Leabhar-làimhe Cleachdaiche Measgadair Fuaime Bluetooth Proifeasanta Rolls RM169

1. Ro-ràdh

Tapadh leibh airson ceannachasing the Rolls RM169 Professional Bluetooth Audio Mixer. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new audio mixer. Please read this manual thoroughly before operating the unit to ensure optimal performance and longevity.

2. Stiùireadh Sàbhailteachd

Gus cunnart clisgeadh dealain, teine ​​no milleadh air an aonad a lùghdachadh, feuch an lean thu na ceumannan sàbhailteachd a leanas:

• Stòr cumhachd: Connect the unit only to the specified power supply as indicated on the unit or in this manual.
• Taiseachd: Na cuir an aonad fosgailte do uisge no taiseachd. Na cuir nithean làn lionntan, leithid vasaichean, air an aonad.
• Fionnarachadh: Dèan cinnteach gu bheil fionnarachadh iomchaidh ann. Na cuir bacadh air fosglaidhean fionnarachaidh.
• Teas: Na cuir an aonad faisg air stòran teas leithid rèididheatoran, clàran teas, stòbhaichean, no innealan eile (a’ gabhail a-steach ampliifiers) a bheir teas.
• Glanadh: Glan le clò tioram a-mhàin. Dì-cheangail an cumhachd mus glan thu e.
• Seirbheis: Na feuch ri seirbheis a thoirt don aonad seo thu fhèin. Thoir aire do luchd-obrach seirbheis teisteanasach airson a h-uile seirbheis.
• Càbaill: Dìon an sreang cumhachd bho bhith air a choiseachd air no air a phronnadh, gu sònraichte aig plugaichean, gabhadan goireasachd, agus an àite far am fàg iad bhon inneal.

3. Feartan

The Rolls RM169 Professional Bluetooth Audio Mixer offers a range of features designed for versatile audio mixing:

• 6-channel Analog Audio Mixer
• Integrated Bluetooth Connectivity
• Dedicated Headphone Output
• Cumhachd phantom airson microfònan condenser
• Individual Level and Tone controls for inputs

4. Smachdan agus Ceanglaichean

4.1 Cruth a’ Phannal Aghaidh

The front panel of the RM169 provides access to all primary controls and input connections.

Figear 1: Aghaidh view of the Rolls RM169 mixer. This image displays the input jacks for MIC ONE and MIC TWO, along with their respective LEVEL and TONE controls. Channels 1 through 4 also have LEVEL controls. The BASS and TREBLE equalization knobs are visible, as well as the HEADPHONE LEVEL and OUTPUT controls. On the right, the BLUETOOTH ID (ROLLSBT) and POWER indicator are shown, along with the RESET button.

• MIC ONE / MIC TWO (XLR/TRS Combo Jacks): Inputs for microphones or line-level sources.
• LEVEL (MIC ONE, MIC TWO, 1-4): Adjusts the input gain for each respective channel.
• TONE (MIC ONE, MIC TWO): Adjusts the tonal characteristics (brightness/darkness) of the microphone inputs.
• BEUS / TRÌBLE: Global equalization controls for the main mix.
• ÌRE Fòn-cluaise: A’ cumail smachd air meud toradh an fhòn-cinn.
• TORAIDHEAN: Master volume control for the main outputs.
• BLUETOOTH ID (ROLLSBT): Displays the Bluetooth pairing name.
• Comharra cumhachd: A’ soilleireachadh nuair a tha cumhachd aig an aonad.
• ATH-SHUIDHICH: Button to reset Bluetooth connection.

4.2 Ceanglaichean pannal cùil

The rear panel houses the power input and main audio output connections.

Figear 2: Cùl view of the Rolls RM169 mixer. This image shows the 15 VDC power input, the MAIN OUTPUTS (LEFT and RIGHT) available via XLR and RCA connectors. SOURCE INPUTS 1 through 4 are shown as RCA jacks. A MIC/FX INSERT jack is present, along with MICROPHONE 1 and 2 XLR inputs and a PHANTOM POWER switch.

• 15 VDC Power Input: Ceangail an adapter cumhachd a-steach an seo.
• MAIN OUTPUTS (XLR & RCA): Balanced XLR and unbalanced RCA outputs for connecting to an ampinneal-labhairt, luchd-labhairt cumhachdach, no inneal clàraidh.
• SOURCE INPUTS (1-4 RCA): Unbalanced RCA inputs for line-level devices such as CD players, media players, or other audio sources.
• MIC/FX INSERT: Allows for the insertion of external effects processors for the microphone channels.
• MICROPHONE 1 / MICROPHONE 2 (XLR): Dedicated XLR inputs for microphones.
• Suidse CUMHACHD PHANTOM: A’ cur cumhachd phantom +48V an gnìomh airson microfònan co-dhlùthachaidh a tha ceangailte ris na cuir-a-steach XLR.

5. Suidhich

Follow these steps to set up your RM169 mixer:

1. Suidheachadh: Place the RM169 on a stable, flat surface or mount it in a standard 19-inch rack using appropriate rack ears (not included). Ensure adequate ventilation around the unit.
2. Ceangal cumhachd: Connect the supplied 15V DC power adapter to the 15 VDC input on the rear panel of the RM169. Plug the adapter into a suitable AC power outlet. Do not power on the unit yet.
3. Ceangal toraidh: Connect the MAIN OUTPUTS (XLR or RCA) on the rear panel of the RM169 to the inputs of your ampinneal-labhairt, luchd-labhairt cumhachdach, no inneal clàraidh.
4. Ceanglaichean a-steach:
   • For microphones, connect them to the MIC ONE/TWO combo jacks on the front or the dedicated XLR inputs on the rear. If using condenser microphones, ensure the PHANTOM POWER switch on the rear is set to ON.
   • For line-level devices (e.g., CD players, media players), connect them to the SOURCE INPUTS (1-4) on the rear panel using RCA cables.
5. Fòn-cluaise: If desired, connect headphones to the HEADPHONE output on the front panel.
6. Cumhachd air: Once all connections are made, turn on the RM169. The POWER indicator on the front panel will illuminate.

6. Stiùireadh Obrachaidh

This section details the basic operation of the RM169 mixer.

1. Adjusting Input Levels: For each connected source (microphones, line-level devices), slowly turn up the corresponding LEVEL knob (MIC ONE, MIC TWO, 1-4) until the desired volume is achieved. Monitor your output device to prevent clipping or distortion.
2. Tone Control (Microphones): Use the TONE knobs for MIC ONE and MIC TWO to adjust the brightness or warmth of the microphone signals. Turn clockwise for brighter sound, counter-clockwise for warmer sound.
3. Global Equalization: Use the BASS and TREBLE knobs to adjust the overall low and high frequencies of the main mix.
4. Prìomh Ìre Toraidh: The OUTPUT knob controls the master volume of the main XLR and RCA outputs. Adjust this to control the overall volume sent to your ampluchd-labhairt no luchd-labhairt cumhachd.
5. Sùil air Fòn-cluaise: Use the HEADPHONE LEVEL knob to adjust the volume of your headphones independently of the main output.

6.1 Pairing Bluetooth

To connect a Bluetooth device to your RM169:

1. Ensure the RM169 is powered on.
2. On your Bluetooth-enabled device (e.g., smartphone, tablet), go to its Bluetooth settings and enable Bluetooth.
3. Lorg airson available devices. The RM169 will appear as "ROLLSBT".
4. Select "ROLLSBT" to pair. Once paired, audio from your device will be routed through the RM169.
5. Adjust the level of the Bluetooth input using the corresponding channel level control (typically Channel 4, but refer to the front panel diagram for exact labeling).
6. If you experience connection issues, press the RESET button on the front panel to clear the Bluetooth connection and attempt pairing again.

7. Cumail suas

Proper maintenance ensures the longevity of your RM169 mixer:

• Glanadh: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or aerosol cleaners.
• Stòradh: Nuair nach eilear ga chleachdadh airson ùine mhòr, stòraich an aonad ann an àite fionnar, tioram, air falbh bho sholas dìreach na grèine agus teòthachd anabarrach.
• Fionnarachadh: Dèan cinnteach gu cunbhalach nach eil duslach no sprùilleach a’ cur bacadh air na fosglaidhean fionnarachaidh.

8. A ’dèanamh trioblaid

If you encounter issues with your RM169, refer to the following common problems and solutions:

• Gun chumhachd:
  • Dèan cinnteach gu bheil an inneal-atharrachaidh cumhachd ceangailte gu tèarainte ris an aonad agus ri socaid cumhachd a tha ag obair.
  • Verify the power outlet is active.
• Gun toradh fuaim:
  • Check that the RM169 is powered on and the POWER indicator is lit.
  • Ensure the OUTPUT level knob is turned up.
  • Verify that the LEVEL knobs for the active input channels are turned up.
  • Thoir sùil air na càbaill claisneachd uile airson ceanglaichean tèarainte agus obrachadh ceart.
  • Dèan cinnteach gu bheil an ceangal amplifier or powered speakers are turned on and functioning correctly.
• Bluetooth gun cheangal:
  • Ensure Bluetooth is enabled on your device and it is within range of the mixer.
  • Press the RESET button on the front panel of the RM169.
  • Forget or unpair "ROLLSBT" from your device's Bluetooth settings and attempt to pair again.
  • Ensure no other device is currently paired with the RM169.
• Fuaim air a shaobhadh:
  • Reduce the input LEVEL for the affected channel.
  • Reduce the master OUTPUT level.
  • Check the input signal source for distortion.

9. Sònrachaidhean

10. Barantas agus Taic

Rolls Corporation warrants its products to the original consumer purchaser to be free from defects in materials and workmanship for a period of one year from the date of purchase. This warranty does not cover damage resulting from accident, misuse, abuse, improper operation, unauthorized modification, or neglect. For warranty service or technical support, please contact your authorized Rolls dealer or visit the official Rolls weblàrach-lìn airson fiosrachadh conaltraidh.

Feuch an glèidh thu an dearbhadh ceannach agad airson tagraidhean barantais.