1. Ro-ràdh
Thank you for choosing the Nedis SmartLife Wi-Fi Wall Switch (WIFIWC10WT). This device allows you to control your electric curtains, roller blinds, or awnings conveniently via a physical wall switch, the Nedis SmartLife application, or voice commands. This manual provides essential information for safe installation, operation, and maintenance of your device.

Dealbh 1.1: Aghaidh view of the Nedis SmartLife Wi-Fi Wall Switch. This switch features three touch-sensitive buttons for control and integrates with the SmartLife ecosystem.
2. Setup agus Stàladh
2.1 Ceumannan Sàbhailteachd
- Ensure the main power supply is switched off before installation to prevent electric shock.
- Bu chòir an stàladh a dhèanamh le dealanach teisteanasach no a rèir còdan dealain ionadail.
- Na gabh thairis air a’ chomas luchdaidh as àirde de 300W.
2.2 Diagram uèiridh
Connect the wires to the terminals on the back of the switch as shown in the diagram below. Ensure all connections are secure.

Dealbh 2.1: Cùl view of the wall switch, displaying the connection terminals. 'L' is for Live, 'N' for Neutral, and 'L1', 'L2', 'L3' are for motor control (Up, Down, Stop/Common).
- L: Live wire (Phase)
- N: Uèir neodrach
- L1: Motor Up (e.g., curtain open, blind up, awning out)
- L2: Motor Down (e.g., curtain close, blind down, awning in)
- L3: Common or Stop (refer to your motor's wiring for specific connection)
2.3 Stàladh Aplacaid agus Ceangal Wi-Fi
- Luchdaich sìos an Beatha glic Nedis aplacaid bhon stòr aplacaidean air an fhòn-smart agad (iOS no Android).
- Register or log in to your Nedis SmartLife account.
- Power on the wall switch. The Wi-Fi indicator light should start blinking rapidly. If not, press and hold the middle button for 5-10 seconds until it blinks.
- In the app, tap '+' to add a new device. Select 'Curtain Switch' or similar from the device list.
- Follow the on-screen instructions to connect the switch to your 2.4 GHz Wi-Fi network. Note: This device only supports 2.4 GHz Wi-Fi.
2.4 Calabradh
After successful Wi-Fi connection, calibrate the switch to your curtain/blind/awning motor. This sets the open and closed positions.
- In the Nedis SmartLife app, navigate to the device settings for your wall switch.
- Look for a 'Calibration' or 'Travel Limit Setting' option.
- Follow the app's prompts to fully open and then fully close your curtain/blind/awning. The app will record the travel time for each direction.
- Test the open and close functions to ensure calibration is accurate. Adjust if necessary.
3. Ag obrachadh an inneal
3.1 Smachd làimhe
The wall switch has three touch buttons:
- Putan saighead suas: Opens the curtain/blind/awning.
- Middle Pause Button: A 'cur stad air a' ghluasad.
- Putan saighead sìos: Closes the curtain/blind/awning.
3.2 Smachd App
Use the Nedis SmartLife app for advanced control and scheduling.

Image 3.1: Nedis SmartLife app interface for controlling a sunshade. The app allows for opening, pausing, closing, and setting timers for your connected device.
- Open/Close/Pause: Control the movement directly from the app interface.
- Uaireadair/Clàr-ama: Set specific times for your curtains/blinds/awnings to open or close automatically.
- Seallaidhean: Create custom scenes to automate actions based on conditions like time of day, weather, or other SmartLife devices.
3.3 Smachd Guth
The switch is compatible with Amazon Alexa and Google Assistant. Link your Nedis SmartLife account to your voice assistant app and use commands such as:
- "Alexa, open the living room blinds."
- "Hey Google, close the bedroom curtains."
- "Alexa, stop the awning."
4. Cumail suas
The Nedis SmartLife Wi-Fi Wall Switch requires minimal maintenance.
- Glan an uachdar le clò bog, tioram. Na cleachd innealan-glanaidh sgrìobach no fuasglaidhean.
- Ensure no liquids enter the device.
- Regularly check for any loose wiring connections, especially after initial installation.
5. A ’dèanamh trioblaid
If you encounter issues with your Nedis SmartLife Wi-Fi Wall Switch, refer to the following common solutions:
- Inneal nach eil a’ ceangal ri Wi-Fi:
- Ensure your Wi-Fi network is 2.4 GHz. The switch does not support 5 GHz networks.
- Check if the Wi-Fi indicator light is blinking rapidly. If not, press and hold the middle button for 5-10 seconds to enter pairing mode.
- Verify your Wi-Fi password and network stability.
- Gluais an suidse nas fhaisge air an router Wi-Fi agad rè an t-suidheachaidh.
- Calibration issues (stops at wrong point):
- Repeat the calibration process in the Nedis SmartLife app. Ensure the curtain/blind/awning moves fully to its open and closed positions during calibration.
- Thoir sùil airson cnapan-starra corporra sam bith a chuireas casg air làn ghluasad.
- Ensure your motor has working end-switches if applicable, as the switch relies on these for accurate positioning.
- Inneal gun fhreagairt:
- Check the power supply to the switch.
- Verify your Wi-Fi connection. If the Wi-Fi is down, app control will not work, but manual control should still function.
- Restart the device by turning off the main power for a few seconds and then turning it back on.
- If the issue persists, consider resetting the device to factory settings (refer to app for specific instructions, usually involves holding a button for an extended period) and re-pairing.
- Unexpected behavior (e.g., uncontrolled movement, high-pitched noise):
- Immediately disconnect power to the device.
- This may indicate a hardware fault. Do not attempt to repair it yourself. Contact customer support.
6. Sònrachaidhean Bathar
| Brand | Nedis |
| Modail Àireamh | WIFIWC10WT |
| Meudan toraidh (L x W x H) | 8.6 x 3.5 x 8.6 cm |
| Cuideam | 180 g |
| Dath | Dubh |
| Modh-obrachaidh | AIR-OFF |
| Rangachadh làithreach | 6 Ampeadh |
| Dètage | 300 watt |
| Seòrsa Switch | Put Putan |
| Seòrsa stàladh | Srath balla |
| Pròtacal ceangail | Wi-Fi (2.4GHz) |
| Seòrsa Rianadair | Amazon Alexa, Neach-taic Google |
| Innealan co-fhreagarrach | Beatha glic Nedis |
| Rangachadh IP | IP65 |
| Gèilleadh | IP65, IEC 60669-2-1:2002 |
7. Fiosrachadh Barantais
This Nedis SmartLife Wi-Fi Wall Switch (WIFIWC10WT) comes with a 1-year limited warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, unauthorized modifications, accidents, or improper installation.
Feuch an glèidh thu an dearbhadh ceannach agad airson tagraidhean barantais.
8. Taic teachdaiche
For technical support, troubleshooting assistance, or warranty inquiries, please visit the official Nedis weblàrach-lìn no cuir fios chun roinn seirbheis teachdaiche aca.
- Nedis Weblàrach: www.nedis.com
- Thoir iomradh air an weblàrach-lìn airson fiosrachadh conaltraidh a tha sònraichte don sgìre agad.