Onset HOBO H21-USB Micro Station Data Logger User Manual

1. Ro-ràdh

The Onset HOBO H21-USB Micro Station is a compact, weatherproof data logger designed for multi-channel monitoring of environmental conditions. This battery-powered station supports up to five plug-and-play Smart Sensors, making it suitable for a wide range of indoor and outdoor applications. Its robust design and built-in USB interface ensure efficient data collection and offload.

Prìomh fheartan:

Compact size for easy deployment in various environments.
Five smart sensor inputs for versatile data collection.
Wide range of compatible plug-and-play smart sensors.
Integrated USB interface for direct data offload to PC or Mac.
Weatherproof IP66 enclosure for harsh outdoor conditions.
Hinged door and integrated mounting tabs for simple installation.

Figure 1: Onset HOBO H21-USB Micro Station Data Logger. This image shows the compact, grey data logger unit with its hinged door closed, highlighting its robust design.

2. Pasgan-susbaint

Dèan cinnteach gu bheil a h-uile rud anns a’ phacaid mus lean thu air adhart leis an stàladh:

HOBO H21-USB Micro Station Data Logger
Càball USB
Leabhar-làimhe cleachdaiche (an sgrìobhainn seo)
(Note: Smart Sensors are sold separately and are not included with the base unit.)

3. Suidhich

3.1. Stàladh bathar-bog

Before deploying the HOBO H21-USB, install the necessary HOBOware software on your computer. HOBOware is required for configuring the logger, launching deployments, and offloading data.

Download the latest version of HOBOware from the official Onset weblàrach: www.onsetcomp.com/support/software
Follow the on-screen instructions to complete the installation for your Windows PC or Mac operating system.
Connect the HOBO H21-USB to your computer using the provided USB cable. The software should recognize the device automatically.

3.2. Physical Installation and Sensor Connection

The H21-USB Micro Station is designed for easy deployment. Ensure the installation location is suitable for the sensors being used and provides adequate protection from extreme conditions beyond the logger's specifications.

Open the hinged door of the Micro Station.
Connect up to five compatible Smart Sensors into the available ports. Ensure each sensor is securely plugged in.
Close the hinged door firmly to maintain the weatherproof seal.
Use the integrated mounting tabs to secure the logger to a pole, post, or flat surface using screws or zip ties (not included). Ensure the logger is mounted in a way that does not obstruct sensor readings or expose it to unnecessary physical stress.

4. Stiùireadh Obrachaidh

4.1. Configuring and Launching a Deployment

Use HOBOware software to configure the logging parameters and start a new data collection session.

Connect the HOBO H21-USB to your computer via USB.
Open HOBOware software.
From the HOBOware menu, select Device > Launch.
Configure the desired logging parameters, including:
- Ùine Logaidh: How frequently data is recorded (e.g., every 5 minutes).
- Ùine tòiseachaidh: Immediate, at a specific date/time, or on button push.
- Ùine stad: When memory is full, at a specific date/time, or never (manual stop).
- Configuration Sensor: Enable/disable connected sensors and set specific sensor parameters if applicable.
Cliog Tòisich to launch the deployment. The logger will begin recording data according to your settings.

4.2. Data Offload and Analysis

Once a deployment is complete or you wish to retrieve data, follow these steps:

Connect the HOBO H21-USB to your computer via USB.
Open HOBOware software.
From the HOBOware menu, select Device > Readout.
The software will offload the recorded data from the logger.
Sàbhail an dàta file to your computer. HOBOware allows you to view, plot, and export the data in various formats (e.g., CSV, Excel) for further analysis.

5. Cumail suas

5.1. Ath-nuadhachadh bataraidh

The HOBO H21-USB is powered by user-replaceable batteries. Refer to the specifications for the correct battery type. Replace batteries when the low battery indicator appears in HOBOware or if the logger fails to power on.

Ensure the logger is not actively logging data. If it is, stop the deployment and offload any critical data.
Open the hinged door and locate the battery compartment.
Carefully remove the old batteries and dispose of them according to local regulations.
Cuir a-steach bataraidhean ùra, a’ dèanamh cinnteach à polarity ceart.
Close the battery compartment and the hinged door securely.

5.2. Glanadh agus stòradh

Regular cleaning and proper storage ensure the longevity and accuracy of your data logger.

Wipe the exterior of the logger with a damp aodach. Na cleachd luchd-glanaidh sgudail no solventan.
Ensure all ports and seals are free of dirt and debris.
When not in use, store the logger in a cool, dry place away from direct sunlight and extreme temperatures.
Ma bhios tu ga stòradh airson ùine mhòr, thoir air falbh na bataraidhean gus casg a chur air aodion.

6. A ’dèanamh trioblaid

This section addresses common issues you might encounter with your HOBO H21-USB Micro Station.

Trioblaid	Adhbhar a dh’fhaodadh a bhith ann	Fuasgladh
Logger not recognized by HOBOware.	Càball USB gun cheangal ceart. HOBOware software not installed or outdated. Cùisean draibhearan. Logger battery depleted.	Ensure USB cable is securely connected to both logger and computer. Try a different USB port. Verify HOBOware is installed and updated to the latest version. Ath-thòisich an coimpiutair agad. Cuir bataraidhean an àite.
Logger not recording data.	Deployment not launched. Logger memory full. Bataraidh ìosal. Sensor not connected or faulty.	Launch a new deployment in HOBOware. Offload data and clear logger memory. Cuir bataraidhean an àite. Check sensor connections. Test with a known good sensor if available.
Inaccurate sensor readings.	Sensor calibration required. Sensor damaged or obstructed. Bacadh àrainneachdail.	Refer to the specific sensor's manual for calibration procedures. Inspect sensor for physical damage or obstructions. Clean if necessary. Relocate the logger and sensors to an area free from known interference sources.

If you encounter issues not covered here, please refer to the Onset support weblàrach-lìn no cuir fios gu taic theicnigeach.

7. Sònrachaidhean

Feart	Mion-fhiosrachadh
Modail	H21-USB
Brand	Toiseach
Eadar-aghaidh bathar-cruaidh	USB
Innealan co-fhreagarrach	PC (Windows), Mac
Number of Smart Sensor Inputs	5
Gu h-iomlan puirt USB	1
Cuideam nì	2.3 Punnd
Rangachadh cuairteachaidh	IP66 (dìon-aimsir)
Tomhais le taic	4-20mA, Amp Hour, Barometric Pressure, DC Voltage, Kilowatt Hours, Leaf Wetness, Light Intensity, Power Factor, Pulse Input, Rainfall, Relative Humidity, Soil Moisture, Temperature, Volt-Amp Reactive, Volt-Amp Reactive hour, Volt-Amps, Water Flow, Watt Hours, Watts, Wind (Requires compatible Smart Sensors)
Àrainneachd Obrachaidh	A-staigh agus a-muigh
UPC	645759321725
ASIN	B07N92MPXS

8. Barantas agus Taic

8.1. Barantas Bathar

Onset products are typically covered by a limited warranty against defects in materials and workmanship. The specific duration and terms of the warranty may vary. Please refer to the warranty information provided with your purchase documentation or visit the official Onset weblàrach-lìn airson poileasaidhean barantais mionaideach.

This warranty generally covers the repair or replacement of defective units, but does not cover damage caused by misuse, improper installation, unauthorized modification, or natural disasters.

8.2. Taic Teicnigeach

For technical assistance, troubleshooting, or questions regarding your HOBO H21-USB Micro Station, please contact Onset Technical Support.

Taic air-loidhne: Visit the Onset support website for FAQs, knowledge base articles, and software downloads: www.onsetcomp.com/support
Fiosrachadh conaltraidh: Refer to the Onset website for current phone numbers and email addresses for technical support.

When contacting support, please have your product model (H21-USB) and a detailed description of the issue ready.

	Stiùireadh Cleachdaiche HOBOware - Bathar-bog Clàraidh Dàta Onset Stiùireadh coileanta don neach-cleachdaidh airson bathar-bog HOBOware le Onset, a’ mìneachadh mar a chuireas tu dàta air bhog, a leughas tu a-mach, a phlòtaicheas tu agus a nì thu mion-sgrùdadh air dàta bho chlàrairean dàta HOBO agus HOBOnodes gun uèir. A’ còmhdach fheartan HOBOware Pro agus Lite, suidheachadh, innealan mion-sgrùdaidh dàta, agus riaghladh innealan airson sgrùdadh àrainneachdail.
	HOBO MX2300 Series Data Logger: Comprehensive User Manual and Specifications Explore the HOBO MX2300 Series Data Loggers from Onset, designed for reliable temperature and relative humidity monitoring. This manual details setup, operation, specifications, and data management using the HOBOconnect app via Bluetooth Low Energy.
	Stiùireadh Tòiseachaidh Luath airson Clàradair Fo-uisge HOBO MX801 Stiùireadh tòiseachaidh luath airson an HOBO MX801 Submersible Logger, a’ mìneachadh a chòrr is a h-uile càil.view, ceangal mothachaidh, calabrachadh, rèiteachadh, cleachdadh, luchdachadh sìos dàta, agus giullachd.
	HOBO U30 Station No Remote Communication (NRC) User's Guide Comprehensive user's guide for the Onset HOBO U30 Station (NRC), a reconfigurable data logging and monitoring device supporting up to 15 channels. Learn about its features, setup, installation, and maintenance for reliable environmental data collection.
	Leabhar-làimhe Cleachdaiche Clàraiche Dàta Teòthachd Crochte HOBO UA-001-xx Leabhar-làimhe coileanta airson an Onset HOBO Pendant Temperature Data Logger (modalan UA-001-08 agus UA-001-64), a’ mìneachadh mion-chomharrachaidhean, ceangal, suidheachadh, obrachadh, rèiteachadh inneal-rabhaidh, agus ath-chur bataraidh.
	Clàraiche Dàta Luathachaidh HOBO Pendant G - Leabhar-làimhe Cleachdaiche Stiùireadh coileanta airson an HOBO Pendant G Acceleration Data Logger, a’ còmhdach a fheartan, chomharrachaidhean, obrachadh, ceangal, modhan clàraidh, stàladh, dìon, ath-chur bataraidh, agus taic. A’ gabhail a-steach mion-fhiosrachadh mu raointean tomhais, cruinneas, eadar-amaichean clàraidh, rangachadh teòthachd, agus fiosrachadh barantais.

Onset H21-USB