Behringer DI800 V2 Signal Direct Box Instruction Manual

1. Ro-ràdh

The Behringer DI800 V2 is a professional 8-channel direct injection (DI) box designed to connect instruments or other audio sources directly to a mixing console or amplifier. It converts unbalanced, high-impedance signals into balanced, low-impedance signals, suitable for long cable runs without signal degradation. The DI800 V2 offers flexible power options, including mains power or phantom power from a mixing console, and features an ultra-flat frequency response for transparent audio reproduction.

2. Stiùireadh Sàbhailteachd Cudromach

• Leugh na stiùiridhean seo gu mionaideach mus cleachd thu an inneal.
• Cùm an stiùireadh seo airson iomradh san àm ri teachd.
• Thoir an aire don a h-uile rabhadh mun toradh agus san leabhar-làimhe.
• Na cleachd an inneal seo faisg air uisge no taiseachd.
• Glan a-mhàin le clò tioram.
• Na cuir bacadh air fosglaidhean fionnarachaidh sam bith. Stàlaich a rèir stiùiridhean an neach-dèanamh.
• Na cuir a-steach faisg air stòran teas sam bith leithid rèididheatoran, clàran teas, stòbhaichean, no uidheam eile (a 'gabhail a-steach ampliifiers) a bheir teas.
• Na dèan a’ chùis air adhbhar sàbhailteachd a’ phlug seòrsa polarized no stèidhichte. Tha dà lann air pluga polarichte le aon nas fharsainge na an tè eile. Tha dà lann air pluga seòrsa talmhainn agus an treas pìos talmhainn. Tha an lann farsaing no an treas prong air a thoirt seachad airson do shàbhailteachd. Mura h-eil am pluga a chaidh a sholarachadh a’ freagairt air an ionad-reic agad, bruidhinn ri neach-dealain gus an t-ionad a tha air a dhol à bith a chur an àite.
• Dìon an sreang cumhachd bho bhith air a choiseachd air no air a phronnadh, gu sònraichte aig plugaichean, gabhadan goireasachd, agus an àite far am fàg iad bhon inneal.
• Na cleachd ach ceanglachan / goireasan a chaidh a shònrachadh leis an neach-dèanamh.
• Na cuir a-steach an inneal seo aig àm stoirmean dealanach no nuair nach eilear ga chleachdadh airson ùine mhòr.
• Thoir iomradh air a h-uile seirbheis gu luchd-seirbheis le teisteanas. Tha feum air seirbheiseachadh nuair a tha an inneal air a mhilleadh ann an dòigh sam bith, leithid sreang solarachaidh cumhachd no pluga air a mhilleadh, leaghan air a dhòrtadh no nithean air tuiteam a-steach don inneal, tha an inneal air a bhith fosgailte do uisge no taiseachd, chan eil e ag obair gu h-àbhaisteach , no air a chuir sìos.

3. Dì-phapadh agus sgrùdadh tùsail

Upon receiving your Behringer DI800 V2, carefully unpack the unit and inspect it for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately. The package should contain the DI800 V2 unit and a power cable. Ensure all components are present before proceeding with setup.

4. Suidhich

4.1 Pannal aghaidh thairis airview

Figear 1: Front panel of the Behringer DI800 V2. Each of the 8 channels features an input jack, a link output, a -20dB pad switch, and a ground lift switch. LED indicators show signal presence and phantom power status.

• INPUT (1-8): 1/4" TS/TRS input jacks for connecting instruments or line-level sources.
• LINK (1-8): 1/4" TS/TRS output jacks for connecting the input signal to an amplifier or monitor. This output is parallel to the input.
• -20dB PAD (1-8): Attenuates the input signal by 20dB. Use this for high-output sources to prevent clipping.
• GROUND LIFT (1-8): Disconnects the ground connection between the input and output, which can help eliminate hum or ground loops.
• Switch CUMHACHD: Tionndaidh an aonad air no dheth.
• PHANTOM POWER LED: Illuminates when phantom power is detected on an XLR output.
• Comharradh LED: A’ soilleireachadh nuair a tha comharra cuir a-steach an làthair.

4.2 Pannal Cùil Os a chionnview

Figear 2: Rear panel of the Behringer DI800 V2. It features eight balanced XLR outputs and the AC power input.

• BAL OUT (1-8): Balanced XLR outputs for connecting to a mixing console's microphone inputs.
• AC IONAD: Standard IEC power connector for connecting the included power cable.

4.3 Cumhachdachadh an Aonaid

The DI800 V2 can be powered in two ways:

1. Prìomh chumhachd: Connect the supplied AC power cable to the AC INPUT on the rear panel and then to a suitable wall outlet.
2. Cumhachd Taibhse: The unit can also be powered by 48V phantom power supplied from a mixing console via the XLR outputs. If phantom power is present on at least one XLR output, the unit will power on automatically. The PHANTOM POWER LED on the front panel will illuminate.

Thoir an aire: If both mains power and phantom power are connected, the unit will prioritize mains power. It is recommended to use mains power for consistent operation, especially if phantom power sources are unreliable or vary.

4.4 Ceanglaichean

• Connect your instrument (e.g., guitar, bass, keyboard) to an IOMPACHADH jack on the front panel using a 1/4" TS or TRS cable.
• If you need to send the signal to an amplifier or monitor on stage, connect a 1/4" TS or TRS cable from the corresponding LEANNAN jack ri do ampcuir a-steach an neach-saoraidh.
• Ceangail an BAL A-muigh XLR output on the rear panel to a microphone input on your mixing console using a balanced XLR cable.

5. Stiùireadh Obrachaidh

5.1 Sruth Comharran

The DI800 V2 takes an unbalanced, high-impedance signal from your instrument, converts it to a balanced, low-impedance signal, and sends it to your mixing console. The LINK output provides a direct, unprocessed copy of the input signal for local monitoring.

5.2 Using the -20dB Pad

If your instrument or audio source has a very high output level, the input signal to the DI800 V2 might be too strong, leading to distortion. In such cases, engage the -20dB PAD switch for the corresponding channel. This will reduce the input signal level by 20 decibels, preventing clipping and ensuring a clean signal to the mixing console.

5.3 Ground Lift Function

Ground loops can cause an audible hum or buzz in your audio system. The BEATHA AN T-SAOGHAIL switch disconnects the ground connection between the input and output stages of the DI800 V2. If you experience hum, try engaging the GROUND LIFT switch for the affected channel. This often resolves ground loop issues without affecting the audio signal.

5.4 Monitoring Signal Presence

Tha an Comharradh LED for each channel illuminates when an audio signal is detected at the input. This provides a quick visual confirmation that your instrument is connected and sending a signal to the DI box.

6. Cumail suas

• Glanadh: Dì-cheangail an aonad bhon chumhachd mus glan thu e. Cleachd clò bog, tioram gus an taobh a-muigh a sguabadh. Na cleachd innealan-glanaidh leaghaidh no fuasglaidhean.
• Stòradh: Store the DI800 V2 in a cool, dry place away from direct sunlight and extreme temperatures.
• Seirbheis: There are no user-serviceable parts inside the DI800 V2. Refer all servicing to qualified service personnel.

7. A ’dèanamh trioblaid

8. Sònrachaidhean

9. Barantas

For detailed warranty information, please refer to the official Behringer website or contact Music Tribe US support. The warranty typically covers manufacturing defects for a specified period from the date of purchase. Keep your proof of purchase for warranty claims.

Tuairisgeul Barantais: Musictribe. Support.

10. Taic

If you encounter issues not covered in this manual or require further assistance, please visit the official Behringer support website or contact Music Tribe US customer service. You can find contact details and additional resources on their official weblàrach.

Taic air-loidhne: Music Tribe Support