1. Ro-ràdh
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Alpine S-A60M Mono Car Audio Amplifier. The S-A60M is a Class-D amplifier designed to deliver reliable power for your car audio subwoofer system. For optimal performance and safety, please read this manual thoroughly before installation and use.

Image 1.1: Alpine S-A60M Mono Car Audio Amplifier with optional RUX-KNOB.2 remote bass control knob and wiring accessories.
2. Fiosrachadh Sàbhailteachd
Lean na ceumannan sàbhailteachd a leanas an-còmhnaidh gus casg a chur air dochann no milleadh air an ampneach-sgaoilidh no carbad:
- Dì-cheangail ceann-uidhe àicheil bataraidh a’ charbaid mus tòisich thu air stàladh sam bith.
- Dèan cinnteach gu bheil talamh ceart ri chassis a’ charbaid.
- Cleachd uèirleadh den thomhas iomchaidh airson ceanglaichean cumhachd is talmhainn mar a tha air a shònrachadh san earrann stàlaidh.
- Protect all wiring from sharp edges and pinch points.
- Na cuir suas an ampinneal-losgaidh ann an àiteachan a tha fosgailte do sholas dìreach na grèine, teas ro mhòr, taiseachd no duslach.
- Stàlaich gu sàbhailte an amplifier to prevent it from coming loose during sudden stops or impacts.
- Seachain a bhith ag obrachadh an amplifier at excessively high volume levels for prolonged periods, which can damage hearing or speakers.
- Mura h-eil thu cinnteach mu phàirt sam bith den phròiseas stàlaidh, bruidhinn ri proifeasanta teisteanasach.
3. Setup agus Stàladh
Tha stàladh ceart deatamach airson coileanadh agus fad-beatha do amplifier. Lean na ceumannan seo gu faiceallach.
3.1 Uèir solair cumhachd
Refer to the diagram below for correct power supply connections. Always use the specified wire gauges and ensure all connections are secure.

Image 3.1: Power Supply Wiring Diagram. This diagram illustrates the correct method for connecting the amplifier to the vehicle's power system, including the battery, fuse, and ground connections. Ensure the fuse capacity matches the ampriatanasan an neach-saoraidh.
Cudromach: The total fuse capacity of the amplifier must be installed and the specified wire length. For detailed information, refer to the "Power Supply" section in the owner's manual. Always connect the power wire directly to the positive battery terminal and the ground wire to a clean, unpainted metal surface on the vehicle chassis.
- Battery (BATT): Connect to the positive (+) terminal of the vehicle battery via an appropriate fuse.
- Iomallach (REM): Connect to the remote turn-on output of your head unit.
- Talamh (GND): Connect to a clean, unpainted metal part of the vehicle chassis.
- Speaker Output (SPK OUT): Connect to your subwoofer(s).

Dealbh 3.2: Amplifier Power and Speaker Output Terminals. This image displays the terminals for power input (BATT, REM, GND) and speaker output (SPK OUT) on the Alpine S-A60M amplifier, along with the integrated fuses.
3.2 Ceanglaichean Cuir-a-steach Fuaime
The S-A60M supports both low-level (RCA) and high-level (speaker wire) inputs.
- Cuir-a-steach Ìosal-Ìre (RCA): Ceangail càbaill RCA bho fo-woofer no ro-thoraidhean làn-raoin an aonaid chinn agad ris an amplifier's INPUT (L/R) terminals.
- Cur a-steach àrd-ìre: If your head unit does not have RCA outputs, connect speaker wires from your head unit's speaker outputs directly to the amplifier's high-level input terminals (if available, or use a line output converter).

Dealbh 3.3: Amplifier Input and Control Panel. This image highlights the various input and control settings on the Alpine S-A60M, including the input level switch, gain control, low-pass filter, bass equalizer, and the port for the optional remote bass control.
4. Ag obrachadh an Amplosgadair
Aon uair ‘s gu bheil e air a stàladh, atharraich an amproghainnean lifer airson an coileanadh fuaim as fheàrr.
4.1 Atharrachadh Ìre Cuir-a-steach
- Suidhich an ÌRE INPUT switch to "LO" for low-level (RCA) inputs or "HI" for high-level inputs.
- Atharraich an GAIN control to match the output of your head unit. Start with the gain at minimum, play a familiar track, and slowly increase the gain until distortion is heard, then back off slightly.
4.2 LP Filter (Low-Pass Filter)
The LP Filter allows only frequencies below the set point to pass through to the subwoofer. This is essential for proper subwoofer integration.
- Atharraich an Criathrag LP knob to set the desired crossover frequency (e.g., 80Hz-120Hz is common for subwoofers).
4.3 Co-ionannachd Beus
The Bass EQ provides a boost to specific bass frequencies.
- Atharraich an BAS EQ knob to increase or decrease bass output. Use sparingly to avoid distortion and speaker damage.
4.4 Remote Bass Control (Optional RUX-KNOB.2)
If you have the optional Alpine RUX-KNOB.2 remote bass control, connect it to the REMOTE BASS CONTROL port air an amplifier. This allows for convenient, on-the-fly adjustment of subwoofer output from the driver's seat.
5. Cumail suas
Bidh cumail suas cunbhalach a’ dèanamh cinnteach à fad-beatha agus coileanadh as fheàrr do amplosgadair.
- Glanadh: Glan bho àm gu àm an amptaobh a-muigh an inneal-glanaidh le clò bog, tioram. Seachain ceimigean cruaidh no innealan-glanaidh sgrìobach a chleachdadh.
- Ceanglaichean: Annually check all power, ground, and speaker connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
- Fionnarachadh: Dèan cinnteach gu bheil an ampTha eitean fuarachaidh an lifer saor bho bhacaidhean gus leigeil le sgaoileadh teas ceart.
6. A ’dèanamh trioblaid
Ma tha duilgheadasan agad le do chuid fhèin amplifer, thoir sùil air a’ chlàr a leanas mus iarr thu cuideachadh proifeasanta.
| Comharradh | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Gun chumhachd/Gun fhuaim | Blown fuse, loose power/ground connection, remote wire not connected, amplifier ann am modh dìon. | Check fuses (on amplifier and in power line), verify all power and ground connections, ensure remote wire is connected to head unit's remote output, check for overheating or short circuits. |
| Fuaim air a mhilleadh | Gain set too high, improper input level switch setting, damaged speaker, poor signal source. | Reduce gain, ensure INPUT LEVEL switch matches input type (LO/HI), check speaker wiring and condition, test with a different audio source. |
| No bass output | LP Filter set too high/low, Bass EQ set too low, subwoofer wiring issue. | Adjust LP Filter to appropriate frequency, increase Bass EQ if desired (with caution), verify subwoofer connections and impedance. |
| Ampbidh an lionnadair a’ teasachadh cus | Insufficient ventilation, improper impedance load, gain set too high. | Dèan cinnteach gu bheil sruth-adhair iomchaidh timcheall air an amplùth-chleasaiche, dearbhaich ma tha impedance luchd-labhairt a’ maidseadh amplifier's capabilities, reduce gain setting. |
7. Sònrachaidhean
Detailed technical specifications for the Alpine S-A60M amplosgadair.
- Àireamh Modail: S-A60M
- CTA-2006-B Power Rating:
- 330W RMS x 1 (4ohm, 14.4V, 1% THD+N)
- 600W RMS x 1 (2ohm, 14.4V, 1% THD+N)
- Signal-to-Noise Ratio (S/N): >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm)
- Saobhadh co-sheirmeach iomlan + fuaim (THD + N): 0.03% (ref 1W into 4 ohm)
- Freagairt tricead: 10Hz-400Hz (+/-3 dB)
- DampFactor: >1000
- Voltage: 14.4 bholt (DC)
- Solarachadh as àirde Voltage: 14.4 bholt (DC)
- Solarachadh as ìsle Voltage: 14.4 bholt (DC)
- Seòrsa stàladh: Sliabh uachdar
- Meud pacaid: 10.2 x 9.7 x 3.8 òirleach
- Cuideam: 6.8 Punnd
- Remote Bass Knob Compatible: Yes (requires RUX-KNOB.2, sold separately)
8. Barantas agus Taic
Alpine products are designed and manufactured to the highest quality standards. For specific warranty information regarding your S-A60M amplifier, please refer to the warranty card included with your product or visit the official Alpine weblàrach.
For technical support, service inquiries, or to locate an authorized Alpine dealer, please visit the official Alpine weblàrach-lìn no cuir fios chun roinn seirbheis teachdaiche aca. Cùm do chuidhteas ceannach mar dhearbhadh ceannach airson tagraidhean barantais.
Eachdraidh prìsean stoc Alpine Electronics of America, Inc.
www.alpine-usa.com