Acctim 71897 Cole Radio-Controlled Alarm Clock User Manual

Ro-ràdh

Thank you for choosing the Acctim 71897 Cole Radio-Controlled Alarm Clock. This manual provides important information on how to set up, operate, and maintain your new clock. Please read these instructions carefully before use and keep them for future reference.

Your Acctim radio-controlled clock is designed for convenience, featuring automatic time setting and adjustment for seasonal changes, ensuring atomic precision. The Superbrite backlight enhances visibility, especially in low-light conditions.

Bathar seachadview

The Acctim 71897 Cole is a compact, radio-controlled digital alarm clock with a multi-functional LCD display. It shows time, calendar, and indoor temperature. Its key features include:

• Radio-controlled time (UK and Ireland only) for automatic setting and daylight saving adjustments.
• Multi-functional LCD display showing time, calendar, and indoor temperature.
• Acctim Superbrite white backlight for easy night-time viewing.
• Alarm le gnìomh snooze.
• Compact dimensions: 6 x 7.2 x 4 cm (H x W x L).

Figear 1: Aghaidh view of the Acctim 71897 Cole Radio-Controlled Alarm Clock. The display shows the time, date, and temperature.

Suidhich

1. A' dì-phapadh

Carefully remove the clock from its packaging. Ensure all components are present and undamaged. Retain packaging for future transport or storage.

2. Stàladh bataraidh

1. Lorg còmhdach roinn a’ bhataraidh air cùl a’ chloca.
2. Sleamhnaich no dì-chrioptaich an còmhdach gus fhosgladh.
3. Cuir a-steach Bataraidh 2x AAA (not included) according to the polarity indicators (+ and -) inside the compartment.
4. Cuir an àite còmhdach roinn bataraidh gu tèarainte.

Thoir an aire: Always use fresh batteries. Do not mix old and new batteries, or different types of batteries.

3. Initial Time Setting (Radio Control)

Upon battery installation, the clock will automatically begin searching for the radio signal from the UK Atomic Clock transmitter. This process may take several minutes to an hour, depending on your location and signal strength. During this time, the display may show a signal icon flashing.

• Cuir a’ ghleoc faisg air uinneig airson an glacadh comharran as fheàrr.
• Avoid placing it near electronic devices that may cause interference.
• Once the signal is received, the clock will automatically set the correct time, date, and adjust for daylight saving time changes. A solid signal icon will appear on the display.

Cudromach: This radio-controlled feature is primarily designed for use within the UK and Ireland.

Stiùireadh Obrachaidh

1. Time and Display

The LCD display continuously shows the current time, date (day, month, year), and indoor temperature.

2. Superbrite Backlight

To activate the Superbrite white backlight for enhanced visibility in dark conditions:

• Press the large snooze/light button located on the top of the clock.
• The backlight will illuminate for a few seconds and then automatically turn off.

3. A ’suidheachadh an inneal-rabhaidh

Refer to the specific buttons on your clock (usually labeled "ALARM", "SET", or similar) for detailed alarm setting instructions. Generally, the steps involve:

1. Press the ALARM button to enter alarm setting mode.
2. Use the UP/DOWN or +/- buttons to adjust the hour.
3. Press ALARM again to confirm the hour and move to minute adjustment.
4. Use the UP/DOWN or +/- buttons to adjust the minute.
5. Press ALARM or SET to confirm and exit alarm setting mode.
6. Ensure the alarm is activated (an alarm icon will typically appear on the display).

4. Gnìomh Snooze

Nuair a tha an inneal-rabhaidh a 'fuaimeachadh:

• Press the large snooze/light button on the top of the clock to temporarily silence the alarm.
• The alarm will sound again after a few minutes (typical snooze duration is 5-10 minutes).
• To turn off the alarm completely, press any other button (e.g., ALARM OFF, SET, MODE) or allow it to sound for its full duration.

Cumail suas

1. Glanadh

Gus an gleoc a ghlanadh, cleachd clò bog, tioram. Na cleachd innealan-glanaidh sgrìobach, fuasglaidhean, no spraeirean ceimigeach, oir dh’ fhaodadh iad sin milleadh a dhèanamh air a’ ghleoc.asing no taisbeanadh.

2. Ath-nuadhachadh bataraidh

When the display becomes dim or the clock stops functioning correctly, it is time to replace the batteries. Follow the battery installation steps in the "Setup" section. Dispose of used batteries responsibly according to local regulations.

3. Stòradh

If the clock will not be used for an extended period, remove the batteries to prevent leakage and potential damage.

Fuasgladh thrioblaidean

• Clock not setting time automatically:

  Ensure batteries are correctly installed and fresh. Place the clock near a window and away from potential interference sources (e.g., TVs, computers, mobile phones). The radio signal is strongest overnight. Allow sufficient time (up to 24 hours) for the clock to receive the signal. This feature is optimized for UK and Ireland.

• Tha an taisbeanadh dorcha no bàn:

  Replace the batteries with new AAA batteries. Check battery polarity.

• Alarm gun fhuaim:

  Verify that the alarm is set and activated (check for an alarm icon on the display). Ensure the volume is not set to minimum if applicable (though this model typically has a fixed alarm sound).
• Leughadh teòthachd ceàrr:

  Ensure the clock is not placed in direct sunlight or near heat sources/vents, which can affect temperature accuracy.

Sònrachaidhean

Barantas agus Taic

Warranty information for your Acctim 71897 Cole Radio-Controlled Alarm Clock is typically provided with your purchase documentation or can be found on the official Acctim weblàrach. Cùm dearbhadh ceannach airson tagraidhean barantais.

For technical support or further assistance, please visit the official Acctim website or contact their customer service department. Contact details are usually available on the manufacturer's weblàrach no pacaigeadh toraidh.