1. Toradh thallview
The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.
Prìomh fheartan:
- Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
- Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
- Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
- Comas gearraidh: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
- Geàrd Sàbhailteachd: A protective guard for the cutting disc ensures user safety from chips and dust.
2. Stiùireadh Sàbhailteachd
Leugh agus tuig an-còmhnaidh a h-uile rabhadh sàbhailteachd, stiùireadh, dealbhan agus sònrachadh a tha air an toirt seachad leis an inneal cumhachd seo. Dh’ fhaodadh fàilligeadh ann a bhith a’ leantainn a h-uile stiùireadh a tha air a liostadh gu h-ìosal clisgeadh dealain, teine agus/no dochann dona adhbhrachadh.
Rabhaidhean sàbhailteachd coitcheann:
- Cuir ort uidheam dìon pearsanta (PPE) iomchaidh, a’ gabhail a-steach speuclairean sàbhailteachd, dìon-èisteachd, agus miotagan.
- Dèan cinnteach gu bheil an raon obrach glan, air a shoilleireachadh gu math, agus saor bho bhacaidhean.
- Cùm clann agus luchd-amhairc air falbh fhad ‘s a bhios tu ag obrachadh an inneil.
- Never operate the tool if the power cord or plug is damaged.
- Always disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
- Cleachd an lann cheart airson an stuth a thathar a 'gearradh.
- Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.
3. Co-phàirtean thairisview
Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:
- Cutting Table (Stainless Steel)
- Diamond Cutting Disc (180 mm diameter)
- Aonad motair
- Stòr-uisge
- Cutting Guide with Scale
- Angle Stop (-45° to +45°)
- Geàrd lann
- Tionndadh air / dheth
- A 'giùlan Handle
Figear 1: Os a chionnview of the Einhell TC-TC 800 Tile Cutter with its main parts.
4. Suidhich
Before operating the tile cutter, ensure proper setup for safety and optimal performance.
4.1 Unpacking agus Sgrùdadh
- Thoir air falbh na pàirtean gu lèir bhon phacaid gu faiceallach.
- Inspect the tool for any signs of damage during transit. Do not operate if damaged.
- Dèan cinnteach gu bheil na pàirtean uile a tha air an liostadh an làthair.
4.2 A’ lìonadh an tanca uisge
The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.
- Locate the water reservoir beneath the cutting table.
- Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
- Regularly check the water level during operation and refill as needed.
Figure 2: Filling the water reservoir for wet cutting.
4.3 Adjusting the Cutting Guide and Angle Stop
For accurate cuts, adjust the cutting guide and angle stop as required.
- The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
- For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.
Figure 3: Adjustable angle stop for miter cuts.
5. Stiùireadh Obrachaidh
Follow these steps for safe and effective tile cutting.
5.1 A’ cur cumhachd air/dheth
- Connect the tile cutter to a suitable power outlet (240 Volts).
- To turn on, press the green 'ON' button.
- To turn off, press the red 'OFF' button.
Figure 4: Power switch for turning the machine on and off.
5.2 Gearradh a dhèanamh
- Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
- Ensure the water pump is active and water is flowing to the blade.
- Turn on the tile cutter.
- Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
- Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.
Figure 5: Demonstrating a tile being cut with the machine.
5.3 Bhidio Bathar Oifigeil: Mar a chleachdas tu e
Video 1: This video demonstrates the basic operation and usage of a tile cutter, including setup and cutting techniques.
6. Cumail suas
Regular maintenance ensures the longevity and performance of your tile cutter.
6.1 Glanadh an Tasglann Uisge
After each use, clean the water reservoir to prevent buildup of tile dust and debris.
- Dì-cheangail an solar cumhachd.
- Remove the cutting table or access panel to reach the reservoir.
- Empty the dirty water and thoroughly clean the reservoir with fresh water.
- Reassemble na co-phàirtean.
6.2 Ath-nuadhachadh lann
Replace the diamond cutting disc when it becomes dull or damaged.
- Dèan cinnteach gu bheil an inneal air a dhì-phlugachadh.
- Use the provided tool to loosen the blade retaining nut.
- Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
- Tighten the retaining nut securely.
7. A ’dèanamh trioblaid
This section addresses common issues you might encounter with your tile cutter.
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Poor cut quality (chipping, uneven edges) | Dull or incorrect blade; insufficient water cooling; pushing too fast. | Replace blade with a suitable diamond disc; ensure water reservoir is full and pump is working; reduce feeding speed. |
| Water overflow from table | Water channels blocked; reservoir too full; uneven surface. | Clean water channels; do not overfill reservoir; ensure the machine is on a level surface. |
| Chan eil an inneal a’ tòiseachadh | Gun sholar cumhachd; suidse lochtach; duilgheadas leis a’ motair. | Check power connection and circuit breaker; test the power outlet; contact customer support if switch or motor is faulty. |
| Rusted screws/components | Lack of proper drying/maintenance after wet use. | Regularly clean and dry all metal components after use. Apply a rust preventative lubricant (e.g., WD-40) to screws and moving parts. |
8. Sònrachaidhean
| Feart | Mion-fhiosrachadh |
|---|---|
| Brand | Einhell |
| Modail Àireamh | 4301185 |
| Cumhachd | 800 watt |
| Voltage | 240 Volt |
| Luas | 2950 rpm |
| Diamond Cutting Disc Diameter | 180 mm |
| Àirde Gearraidh as motha (90°) | 34 mm |
| Àirde Gearraidh as motha (45°) | 14 mm |
| Angle of Cut | 45 ceum |
| Table Dimensions (L x W) | 39.6 cm x 38.5 cm |
| Meudan toraidh (L x W x H) | 39.6l. x 38.5an. x 25.5al. centimeters |
| Cuideam toraidh | 9.1 cileagram |
| Stòr cumhachd | Dealain le corda |
| Feartan sònraichte | Adjustable angle stop, parallel stop with scale |
9. Barantas agus Taic
9.1 Fiosrachadh Barantais
This Einhell product comes with a Barantas cuibhrichte 2-bliadhnaCùm dearbhadh ceannach airson tagraidhean barantais sam bith.
9.2 Taic teachdaiche
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell weblàrach-lìn no pacaigeadh an toraidh agad airson an fhiosrachadh conaltraidh as ùire.