Zerone Bluetooth MP3 WMA Decoder Board 8541723136 Instruction Manual

1. Ro-ràdh

This manual provides detailed instructions for the installation, operation, and maintenance of your Zerone Bluetooth MP3 WMA Decoder Board. Please read this manual thoroughly before using the product to ensure proper function and longevity.

2. Toradh thallview

The Zerone Bluetooth MP3 WMA Decoder Board is a versatile audio module designed to add modern connectivity to existing audio systems. It supports music playback from USB drives, TF cards, and Bluetooth-enabled devices. Additionally, it features an FM radio tuner and hands-free calling capabilities.

Prìomh fheartan:

• Bluetooth hands-free call support.
• Compatible with APE, FLAC, WAV, WMA, and MP3 lossless audio formats.
• Supports USB disk, TF card, Bluetooth, and FM radio modes.
• Power-off memory function retains last settings.
• Blue backlight display for clear visibility.
• A’ toirt a-steach smachd iomallach airson obrachadh goireasach.
• Multiple EQ sound modes and mute function.

Susbaint a’ phacaid:

• 1 x Bluetooth Decoder Board
• 1 x Smachd Iomallach
• 1 x Càball Cumhachd 2-prìne
• 2 x 3-pin Audio Output Cables

Figear 2.1: Aghaidh view of the decoder board, highlighting the USB port, TF card slot, display, and control buttons.

3. Suidhich

Careful wiring is essential for the correct operation of the decoder board. Ensure all connections are secure before applying power.

3.1 Ceangal cumhachd

The decoder board can be powered via two methods:

• DC 7V-12V: Use the provided 2-pin power cable to connect to a DC power source within this voltage range. Observe polarity (red for positive, black for negative).
• 5V Micro USB: Alternatively, power the board using a 5V Micro USB cable connected to the Micro USB port.

The operating current required is 800mA-1A.

3.2 Ceangal Toraidh Fuaim

Use the provided 3-pin cables to connect the audio output of the decoder board to your amplifier or active speakers. These cables typically provide left, right, and ground audio signals.

3.3 Ceangal Antenna FM

For optimal FM radio reception, connect an external antenna wire to the designated FM ANT hole located on the bottom back of the board. A simple wire can significantly improve signal strength.

Figear 3.1: Cùl view of the decoder board, illustrating the wiring points for power and audio output.

Figear 3.2: Gu h-àrd agus gu h-ìosal views of the decoder board, providing a comprehensive look at its internal structure and connection interfaces.

4. Stiùireadh Obrachaidh

The decoder board offers multiple playback modes and functions, controllable via the front panel buttons or the included remote control.

4.1 Cumhachd air / dheth

Connect the power supply. The board will automatically power on. To power off, use the power button on the remote control. If power is disconnected, the board will power on automatically when reconnected.

4.2 Taghadh Modh

Brùth an MODE button on the front panel or remote control to cycle through available modes: USB, TF, Bluetooth, and FM.

Figure 4.1: Illustration of the various input modes supported by the decoder board.

Ath-chluich Cairt USB/TF 4.3

Insert a USB flash drive into the USB port or a TF card into the TF card slot. The board will automatically switch to the respective mode and begin playing supported audio files (APE, FLAC, WAV, WMA, MP3).

4.4 Modh Bluetooth

1. Switch the decoder board to Bluetooth mode using the MODE button. The display will indicate Bluetooth mode.
2. On your mobile device, search for Bluetooth devices and select the one corresponding to the decoder board (e.g., "Bluetooth Speakers").
3. Once paired, you can play audio from your device through the decoder board.

Modh Rèidio 4.5 FM

1. Switch the decoder board to FM mode.
2. Sganadh fèin-ghluasadach: Brùth agus cùm an CLÀR/stad button to initiate an automatic scan for FM stations. The board will scan and save available stations as presets. Ensure an FM antenna is connected for best results.
3. Stèiseanan Atharrachaidh: Brùth goirid air an CLÀR/stad button to cycle through saved presets. Use the VOL+ or VOL- buttons (short press) to manually tune up or down frequencies.

4.6 Gairm gun làmhan

When a call is received in Bluetooth mode, the music will pause. Press the CLÀR/stad button to answer the call. Press it again to end the call. The integrated microphone allows for hands-free communication.

Figure 4.2: The decoder board supports hands-free calls when connected via Bluetooth.

4.7 Smachd tomhas-lìonaidh

Brùth agus cùm an VOL+ or VOL- buttons on the front panel or remote control to adjust the volume level.

4.8 Gnìomhan Smachd Iomallach

The remote control provides convenient access to all functions. Refer to the remote control diagram for button layout.

Figear 4.3: Mionaideach view of the remote control, showing various function buttons.

Figear 4.4: Leigidh an smachd iomallach leat obrachadh gu goireasach bho astar.

5. Cumail suas

To ensure the longevity and optimal performance of your decoder board, follow these simple maintenance guidelines:

• Glanadh: Use a soft, dry cloth to clean the surface of the board. Avoid using liquid cleaners or solvents, as they may damage the components.
• Àrainneachd: Operate the board in a dry environment, away from excessive heat, moisture, and direct sunlight.
• Ceanglaichean: Dèan sgrùdadh bho àm gu àm air a h-uile ceangal uèiridh gus dèanamh cinnteach gu bheil iad tèarainte agus saor bho chreimeadh.
• Stòradh: Ma tha thu a’ stòradh an inneil airson ùine mhòr, dì-cheangail e bhon stòr cumhachd agus stòraich e ann an àite fionnar, tioram.

6. A ’dèanamh trioblaid

If you encounter issues with your decoder board, refer to the following common problems and solutions:

7. Sònrachaidhean

8. Barantas agus Taic

For product support, technical assistance, or inquiries regarding your Zerone Bluetooth MP3 WMA Decoder Board, please refer to the official Zerone brand store or contact your retailer. Specific warranty details may vary by region and retailer.

Tadhail air an Zerone Store airson tuilleadh fiosrachaidh.