APIELE 10 Amp Leabhar-làimhe Cleachdaiche Putan-putan Glasaidh 19mm

Ro-ràdh

This user manual provides detailed instructions for the installation, operation, and maintenance of the APIELE 10 Amp 19mm Latching Push Button Switch. This high-quality metal switch is designed for various applications, including automotive, motorcycle modification, and control equipment.

Fiosrachadh Sàbhailteachd

• Dèan cinnteach gu bheil an cumhachd air a dhì-cheangal mus tèid a stàladh no a chumail suas gus casg a chur air clisgeadh dealain.
• Dearbhaich voltage and current ratings match your application to avoid damage to the switch or connected devices.
• Do not exceed the specified 10 Amp current rating or 12V operating voltage.
• Handle with care to avoid damaging internal components.
• Mura h-eil thu cinnteach mu cheumannan stàlaidh sam bith, bruidhinn ri dealanach teisteanasach.

Bathar seachadview

The APIELE 10 Amp 19mm Latching Push Button Switch features a durable metal construction and an integrated LED ring. It is designed for reliable performance in various environments.

Prìomh fheartan:

• Latching Operation: Push once for ON, push again for OFF.
• Ìre àrd an-dràsta: 10 Amps.
• Soillseachadh LED: 12V LED ring for status indication.
• Togail seasmhach: High-quality metal material.
• IP65 uisge-dhìonach: Suitable for wet or dusty environments.
• Fad-beatha fada: Electrical life of 200,000 times, mechanical life of 1,000,000 cycles.

Co-phàirtean:

The product includes the push button switch and a connector for wiring.

• 1 x Latching Push Button Switch
• 1 x Connector with pre-attached wires

Figure 1: APIELE 10 Amp 19mm Latching Push Button Switch (Red LED, Silver Stainless Steel).

Figure 2: Various angles of the APIELE push button switch, showcasing an dealbhadh làidir aige.

Figure 3: Comparison highlighting the larger press part and stronger contact terminals of the new design (right) compared to the old design (left).

Figure 4: Illustration of the switch's durability, rated for 200,000 press times and 40,000 hours of lamp beatha.

Figure 5: Visual representation of the IP65 waterproof protection, indicating suitability for wet or dusty environments.

Sònrachaidhean

Figure 6: Detailed technical specifications and dimensions of the switch.

Stàladh agus stàladh

Follow these steps for proper installation of your APIELE Latching Push Button Switch.

Diagram uèiridh:

The switch comes with a pre-wired connector for ease of installation. Refer to the diagram below for pin assignments:

• Red Wire: Positive LED Pin "+"
• Uèir Dhubh: Negative LED Pin "-"
• Uèir ghorm: Normal Open Pin

Figure 7: Wiring diagram showing the function of each colored wire on the connector.

Ceumannan stàlaidh:

1. Ullaich Toll-sreap: Drill a 19mm (3/4 inch) diameter hole in the desired mounting surface.
2. Insert Switch: Insert the switch body into the prepared hole from the front.
3. Tèarainte le cnò: Thread the securing nut onto the switch body from the back and tighten it to hold the switch firmly in place.
4. Ceangal Wiring: Attach the provided connector to the switch terminals. Ensure correct polarity for the LED function.

Figure 8: Visual guide for the installation process of the push button switch.

Stiùireadh Obrachaidh

The APIELE Latching Push Button Switch operates with a simple ON-OFF mechanism.

• To turn on the connected device, press the button once. The LED ring will illuminate, indicating the switch is in the ON state.
• To turn off the connected device, press the button again. The LED ring will turn off, indicating the switch is in the OFF state.

Iarrtasan:

This versatile switch is suitable for a wide range of applications, including but not limited to:

• Automobile and motorcycle modifications
• Control equipment switch modifications
• Doorbell buttons
• SOS buttons
• Elevator buttons
• Innealan taighe

Figear 9: Examples of common applications for the APIELE push button switch, including doorbell, car, and elevator buttons.

Cumail suas

The APIELE Latching Push Button Switch is designed for minimal maintenance due to its durable construction and IP65 waterproof rating.

• Glanadh: Wipe the switch surface with a soft, damp clò. Seachain innealan-glanaidh sgrìobach no fuasglaidhean a chleachdadh a dh’ fhaodadh milleadh a dhèanamh air a’ chrìochnachadh no air na pàirtean a-staigh.
• Sgrùdadh: Thoir sùil bho àm gu àm air na ceanglaichean uèiridh gus dèanamh cinnteach gu bheil iad tèarainte agus saor bho chreimeadh.
• Dìon Àrainneachdail: While waterproof, prolonged submersion is not recommended. Ensure the mounting area is properly sealed if exposed to extreme moisture.

Fuasgladh thrioblaidean

Barantas agus Taic

APIELE products are manufactured to high standards. For any issues or support inquiries, please contact APIELE Electric directly through their official channels or the retailer from whom the product was purchased.

Tadhail air an APIELE Store on Amazon airson tuilleadh fiosrachaidh agus roghainnean conaltraidh.