Janome IT 1028 Glamour Sewing Machine User Manual

Ro-ràdh

Welcome to the world of sewing with your new Janome IT 1028 Glamour mechanical sewing machine. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your machine. Please read it thoroughly before using the machine to ensure optimal performance and longevity.

The Janome IT 1028 Glamour is designed for ease of use, featuring 12 stitch types, a free arm for circular sewing, an oscillating hook, automatic buttonholes, and adjustable stitch length and width. It also includes a double presser foot lift, feed dog lowering, a thread cutter, a needle threader, and a soft cover for protection.

Stiùireadh sàbhailteachd

Gus an cunnart bho chlisgeadh dealain, losgadh, teine ​​no leòn do dhaoine a lughdachadh:

• Tarraing am pluga den inneal a-mach às a’ phuing dealain dìreach an dèidh a chleachdadh agus mus glan thu e, mus toir thu air falbh còmhdaichean, no mus dèan thu atharrachaidhean seirbheiseachaidh sam bith leis an neach-cleachdaidh.
• Na leig leis an inneal a bhith air a chleachdadh mar dhèideag. Feumar aire shònraichte a thoirt nuair a bhios clann ga chleachdadh no faisg air.
• Use this machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer.
• Na cleachd an inneal seo gu bràth ma tha corda no pluga millte ann, mura h-eil e ag obair ceart, ma chaidh a leigeil sìos no a mhilleadh, no ma chaidh a leigeil ann an uisge.
• Na leig às no na cuir a-steach rud sam bith ann am fosgladh sam bith.
• Na cleachd a-muigh.
• Na bi ag obair far a bheilear a’ cleachdadh stuthan aerosol (spraeadh) no far a bheilear a’ toirt seachad ocsaidean.
• Cùm corragan air falbh bho gach pàirt gluasadach. Tha feum air cùram sònraichte timcheall air snàthad an inneal fuaigheil.
• Cleachd an clàr snàthad ceart an-còmhnaidh. Faodaidh an truinnsear ceàrr adhbhrachadh gu bheil an t-snàthad a’ briseadh.
• Na cleachd snàthadan lùbte.
• Na tarraing no na put an t-aodach fhad ’s a tha thu a’ fuaigheal. Dh’ fhaodadh seo an t-snàthad a thionndadh agus a dhèanamh briste.
• Cuir dheth an inneal fuaigheil nuair a bhios tu a’ dèanamh atharrachaidhean sam bith ann an raon na snàthaid, leithid a bhith a’ snàthadh na snàthaid, ag atharrachadh na snàthaid, a’ snàthadh a’ bhobain, no ag atharrachadh cas a’ bhrùthaidh.
• Always unplug the machine when removing the light bulb.
• Na dì-phlug thu le bhith a 'tarraing air a' chorda. Gus dì-phlug a thoirt a-steach, faigh grèim air a’ phlug, chan e an sreang.

Bathar seachadview

Prìomh fheartan

• 12 Stitch Types: Versatile options for various sewing projects.
• Gàirdean Saor: Facilitates sewing cuffs, sleeves, and other small, circular items.
• Oscillating Hook: Ensures smooth and consistent stitch formation.
• Fad is Leud Stitch Atharrachail: Provides control over stitch appearance.
• Automatic Four-Step Buttonhole: Simplifies the creation of professional-looking buttonholes.
• Double Presser Foot Lift: Allows for sewing thicker fabrics.
• Feed Dog Lowering: Useful for darning and free-motion quilting.
• Gearradair Snàth: Conveniently trims threads.
• Snàthadair Snàthaid: Assists in quickly threading the needle.
• Còmhdach bog: Protects the machine from dust and damage.

Co-phàirtean inneal

Familiarize yourself with the main parts of your Janome IT 1028 Glamour sewing machine.

Figear 1: Aghaidh view of the Janome IT 1028 Glamour sewing machine with the soft cover in place. This image shows the overall design and the stitch selection and length dials.

Figear 2: Dùin suas view of the stitch selector dial (left) and stitch length dial (right) on the Janome IT 1028 Glamour. The decorative illustration on the machine body is also visible.

Figure 3: The Janome IT 1028 Glamour sewing machine with the accessory tray removed, revealing the free arm and the bobbin case area. This view is essential for bobbin insertion and cleaning.

Suidhich

1. Unpacking agus Suidheachadh

• Thoir an inneal a-mach às a phacaid gu faiceallach.
• Cuir an inneal air uachdar seasmhach, còmhnard.
• Remove any protective films or packing materials.

2. Ceangal Cumhachd

• Dèan cinnteach gu bheil suidse cumhachd an inneil san t-suidheachadh "OFF".
• Ceangail an càball cumhachd ri socaid cuir a-steach cumhachd an inneil.
• Plug an sreang cumhachd a-steach gu ionad dealain iomchaidh.

3. A’ lùbadh a’ bhobain

• Cuir spool snàthainn air a 'phrìne spool.
• Treòraich an t-snàth tron ​​stiùireadh snàth àrd agus timcheall air diosc teannachaidh lùbadh a’ bhobain.
• Cuir an snàth tron ​​toll anns a’ bhoban bhon taobh a-staigh a-mach.
• Place the bobbin onto the bobbin winder spindle and push the spindle to the right.
• Start the machine. The bobbin will wind automatically. Stop when the bobbin is full.
• Cut the thread and push the bobbin winder spindle to the left. Remove the bobbin.

4. A’ cur a-steach a’ bhobain

• Cuir dheth an inneal.
• Open the bobbin cover plate located on the free arm.
• Insert the bobbin into the bobbin case with the thread running in the direction indicated by the arrows.
• Pull the thread through the tension spring and into the guide slot.
• Dùin còmhdach a’ bhobain.

5. A’ snàthadh an t-snàthainn uachdarach

• Àrdaich àrdachadh-coise na preasair.
• Cuir spool snàthainn air a 'phrìne spool.
• Treòraich an snàth tron ​​stiùireadh snàth àrd.
• Bring the thread down the right channel, up the left channel, and through the take-up lever from right to left.
• Continue guiding the thread down to the needle bar thread guide.
• Use the built-in needle threader or manually thread the needle from front to back.
• Tarraing mu 6 òirlich de shnàth tron ​​​​​​shùil snàthaid.

6. Bringing Up the Bobbin Thread

• Cum an t-snàthainn àrd gu socair le do làimh chlì.
• Turn the handwheel towards you to lower the needle into the needle plate and then raise it.
• The upper thread will catch the bobbin thread, forming a loop.
• Pull the loop to bring the bobbin thread up through the needle plate hole.
• Pull both threads (upper and bobbin) under the presser foot and towards the back of the machine.

Stiùireadh Obrachaidh

1. Taghadh Fuaigheil

Tionndaidh an Dial Selecter Stitch (refer to Figure 2) to choose your desired stitch pattern. The available stitches are indicated by letters or symbols on the dial.

2. A’ gleusadh fad is leud na fuaighe

• Fad Stitch: Cleachd an Dial Fad Stitch (refer to Figure 2) to adjust the length of your stitches. Higher numbers indicate longer stitches.
• Leud an fhuaim: For stitches that allow width adjustment, use the corresponding dial or setting. (Note: The Janome IT 1028 Glamour has adjustable stitch width, typically integrated with the stitch selector or a separate dial. Consult the machine's markings for specific controls.)

3. Basic Sewing

• Cuir an aodach agad fon chois preas.
• Lùghdaich an inneal-togail coise presser.
• Tionndaidh air an inneal.
• Gently press the foot controller to start sewing. The harder you press, the faster the machine will sew.
• Guide the fabric gently with your hands, but do not pull or push forcefully.
• To secure the beginning and end of a seam, use the reverse lever to sew a few stitches backward.
• When finished, raise the needle to its highest position, lift the presser foot, and pull the fabric away from the machine.
• Use the built-in thread cutter or scissors to trim the threads.

4. Using the Free Arm

To use the free arm, simply slide off the accessory tray (refer to Figure 3). This exposes the narrow free arm, ideal for sewing small, tubular items like sleeves, pant hems, and cuffs.

5. Automatic Four-Step Buttonholes

The Janome IT 1028 Glamour features an automatic four-step buttonhole function. Refer to the stitch selector dial for the buttonhole settings (usually marked with a buttonhole symbol and steps 1-4).

• Ceangail cas an toll putan.
• Mark the buttonhole position on your fabric.
• Set the stitch selector to the first buttonhole step.
• Fuaigheal a’ chiad taobh den toll-phutan.
• Change the stitch selector to the next step and sew the bar tack.
• Continue through all four steps, following the machine's markings for each segment of the buttonhole.
• Carefully cut open the buttonhole using a seam ripper, ensuring not to cut the stitches.

Cumail suas

1. A 'glanadh an inneal

Cuidichidh glanadh cunbhalach le bhith a’ cumail suas coileanadh an inneil agad. Tarraing a-mach am pluga bhon inneal an-còmhnaidh mus glan thu e.

• Raon a' Bhobain: Remove the needle plate and bobbin case. Use a small brush to remove lint and dust from the bobbin area and feed dogs.
• Taobh a-muigh: Wipe the exterior surfaces with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.

2. Ath-chur Snàthad

Replace the needle regularly (after 8-10 hours of sewing) or if it becomes bent, dull, or damaged. A damaged needle can cause skipped stitches or fabric damage.

• Cuir dheth an inneal agus thoir air falbh e.
• Fosgail an t-snàthad clamp sgriubha.
• Thoir air falbh an seann snàthad.
• Cuir snàthad ùr a-steach leis an taobh rèidh ri cùl an inneil, ga phutadh suas cho fada 's a thèid i.
• Dèan teann air an t-snàthad clamp sgriubha gu tèarainte.

Fuasgladh thrioblaidean

Tha an earrann seo a’ dèiligeadh ri cùisean cumanta a dh’ fhaodadh tu a thighinn tarsainn orra. Airson duilgheadasan nach eil air an liostadh an seo, cuir fios gu taic luchd-cleachdaidh.

Sònrachaidhean

• Àireamh Modail: 8100000017663 (IT 1028 Glamour)
• Brand: Eòin
• Stuth: Plastaig
• Cuideam: 8 cileagram
• Dimensions (P x L x H): 10 cm x 35 cm x 25 cm (Depth x Width x Height)
• Stòr cumhachd: Càball dealain
• Seòrsachan Fuaigheil: 12
• Seòrsa dubhan: Oscilling
• Buttonhole Type: Automatic Four-Step

Barantas agus Taic

For warranty information, service, or technical support, please refer to the warranty card included with your product or contact your authorized Janome dealer or customer service center. Keep your purchase receipt as proof of purchase.