1. Ro-ràdh
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of the Malcayang Right Hand Drive (RHD) Power Window Switch, part number 93571-4H110. This product is designed as an aftermarket replacement for specific Hyundai vehicle models. Please read this manual thoroughly before proceeding with installation or use.
Cudromach: This switch is specifically for Right Hand Drive vehicles. Verify your vehicle's drive configuration before installation.
2. Fiosrachadh Sàbhailteachd
- Dì-cheangail bataraidh a’ charbaid an-còmhnaidh mus dèan thu obair dealain sam bith gus casg a chur air clisgeadh dealain no milleadh air co-phàirtean.
- Cleachd uidheamachd dìon pearsanta iomchaidh, leithid glainneachan sàbhailteachd agus miotagan.
- Dèan cinnteach gu bheil an carbad air a phàirceadh air uachdar rèidh leis a’ bhreic pàircidh an sàs.
- Mura h-eil thu cinnteach mu cheum sam bith, bruidhinn ri teicneòlaiche chàraichean teisteanasach.
- Cùm clann is peataichean air falbh bhon raon obrach.
3. Toradh thallview
The Malcayang Power Window Switch (OEM Part Number: 93571-4H110, Manufacturer Part Number: E0625) is a replacement component for the master power window control on compatible Hyundai models. It features controls for all windows and a door lock function.
Figear 3.1: Aghaidh view of the Malcayang RHD Power Window Switch. Shows the main window control buttons, including 'AUTO DOWN', and the door lock/unlock button.
Figear 3.2: Ceàrnach view of the power window switch, highlighting the overall form factor and button layout.
Figear 3.3: Cùl view of the power window switch, showing the electrical connector pins. Ensure this matches your vehicle's existing connector.
Co-chòrdalachd:
- Hyundai H1 (2007-2016)
- Hyundai H-1 (2007-2016)
- Hyundai Starex (2007-2016)
- Hyundai i800 (2007-2016)
- Hyundai Grand iMax (2007-2016)
Note: Compatibility information is for reference only. Different parts may be used for the same year/model. Always verify the OE number (93571-4H110) and visually compare the switch with your original part, paying close attention to appearance and terminal/pin configuration, before installation. If uncertain, provide your Vehicle Identification Number (VIN) to a qualified technician for verification.
4. Setup agus Stàladh
This section outlines the general steps for replacing a power window switch. Specific procedures may vary slightly depending on your vehicle's exact configuration. Refer to your vehicle's service manual for detailed instructions.
- Ullaich an carbad: Park the vehicle on a level surface, engage the parking brake, and turn off the ignition. Disconnect the negative terminal of the vehicle's battery to prevent electrical hazards.
- Faigh cothrom air an suidse: The power window switch is typically integrated into the door panel. You may need to carefully pry off a trim piece or remove screws to access the switch assembly. Use appropriate trim removal tools to avoid damaging interior components.
- Dì-cheangail an Seann Suidse: Once the switch assembly is accessible, carefully disconnect the electrical connector(s) by pressing any release tabs. Then, remove the old switch from its housing.
- Stàlaich an suidse ùr: Position the new Malcayang power window switch (93571-4H110) into the door panel housing. Ensure it seats correctly and securely.
- Ceangail dealain: Reconnect the electrical connector(s) to the new switch. Ensure the connection is firm and secure.
- Gnìomhachd deuchainn: Before fully reassembling the door panel, reconnect the vehicle's battery. Turn the ignition to the 'ON' position (do not start the engine) and test all window functions (up/down for all windows) and the door lock/unlock function.
- Ath-chruinnich Pannal an Dorais: If the switch functions correctly, reassemble any removed trim pieces and secure any screws. Ensure all components are properly aligned and fastened.
- Sgrùdadh deireannach: Perform a final check of all window and lock functions.
Figear 4.1: Example of a power window switch installed in a Right Hand Drive vehicle's door panel. Note the position relative to the driver.
Figure 4.2: Visual comparison illustrating the difference between Left Hand Drive (LHD) and Right Hand Drive (RHD) master power window switches. This product is RHD.
5. Stiùireadh Obrachaidh
The Malcayang Power Window Switch operates identically to the original equipment manufacturer (OEM) switch it replaces.
- Window Control: To lower a window, press down on the corresponding switch button. To raise a window, pull up on the corresponding switch button.
- Auto Down Function: The driver's side window switch features an "AUTO DOWN" function. A single, firm press down on this button will fully lower the driver's window without needing to hold the button. To stop the window mid-descent, briefly press the button again.
- Door Lock/Unlock: The dedicated lock button (often marked with a padlock icon) controls the central locking system for the vehicle's doors. Press to lock, press again to unlock (functionality may vary slightly based on vehicle model).
- Window Lock: If present, the window lock button (often marked with a window icon and a lock symbol) disables the passenger window controls, allowing only the driver to operate them.
6. Cumail suas
The power window switch is a sealed unit and generally requires no routine maintenance. However, to ensure longevity and proper function:
- Cùm an suidse glan agus saor bho dhuslach, salachar, agus dòrtadh leaghaidh. Cleachd clò bog, tioram airson a ghlanadh.
- Avoid excessive force when operating the buttons.
- If any liquids are spilled on the switch, disconnect the battery immediately and allow the switch to dry completely before reconnecting power.
7. A ’dèanamh trioblaid
If you experience issues with your power window switch, consider the following troubleshooting steps:
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Window does not move | Blown fuse, faulty window motor, wiring issue, window lock engaged. | Check vehicle's fuse box for a blown fuse and replace if necessary. Ensure window lock is disengaged. If problem persists, consult a technician for motor or wiring diagnosis. |
| Window moves slowly or intermittently | Weak motor, dirty window tracks, wiring issue. | Clean and lubricate window tracks. Check for loose wiring connections. If problem persists, motor may need replacement. |
| Door locks do not respond | Blown fuse, faulty central locking module, wiring issue. | Check vehicle's fuse box. Consult a technician for further diagnosis. |
| Only driver's window works | Window lock button engaged. | Disengage the window lock button on the master switch. |
If these steps do not resolve the issue, it is recommended to seek assistance from a certified automotive technician.
8. Sònrachaidhean
| Feart | Mion-fhiosrachadh |
|---|---|
| Brand | Malcayang |
| Àireamh Pàirt OEM | 93571-4H110 |
| Àireamh Pàirt Dèanadair | E0625 |
| Modh obrachaidh | Cumhachd |
| Seòrsa conaltraidh | Mar as trice fosgailte |
| Seòrsa ceangail | Ceangal luath |
| Seòrsa cuairteachaidh | 2-slighe |
| Stuth conaltraidh | Stàilinn nach meirg |
| Ìre Dìon Eadar-nàiseanta | IP00 |
| Àireamh de dhreuchdan | 1 |
| Modh smachd | Suathadh |
| Dath | Dubh |
| Meudan nì (L x W x H) | 2.76 x 2.36 x 4.72 òirleach |
| Cuideam nì | 5.6 unnsa |
9. Barantas agus Taic
This Malcayang Power Window Switch comes with a Barantas 1 bhliadhna bho cheann-latha a’ cheannaich. Tha am barantas seo a’ còmhdach lochdan saothrachaidh fo chleachdadh àbhaisteach.
The warranty does not cover damage resulting from improper installation, misuse, accident, neglect, or unauthorized modification.
For warranty claims or technical support, please contact your retailer or the Malcayang customer service department with your purchase details and the product's OEM part number (93571-4H110) or manufacturer part number (E0625).
For additional information or to explore other Malcayang products, visit the official Malcayang Store.