Ro-ràdh
Welcome and thank you for choosing the MOUNTUP Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
Fiosrachadh Sàbhailteachd
Cùm na ceumannan sàbhailteachd a leanas an-còmhnaidh rè stàladh is cleachdadh:
- Comas cuideam: Do not exceed the maximum weight capacity of 88 lbs (40 kg). Overloading can result in serious injury or property damage.
- Structar Balla: Ensure the mounting surface (wall) can safely support the combined weight of the mount and the television.
- Liostaichte UL: This product is UL Listed, indicating it meets specific safety standards.
- Taic Proifeiseanta: Mura h-eil thu cinnteach mu phàirt sam bith den phròiseas stàlaidh, bruidhinn ri proifeasanta teisteanasach.
- Clann: Cùm clann air falbh bhon raon stàlaidh rè an stèidheachaidh.
- Innealan: Use appropriate tools and follow all instructions for their safe operation.
Susbaint pacaid
Before installation, verify that all components are present and undamaged. If any parts are missing or defective, contact MOUNTUP customer service.
- Co-chruinneachadh Plàta Balla
- Bracaid Tbh (2 phìos)
- Various TV Screws (M4, M6, M8)
- Spacers and Washers
- Lag Bolts and Concrete Anchors (for specific wall types)
- Ìre builgean
- Wrench
- Teamplaid stàlaidh
Sònrachaidhean
| Modail Àireamh | 28XTu2564 |
| Brand | MOUNTUP |
| Co-fhreagarrachd meud Tbh | 26 gu 65 òirleach |
| Comas Cuideam | 88 lbs (40 kg) |
| Co-fhreagarrachd VESA | Min: 75x75mm (3"x3"), Max: 400x400mm (16"x16") |
| Co-chòrdalachd Seòrsa Balla | 16" Wood Studs (Not for alone dry wall application). Concrete/Brick walls require anchors. |
| Ceàrn Teilt | +5 ° / -13 ° |
| Ceàrn swivel | ±45° (Maximum swivel angle depends on TV size) |
| Atharrachadh ìre | ±3° (Post-installation) |
| Astar balla | 3" gu 15.7" |
| Stuth | Alloy Steel |
Stàladh agus stàladh
Sgrùdaidhean ro-stàlaidh
Before you begin, it is crucial to confirm compatibility and prepare your installation area.
- Check TV VESA Pattern: Locate the four mounting holes on the back of your TV and measure the horizontal and vertical distance between them. This mount supports VESA patterns from 75x75mm to 400x400mm.
- Check TV Weight and Size: Ensure your TV weighs no more than 88 lbs (40 kg) and is between 26 and 65 inches.
- Thoir sùil air an t-seòrsa balla: This mount is designed for installation on 16-inch wood studs. For concrete or brick walls, specific anchors (included) are required. Na stàlaich air drywall leis fhèin.
Figure 1: Compatible Wall Types. The mount is suitable for 16-inch wood studs, concrete walls, and brick walls. Anchors are required for concrete and brick installations.
Figure 2: TV Size and VESA Compatibility. This mount fits TVs from 26 to 65 inches with VESA patterns ranging from 75x75mm to 400x400mm.
Ceumannan Stàladh
Follow these steps carefully for a secure installation. The main part of the TV mount is pre-assembled for convenience.
Figear 3: Os a chionnview of the 3-Step Easy Installation Process.
Ceum 1: Ceangail camagan ri Tbh
- Cuir an telebhisean agad gu faiceallach le aghaidh sìos air uachdar bog, glan gus casg a chur air milleadh air an sgrion.
- Cuir camagan an telebhisean còmhla ris na tuill-sreap air cùl an telebhisean agad.
- Tagh na sgriothan, na h-uinneagan, agus na fàsairean iomchaidh bhon phasgan bathar-cruaidh a bhios iomchaidh airson tuill-shreap an telebhisean agad.
- Securely fasten the brackets to the TV using a screwdriver. Do not overtighten.
Ceum 2: Ceangail Wall Plate gu Wall
- Determine the desired height and location for your TV.
- Use a stud finder to locate the center of two adjacent wood studs (16-inch spacing). Mark the pilot hole locations.
- For concrete or brick walls, use a drill to create pilot holes at the marked locations and insert the appropriate anchors.
- Position the wall plate against the wall, aligning the holes with your marks. Use the included bubble level to ensure it is perfectly horizontal.
- Secure the wall plate to the wall using the lag bolts (for wood studs) or anchors and bolts (for concrete/brick). Tighten all bolts firmly.
Figure 4: Stud Spacing Compatibility. Ensure your wall studs align with the mount's design for secure installation.
Step 3: Hang and Secure TV to Wall Plate
- Le cuideachadh, tog an telebhisean gu faiceallach leis na camagan ceangailte agus croch iad air a’ phlàta balla.
- Dèan cinnteach gu bheil an telebhisean suidhichte gu tèarainte air a’ phlàta balla.
- Locate the safety screws or locking mechanisms on the bottom of the TV brackets and tighten them to prevent accidental dislodging.
Stiùireadh Obrachaidh
This full motion TV mount allows for flexible adjustment of your TV's position to achieve optimal viewing ceàrnan.
A' gleusadh Viewann an Ceàrn
- Teilt: The mount allows for a tilt range of +5° (upward) to -13° (downward). Gently push or pull the top or bottom of your TV to adjust the vertical angle. This helps reduce glare from lights or windows and prevents neck strain.
Figure 5: Tilt Adjustment. Adjust the TV's vertical angle to minimize glare and enhance viewing comhfhurtachd.
- Sluasaid: The articulating arm allows the TV to swivel up to ±45° left or right. The maximum swivel angle depends on the size of your TV and its distance from the wall. Gently push the TV to the desired horizontal angle.
Figure 6: Swivel Adjustment. Reposition your TV horizontally for optimal viewa’ tighinn bho dhiofar àiteachan den t-seòmar.
- Leudachadh: The mount can extend your TV from 3 inches (retracted) to 15.7 inches (extended) from the wall. Pull the TV gently forward or push it back towards the wall.
- Ìre: After installation, you can make minor horizontal adjustments of ±3° to ensure your TV is perfectly level. This adjustment is typically done by loosening specific bolts on the TV brackets, adjusting, and then re-tightening. Refer to the detailed PDF manual for specific instructions.
Figure 7: Post-Installation Leveling. Fine-tune the TV's horizontal alignment after mounting.
Cumail suas
Bidh cumail suas cunbhalach a’ cuideachadh le bhith a’ dèanamh cinnteach gum mair balla-suidhe an telebhisean agad fad-beatha agus gum bi e ag obair gu sàbhailte.
- Glanadh: Sguab an sliabh le clò bog, tioram gus duslach a thoirt air falbh. Seachain innealan-glanaidh no fuasglaidhean sgrìobach a chleachdadh.
- Sgrùdaidhean ràitheil: Thoir sùil bho àm gu àm air na sgriothan is na boltaichean uile gus dèanamh cinnteach gu bheil iad fhathast teann. Teannaich a-rithist ma tha sin riatanach.
- Gluasad: If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints.
Fuasgladh thrioblaidean
Ma thachras tu ri duilgheadasan rè no às dèidh an stàlaidh, smaoinich air na fuasglaidhean cumanta a leanas:
- Tbh gun ìre: Use the post-installation leveling feature (±3°) as described in the Operating Instructions. Ensure the wall plate was installed level initially.
- Tha Beinn a’ faireachdainn sgaoilte: Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure the wall type is appropriate and anchors (if used) are correctly installed.
- Duilgheadas ag atharrachadh: Ensure no cables are snagged or obstructing movement. If joints are stiff, apply a small amount of lubricant.
- Pàirtean a dhìth: Refer to the Package Contents section. If parts are missing, contact MOUNTUP customer service.
Barantas agus Taic
MOUNTUP TV wall mount series are backed by a Plana dìon 3-bhliadhna. Our dedicated customer support team is available to answer any questions you may have regarding installation, operation, or product issues.
For further assistance or detailed diagrams, please refer to the official installation manual: