TSL Platinum Professional Level 8 Channel NVR – 4K User Manual

1. Ro-ràdh

This manual provides instructions for the installation, operation, and maintenance of your TSL Platinum Professional Level 8 Channel NVR (Network Video Recorder), Model LTN8708Q P8. This NVR supports up to 8 channels of IP camera input, with resolutions up to 8 Megapixels, and utilizes H.265/H.265+/H.264/H.264 Zip+/MPEG4 video formats for efficient storage and high-quality video. Please read this manual thoroughly before operating the device to ensure proper use and to prevent damage.

Susbaint pacaid

Dearbhaich gu bheil na nithean uile a tha air an liostadh gu h-ìosal air an toirt a-steach sa phacaid agad. Ma tha nithean sam bith a dhìth no millte, cuir fios chun neach-reic agad.

• TSL Platinum Professional Level 8 Channel NVR Unit
• Adapter cumhachd
• Luchag USB
• Smachd Iomallach
• SATA Cables (for hard drive connection)
• Mounting Screws (for hard drive)
• Stiùireadh tòiseachaidh luath

Figear 1: NVR Package Contents. This image displays the power adapter, remote control, SATA data and power cables, and mounting screws that are typically included with the NVR unit.

2. Fiosrachadh Sàbhailteachd

Feuch an lean thu na ceumannan sàbhailteachd a leanas gus casg a chur air dochann no milleadh air an inneal:

• Dèan cinnteach gu bheil an solar cumhachd voltagTha e ceart mus ceangail thu an NVR.
• Na cuir an NVR fosgailte do uisge no taiseachd.
• Seachain an NVR a chur ann an solas dìreach na grèine no faisg air stòran teas.
• Install the NVR in a well-ventilated area to prevent overheating.
• Do not open the NVR casing. Thoir aire do luchd-obrach teisteanasach airson a h-uile seirbheis.
• Cleachd dìreach goireasan a shònraich an neach-dèanamh.

3. Toradh thallview

NVR Front and Rear Panels

Figear 2: NVR Front and Rear Panels. The top image shows the front panel with power, status, and Tx/Rx indicators, along with control buttons and a USB port. The bottom image displays the rear panel with PoE ports, audio in/out, LAN, HDMI, VGA, and power input.

Comharran is Smachdan Pannal Aghaidh:

• CUMHACHD: Comharra cumhachd.
• STAID: Comharra inbhe siostam.
• Tar-chur/Faigh-chur: Data transmission/reception indicator.
• Putanan smachd: For menu navigation and system control.
• Port USB: For mouse or USB storage device connection.

Eadar-aghaidhean Pannal Cùil:

• PoE Ports (8 channels): Connect IP cameras directly for power and data.
• FUAIM A-steach/a-mach: For external audio devices.
• Port LAN: Connect to your network router/switch.
• Toradh HDMI: Connect to a monitor for high-resolution video output (up to 4K).
• Toradh VGA: Connect to a monitor for video output (up to 1080p).
• Power Input (48V): Ceangail an inneal-atharrachaidh cumhachd a tha air a thoirt seachad.
• Switch cumhachd: To turn the NVR on/off.

Prìomh fheartan

• 8 channel PoE IP camera input, supporting cameras up to 8MP with a maximum incoming bandwidth of 80Mbps.
• H.265+ / H.265 / H.264+ / H.264 video formats for efficient compression.
• 2x SATA interfaces for hard drives (hard drives are not included).
• HDMI / VGA simultaneous output. HDMI output up to 4K@30Hz, VGA output up to 1080p@60Hz.
• Thoir taic beò view, storage, and playback of connected cameras.

4. Suidhich

4.1 Stàladh diosc cruaidh (Roghainneil)

The NVR requires a hard drive for video recording. Hard drives are not included and must be purchased separately. The NVR supports up to two SATA hard drives.

1. Unscrew agus thoir air falbh còmhdach àrd an NVR.
2. Connect the SATA data cable and power cable to the hard drive and the corresponding ports on the NVR motherboard.
3. Daingnich an draibh cruaidh ri chassis an NVR a’ cleachdadh nan sgriothan a tha air an toirt seachad.
4. Cuir an còmhdach àrd an àite agus daingnich e le sgriothan.

4.2 Connecting Cameras

Connect your IP cameras to the PoE ports on the rear panel of the NVR using Ethernet cables. The PoE ports provide both power and data connection to compatible cameras.

Figear 3: Camera Wiring Compatibility. This image illustrates that a standard network cable (Ethernet/PoE) is compatible for connecting cameras to this NVR, while traditional DC power and BNC video cables are not compatible.

4.3 Connecting to a Display and Network

• Ceangail monitor ri port toraidh HDMI no VGA an NVR.
• Ceangail luchag USB ri aon de phuirt USB an NVR.
• Connect the NVR's LAN port to your network router or switch using an Ethernet cable for network access and remote viewann an comasan.

4.4 A’ cur cumhachd air adhart

Connect the provided power adapter to the NVR's 48V power input and then plug it into a power outlet. Flip the power switch on the rear panel to the ON position. The NVR will boot up, and you should see the boot screen on your connected monitor.

5. Stiùireadh Obrachaidh

5.1 Draoidh Suidheachaidh Tùsail

Upon first boot, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up language, date/time, network settings, and hard drive initialization.

5.2 Beò View

Às dèidh an t-suidheachaidh thùsail, nochdaidh an NVR an taisbeanadh beò view de chamarathan ceangailte. Faodaidh tu atharrachadh eadar aon chamara view agus griod ioma-chamara view using the on-screen controls or the remote control.

5.3 Clàradh

The NVR supports continuous recording, scheduled recording, and motion-triggered recording. Configure recording schedules and settings via the main menu. Ensure your hard drive is initialized and healthy for recording.

5.4 Ath-chluich

Cothrom air a chlàradh footage through the playback menu. You can search for recordings by date, time, and event type. Use the playback controls to fast forward, rewind, and pause.

5.5 Network Access and Remote Viewing

Once the NVR is connected to your network, you can access it remotely via a web browser or a dedicated mobile application. Refer to the NVR's network settings for IP address and port information. Ensure proper port forwarding is configured on your router for external access.

6. Cumail suas

6.1 Riaghladh Draibh Chruaidh

Regularly check the status of your hard drives through the NVR's menu. Format hard drives periodically if necessary, or configure them for overwrite mode to ensure continuous recording.

6.2 Ùrachaidhean Firmware

Thoir sùil air an neach-dèanamh website for available firmware updates. Keeping your NVR's firmware up-to-date ensures optimal performance and security. Follow the provided instructions carefully when performing updates.

6.3 Glanadh

Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust and obstructions.

7. A ’dèanamh trioblaid

• Gun chumhachd:

  Ensure the power adapter is securely connected to both the NVR and a working power outlet. Check the power switch on the rear panel.
• Gun toradh bhidio:

  Verify the HDMI/VGA cable is securely connected to both the NVR and the monitor. Ensure the monitor is powered on and set to the correct input source.

• Camaraichean nach eil a’ taisbeanadh:

  Check that cameras are properly connected to the PoE ports. Ensure cameras are powered on and compatible with the NVR. Verify network settings for IP cameras.

• Gun chlàradh:

  Confirm that a hard drive is installed and properly initialized. Check recording schedules and ensure there is sufficient disk space. Verify camera connections.
• Cùisean Ruigsinneachd Iomallach:

  Ensure the NVR is connected to the network and has a valid IP address. Check router settings for port forwarding and firewall rules. Verify mobile app or web roghainnean brabhsair.

8. Sònrachaidhean

9. Barantas agus Taic

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official TSL weblàrach. Cùm do chuidhteas ceannach mar dhearbhadh ceannach airson tagraidhean barantais.

For further assistance, you may contact your local distributor or the manufacturer's customer service department.