Ro-ràdh
This manual provides detailed instructions for the setup, operation, and maintenance of your Samson PXD1 Wireless Lavalier Microphone Transmitter. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize its performance. The PXD1 is designed to capture audio wirelessly and transmit it to your Mac or Windows computer via a compatible USB receiver (sold separately).
Susbaint pacaid
Dearbhaich gu bheil na nithean gu lèir a tha air an liostadh gu h-ìosal an làthair sa phacaid agad:
- Samson PXD1 Wireless Lavalier Microphone Transmitter
- Micreofon Lavalier
- Càball cosgais USB
- Leabhar-làimhe cleachdaiche (an sgrìobhainn seo)
Bathar seachadview
The Samson PXD1 is a compact and lightweight beltpack transmitter designed for wireless audio capture. It operates on the 2.4 GHz frequency band, providing reliable digital audio transmission.

Figure 1: Samson PXD1 Wireless Lavalier Microphone Transmitter. This image shows the compact design of the PXD1 transmitter unit.
Prìomh cho-phàirtean:
- Putan Cumhachd: Used to turn the unit on and off.
- Inbhe LED: Indicates power, battery status, and pairing status.
- Cuir a-steach microfòn: Seacaid 3.5mm airson ceangal a dhèanamh ris a’ mhaicreafòn lavalier.
- Port USB: Airson a’ bhataraidh a-staigh a ghearradh.
- Clip crios: For attaching the transmitter to clothing or a belt.
Suidhich
- Charge the Transmitter: Connect the PXD1 transmitter to a USB power source using the provided USB cable. The Status LED will indicate charging status. Ensure the unit is fully charged before first use.
- Connect the Lavalier Microphone: Plug the lavalier microphone's 3.5mm connector into the Microphone Input jack on the PXD1 transmitter. Secure the microphone to your clothing, approximately 6-8 inches from your mouth, for optimal sound capture.
- Pair with USB Receiver: The PXD1 requires a compatible Samson USB receiver (sold separately) to function.
- Turn on the PXD1 transmitter by pressing and holding the Power Button until the Status LED illuminates.
- Plug the Samson USB receiver into an available USB port on your Mac or Windows computer.
- Follow the pairing instructions provided with your specific Samson USB receiver. Typically, this involves pressing a pairing button on both the transmitter and receiver until a solid connection is indicated by their respective status LEDs.
- Ceangail ris a’ choimpiutair: Once paired, your computer should recognize the USB receiver as an audio input device. Select it as your input device in your operating system's sound settings and your preferred digital audio software.
Stiùireadh Obrachaidh
- Cumhachd air / dheth: Press and hold the Power Button for approximately 2 seconds to turn the PXD1 on or off. The Status LED will light up when powered on.
- Monitor Audio Levels: Before recording or live streaming, perform a sound check. Speak into the lavalier microphone at your normal speaking volume and monitor the input levels in your digital audio software. Adjust the input gain on your computer or software as needed to prevent clipping (distortion) and ensure a strong signal.
- Suidheachadh: Ensure the lavalier microphone is positioned correctly to capture clear audio. Avoid placing it where it might rub against clothing, which can cause unwanted noise.
- Raon: Maintain a clear line of sight between the PXD1 transmitter and the USB receiver for optimal wireless performance. Obstacles can reduce the effective range.
- Beatha bataraidh: The Status LED will change color or flash to indicate low battery. Recharge the unit promptly when this occurs.
Cumail suas
- Glanadh: Use a soft, dry cloth to clean the exterior of the PXD1 transmitter. Do not use liquid cleaners or solvents.
- Stòradh: When not in use, store the transmitter in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cùram Bataraidh: For optimal battery longevity, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to approximately 50% every few months.
- Cùram microfòn: Keep the lavalier microphone clean and free from dust or debris.
Fuasgladh thrioblaidean
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Gun toradh fuaim |
|
|
| Poor audio quality / Distortion |
|
|
| Transmitter won't turn on |
|
|
Sònrachaidhean
- Brand:
- SAMHRAIDH
- Ainm a' mhodail:
- PXD1
- Teicneòlas ceangail:
- USB (via compatible receiver)
- Seòrsa ceangail:
- USB (for charging/receiver connection)
- Pàtran Polar:
- Unidirectional (Lavalier Microphone)
- Cuideam nì:
- 2.4 unnsa
- Meudan nì (L x W x H):
- 3.6 x 2.2 x 0.9 òirleach
- Stòr cumhachd:
- Electric Corded (USB Powered)
- Cleachdaidhean a thathar a’ moladh:
- Podcasting, Voice Recording
- Innealan co-fhreagarrach:
- Personal Computer (Mac/Windows)
- Àireamh Pàirt Dèanadair:
- SWXPD1BP
- UPC:
- 809164218579
Barantas agus Taic
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Samson weblàrach. Cùm dearbhadh ceannach airson tagraidhean barantais.
Samson Official Weblàrach: www.samsontech.com