Hicon Ice Maker with LED Display and 2-in-1 Water Dispenser

Ro-ràdh

Thank you for choosing the Hicon Ice Maker with 2-in-1 Water Dispenser. This appliance is designed to provide convenient access to ice and cold water. Please read this manual thoroughly before operating the unit to ensure safe and efficient use. Keep this manual for future reference.

Stiùireadh sàbhailteachd

• Dèan cinnteach gu bheil an inneal air a chur air uachdar seasmhach, rèidh air falbh bho sholas dìreach na grèine agus bho thùsan teas.
• Na cuir an inneal, an càball cumhachd, no am pluga ann an uisge no leaghan eile.
• Cùm clann air falbh bhon inneal rè obrachadh.
• Cleachd dìreach uisge òil anns an inneal-deighe.
• Thoir a-mach am pluga bhon inneal mus glan thu e no nuair nach eilear ga chleachdadh airson ùine mhòr.
• Do not operate the appliance with a damaged cord or plug. Contact qualified service personnel for repairs.
• Dèan cinnteach gu bheil fionnarachadh ceart ann timcheall an aonaid. Cùm co-dhiù 10cm de dh'àite timcheall air na taobhan agus air a' chùl.

Bathar seachadview

Familiarize yourself with the components of your Hicon Ice Maker.

Figear 1: Cruth a’ Phannal Smachd
This image displays the control panel with buttons for power, ice size selection (Small, Medium, Large), and water dispensing. Indicator lights show when the ice basket is full, water is needed, or the unit is powered on.

Figure 2: Bullet-Shaped Ice Production
The ice maker produces popular bullet-shaped ice cubes, shown here with a water bottle installed on top for automatic water supply.

Suidhich

Dì-phapadh agus suidheachadh

1. Remove all packaging materials and inspect the unit for any damage.
2. Place the ice maker on a firm, level surface. Ensure there is adequate ventilation around the unit (at least 10 cm clearance on all sides).
3. Allow the unit to stand upright for at least 2-4 hours before plugging it in, especially if it was transported horizontally. This allows the refrigerant to settle.

A 'cur uisge ris

The Hicon Ice Maker offers two methods for water supply:

Figure 3: Water Filling Methods
The left side shows automatic water addition using a 5-gallon bottle. The right side shows manual water addition by pouring water into the reservoir.

1. Automatic Water Supply (using a water bottle): Place a standard 2, 3, or 5-gallon water bottle onto the top dispenser opening. Ensure the bottle is securely seated.
2. Solarachadh uisge làimhe: Open the top lid and pour potable water directly into the water reservoir until it reaches the maximum fill line. Do not overfill.

Thoir an aire: The melted ice water is recycled back into the reservoir for subsequent ice production cycles.

Stiùireadh Obrachaidh

1. Cumhachd air: Plug the appliance into a grounded electrical outlet. Press the AIR/DHETH button on the control panel to start the unit.
2. Tagh Meud Deighe: Brùth an ICE CUBE SIZE SELECTION button repeatedly to cycle through the available ice sizes: Small (S), Medium (M), and Large (L). The corresponding indicator light will illuminate.
3. Riochdachadh deigh: The unit will begin the ice-making cycle. The first batch of ice may take 6-10 minutes. Subsequent batches will be produced continuously.
4. Comharra Làn Deigh: Nuair a bhios am basgaid deighe làn, ICE LÀN indicator light will illuminate, and the machine will pause ice production. Remove ice to resume operation.
5. Cladach uisgetage Comharra: Ma tha an stòras uisge ìosal, SHOR UISGETAGE indicator light will illuminate. Add more water using either the automatic or manual method.
6. Dispense Cold Water: To dispense cold water, place a glass under the cold water tap and press the UISGE button. The water nozzle can be extended and retracted.
7. Cumhachd dheth: Brùth an AIR/DHETH putan gus an inneal a chuir dheth.

Thoir an aire: The ice produced can remain in the basket for approximately 1-2 hours if the machine is turned off, but it is not a freezer and ice will eventually melt.

Cumail suas

Glanadh

1. Mus tèid a ghlanadh: Always unplug the ice maker from the power outlet.
2. Glanadh a-staigh: Remove the ice basket. Clean the interior of the water reservoir and ice-making components with a soft cloth dampair a nighe le fuasgladh tlàth de inneal-glanaidh. Sruthlaich gu mionaideach le uisge glan.
3. Glanadh a-muigh: Sguab an uachdar a-muigh le clò bog, damp aodach. Na cleachd luchd-glanaidh sgudail no solventan.
4. Drèanadh: Periodically drain any remaining water from the reservoir using the drain plug located at the bottom or back of the unit (refer to specific model for exact location).
5. Moladh airson a’ chiad chleachdadh: For best taste, clean the unit thoroughly before its first use.

Stòradh

Mura tèid an inneal-deighe a chleachdadh airson ùine mhòr, dòirt an t-uisge gu lèir a-mach, glan an aonad, agus leig leis tiormachadh gu tur mus cuir thu ann an àite fionnar, tioram e.

Fuasgladh thrioblaidean

Sònrachaidhean

• Brand: Hicon
• Modail: B07S3JLSKY
• Meudan an toraidh (D x L x À): 35.7 cm x 42.3 cm x 45.2 cm
• Comas cinneasachaidh deigh: Suas ri 25 kg gach 24 uair a thìde
• Comas stòraidh deigh: 1.2 kg
• Dètage: 160 watt
• Voltage: 220 Volt
• fuarachail: R600a
• Seòrsa stuth: Plastaig
• UPC: 195893458158

Figear 4: Meudan an toraidh
This diagram illustrates the physical dimensions of the ice maker for placement and installation planning.

Barantas agus Taic

The Hicon Ice Maker comes with a barantas aon-bhliadhna bho cheann-latha a’ cheannaich. Tha am barantas seo a’ còmhdach lochdan saothrachaidh fo chumhachan cleachdaidh àbhaisteach.

For warranty claims, technical support, or any questions regarding your product, please contact Hicon customer service. Please have your model number (B07S3JLSKY) and proof of purchase ready when contacting support.

Hicon has over 10 years of experience in developing ice machines, ensuring advanced ice-making technology and excellent quality.