the ON hour for program 1.
- Brùth M+ to set the ON minute for program 1.
- Brùth an Ìomhaigh cloc button again. The display will show "1 OFF".
- Repeat steps 2-4 to set the OFF day(s), hour, and minute for program 1.
- To set additional programs (2-7), press the Ìomhaigh cloc button to cycle through "2 ON", "2 OFF", etc., and repeat the setting process.
- Às dèidh dhut na prògraman uile a tha thu ag iarraidh a shuidheachadh, brùth air a’ phutan LAOIDH brùth air a’ phutan gus am modh prògramaidh fhàgail agus tilleadh chun taisbeanadh ùine làithreach.
4. Stiùireadh làimhe
Brùth an LAOIDH button repeatedly to cycle through the operating modes:
- AIR: The output is continuously ON, overriding all programs.
- AUTO: The timer operates according to the programmed ON/OFF cycles.
- OFF: The output is continuously OFF, overriding all programs.
Dèan cinnteach gu bheil an timer air a shuidheachadh gu AUTO for programmed operation.
5. Clearing Programs
To clear a specific program:
- Enter programming mode by pressing the Ìomhaigh cloc button until the desired program number (e.g., "3 ON") is displayed.
- Brùth an C+ button. This will clear both the ON and OFF times for that specific program.
- Repeat for other programs as needed.
- Brùth LAOIDH gus am modh prògramadh fhàgail.
To clear all programs and reset the device, use the recessed R (Reset) button.
Cumail suas
- Glan an inneal le clò bog, tioram. Na cleachd innealan-glanaidh sgrìobach no fuasglaidhean.
- Ensure the transparent cover is closed to protect the display and buttons from dust and splashes.
- Regularly check electrical connections for tightness, especially in high-vibration environments.
Fuasgladh thrioblaidean
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Tha an taisbeanadh falamh. | No power supply; internal battery depleted. | Check power connections (terminals 1 & 2). Ensure main power is ON. If power is present, press the R (Reset) button. The internal battery recharges when connected to power. |
| Timer not switching ON/OFF as programmed. | Incorrect program settings; timer in manual ON/OFF mode. | Verify program settings (time, day, ON/OFF). Ensure the timer is in AUTO modh le putadh air an LAOIDH putan. |
| Connected appliance not receiving power. | Incorrect wiring; appliance fault; timer fault. | Check wiring according to Figure 2. Test the appliance directly. If wiring and appliance are fine, the timer may be faulty. |
| Buttons unresponsive or display erratic. | Software glitch; low internal battery. | Press the recessed R (Reset) button. Ensure the timer has been connected to power for at least 24 hours to fully charge the internal battery. |
Fuasgladh
Do not dispose of this product with general household waste. This electronic device contains materials that can be recycled. Please dispose of it at a designated collection point for electrical and electronic equipment waste, in accordance with local regulations.
Barantas agus Taic
Perel products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your local Perel distributor or retailer. Please have your model number (EDIN305N) and purchase details ready when contacting support.