Leabhar-làimhe Cleachdaiche airson Bleith-cheàrnach Flex LBE 17-11 125

1. Toradh thallview

The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.

• Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
• Mechanical Brake: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
• Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
• Motor motair àrd-chomasach: Designed for high load capacity and efficiency, delivering strong power output.
• Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
• Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
• Dealbhadh ergonomic: Compact and ergonomic form for comfortable handling.
• Tool-Free Guard Adjustment: The protective guard can be adjusted without the need for additional tools.
• SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.

2. Stiùireadh Sàbhailteachd

Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.

Sàbhailteachd Coitcheann

• Cuir ort uidheamachd dìon pearsanta (PPE) iomchaidh an-còmhnaidh, a’ gabhail a-steach speuclairean sàbhailteachd, dìon èisteachd, miotagan agus masg duslach.
• Dèan cinnteach gu bheil am pìos obrach gu tèarainte clampair a dhèanamh ron obair-lannsa.
• Keep hands clear of rotating parts and the cutting/grinding area.
• Na obraich an inneal ann an àileachdan spreadhaidh, leithid làthaireachd lioftaichean lasanta, gasaichean no duslach.
• Cùm clann agus luchd-amhairc air falbh fhad ‘s a bhios tu ag obair inneal cumhachd.

Sàbhailteachd dealain

• Dèan cinnteach gu bheil an solar cumhachd voltage matches the rating on the tool's nameplate.
• Na dèan ana-cleachdadh air a’ chorda. Na cleachd an sreang gu bràth airson an inneal cumhachd a ghiùlan, a tharraing no a thoirt air falbh. Cùm corda air falbh bho theas, ola, oirean biorach, no pàirtean gluasadach.
• Ma tha inneal cumhachd ag obair ann an adamp àite do-sheachanta, cleachd solar dìon inneal sruth iarmharach (RCD).

Specific Angle Grinder Safety

• Always use the protective guard. Ensure it is correctly positioned and securely fastened.
• Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
• Never use cutting discs for side grinding.
• Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
• Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.

3. Pàirtean agus Feartan

Prìomh cho-phàirtean:

1. Prìomh Bhuidheann: Houses the motor, electronics, and gearbox.
2. Geàrd-dìon: Adjustable, tool-free guard for user protection.
3. SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
4. Putan Glasaidh Fearsaid: For easy disc changes.
5. Tionndadh sleamhnag: Lockable for continuous operation.
6. Speed Selection Dial: For variable speed control (see Figure 2).
7. Feansaichean adhair: For motor cooling and dust expulsion.

4. Suidhich

Attaching the SoftVib Handle

The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.

Mounting the Protective Guard

The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.

Installing the Grinding/Cutting Disc

1. Unplug the tool from the power supply.
2. Brùth agus gleidh am putan glasaidh fearsaid.
3. Cuir an clò a-staighampa’ bualadh air an fhearsaid.
4. Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
5. Sgriubha air a' chlamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
6. Sgaoil am putan glasaidh fearsaid.

5. Stiùireadh Obrachaidh

Cumhachd air / dheth

• To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
• To switch off, release the slide switch. If locked, press the rear part of the switch to release it.

Smachd astar caochlaideach

The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.

Using the Mechanical Brake

The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.

Working with the Grinder

• Cum an inneal-bleith gu daingeann leis an dà làmh an-còmhnaidh.
• Allow the tool to reach full operating speed before contacting the workpiece.
• Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
• For cutting, use a slight rocking motion to prevent the disc from binding.
• Be mindful of sparks and debris. Direct them away from yourself and others.

6. Cumail suas

Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.

Glanadh

• Thoir a-mach an inneal an-còmhnaidh mus glanadh thu.
• Glan na sliotan fionnarachaidh gu cunbhalach gus casg a chur air duslach a’ cruinneachadh, a dh’ fhaodadh cus teasachadh adhbhrachadh. Cleachd èadhar teannaichte ma tha e ri fhaighinn.
• Sguab taobh a-muigh an inneil le sanasamp aodach. Na cleachd ceimigean cruaidh no innealan-glanaidh sgudail.

Brusaichean gualain

The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.

Stòradh

Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.

7. A ’dèanamh trioblaid

8. Sònrachaidhean

9. Barantas agus Taic

Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.

Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex weblàrach-lìn no air pacaigeadh an toraidh agad.