1. Ro-ràdh
Thank you for choosing the TOOWELL Motion Sensor Ceiling Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new light fixture. Please read this manual thoroughly before use to ensure safe and efficient operation. Keep this manual for future reference.
2. Toradh thallview
Prìomh fheartan
- Upgrade Daylight/Night Mode: Slide the switch to turn photocell sensor on/off. Under Daylight mode, motion motivated light on all day long. Under Daylight/Night mode, the light only activates at night and turns off automatically after 20 seconds.
- Motion Sensored: Built-in PIR infrared motion detector with 120-degree detection angle. Instantly turns on when it detects motion from up to 20 feet away.
- Gile: Super bright 400 Lumens with 80 pcs bright & long life-span SMD2835 LEDs. Provides wide coverage (300 sqft) with a frosted lamp cover to soften light.
- Energy Efficient Battery Powered: Requires 4 D-cell batteries (not included). Designed for efficiency, providing more than 6 months of light on one set of batteries.
- Gun uèir & furasta a stàladh: No electricity required, quick installation in less than 5 minutes. Ideal for lighting up closets, pantries, stairways, sheds, porches, and storage rooms.
Dè th' anns a' Bhocsa
- 1 x Battery powered ceiling light
- Mounting hardware (screws, anchors, fixing plug)
- CHAN EIL bataraidhean air an toirt a-steach.
Dealbhan toraidh
3. Setup agus Stàladh
The TOOWELL Motion Sensor Ceiling Light is designed for quick and easy installation without the need for electrical wiring. Follow these steps:
- Prepare the Light: Gently twist the back plate of the light counter-clockwise to detach it from the main light unit.
- Stàlaich bataraidhean: Insert 4 D-cell batteries (not included) into the battery compartment, ensuring correct polarity.
- Reattach Back Plate: Align the back plate with the light unit and twist clockwise to secure it.
- Cuir a’ Phlàta Bonn air dòigh: Choose a desired location on the ceiling or wall. Use the included screws and anchors to securely mount the base plate.
- Ceangail an Aonad Solais: Align the light unit with the mounted base plate and twist clockwise until it clicks into place.
- Thoir air falbh film dìon: Kindly note that a blue protective film is stuck on the silver part of the light to keep it clean. You can tear this film off before use for optimal appearance.
4. Stiùireadh Obrachaidh
Your TOOWELL Motion Sensor Ceiling Light offers two operating modes:
- Modh solas an latha: Slide the switch on the light to the 'Daylight' (sun icon) position. In this mode, the motion sensor will activate the light whenever motion is detected, regardless of ambient light conditions (day or night). The light will turn off automatically after 20 seconds of no motion.
- Daylight/Night Mode: Slide the switch on the light to the 'Daylight/Night' (moon icon) position. In this mode, the motion sensor will only activate the light when motion is detected in low-light or dark conditions (at night). The light will turn off automatically after 20 seconds of no motion.
The built-in PIR infrared motion detector has a 120-degree detection angle and can detect motion from up to 20 feet away.
5. Cumail suas
- Ath-nuadhachadh bataraidh: When the light begins to dim or fails to activate, it's time to replace the batteries. Follow the steps in the 'Setup and Installation' section to safely replace the 4 D-cell batteries.
- Glanadh: To clean the light fixture, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
- Fad-beatha LED: The integrated LED lights are designed for a long lifespan and do not require replacement.
6. A ’dèanamh trioblaid
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Cha bhith solas a ’tionndadh. | 1. Tha bataraidhean marbh no air an cur a-steach gu ceàrr. 2. Light mode is set incorrectly for ambient light conditions. 3. Cha deach gluasad sam bith a lorg taobh a-staigh an raoin. | 1. Replace batteries and ensure correct polarity. 2. Check the Daylight/Night mode switch. If it's too bright for Night mode, switch to Daylight mode. 3. Ensure motion is within 20 feet and 120-degree detection angle. |
| Bidh an solas a’ fuireach air gu cunbhalach. | 1. Gluasad leantainneach air a lorg. 2. Light mode is set to 'Daylight' in a constantly bright area. | 1. Dèan cinnteach nach eil gluasad leantainneach taobh a-staigh raon an sensor. 2. If in a bright area, switch to 'Daylight/Night' mode so it only activates in darkness. |
| Tha solas aotrom. | Tha bataraidhean ìosal. | Cuir na 4 bataraidhean D-cealla nan àite. |
| Motion sensor is not responsive. | 1. Sensor is obstructed or dirty. 2. Àirde stàlaidh ceàrr. | 1. Clean the sensor lens with a soft cloth. Ensure no objects are blocking the sensor. 2. Ensure installation height is within recommended range (3-5m / 9.8-16.4ft). |
7. Sònrachaidhean
| Sònrachadh | Luach |
|---|---|
| Brand | TOOWELL |
| Modail | Update Daylight Motion Sensor Light |
| Seòrsa Stòr Solais | LED (SMD2835) |
| Gile | 400 Lumen |
| Teòthachd dath | 5000 Kelvin |
| Stòr cumhachd | 4 D-cell Batteries (Not Included) |
| Ceàrn mothachaidh gluasad | 120 ceum |
| Raon Dearbhaidh Gluasad | Suas gu 20 troigh |
| Uainear fèin-ghluasadach | 20 diogan (às dèidh gun ghluasad) |
| Meudan toraidh | 7.5"D x 1.8"H (7.5"L x 7.5"W x 1.8"H) |
| Cuideam nì | 14.4 unnsa |
| Stuth | Styrene acrylonitrile butadiene (ABS) |
| Seòrsa stàlaidh | Mount Flush |
| Cleachdadh a-staigh / a-muigh | Cleachdadh a-staigh a-mhàin |
8. Barantas agus Taic
Fiosrachadh Barantais
Specific warranty details for the TOOWELL Motion Sensor Ceiling Light are not provided in this manual. For information regarding product warranty, please refer to the product packaging or contact the manufacturer directly.
Taic Luchd-cleachdaidh
If you encounter any issues or have questions not covered in this manual, please contact TOOWELL customer support. You can typically find contact information on the product packaging, the seller's page on the retail platform, or the official TOOWELL weblàrach.
When contacting support, please have your product model number (Update Daylight Motion Sensor Light) and purchase details (e.g., order number, date of purchase) ready to assist with faster service.