Secukey SK4-W Standalone Access Control System

1. Ro-ràdh

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Secukey SK4-W Standalone Access Control System. Please read this manual carefully before installation and use to ensure proper functionality and safety.

The Secukey SK4-W is a robust, IP66-rated access control device designed for outdoor use, featuring RFID card and PIN code access. It is an ideal solution for securing doors, gates, and other entry points.

2. Toradh thallview

2.1 Prìomh fheartan

• IP66 Waterproof and Anti-Vandal Design: Suitable for harsh outdoor environments.
• Ioma modhan ruigsinneachd: Supports RFID card only, PIN code only, or Card + PIN for enhanced security.
• Comas Àrd-chleachdaiche: Manages up to 1000 users.
• Integrated Relay: Built-in NO, NC, Com relay for direct door lock control.
• Adjustable Output Times: Programmable lock output time (1-99 seconds) and alarm output time (1-3 minutes).
• Wiegand 26-bit Interface: Supports external Wiegand readers, exit buttons, and alarms.
• Latch Mode: Allows the door or gate to remain open.
• Leathan Voltage Raon: Operates on 12~28V AC/DC.
• Meur-chlàr backlit: A’ dèanamh cinnteach à faicsinneachd ann an suidheachaidhean solais ìosal.
• Togail seasmhach: Zinc alloy casing with powder coating.

2.2 Pàirtean air an gabhail a-steach

• 1 x Secukey SK4-W Standalone Access Control Device (RFID/PIN)
• 1 x Master Add Card
• 1 x Master Delete Card
• 1 x Leabhar-làimhe Cleachdaiche

2.3 Bathar Views

Figear 1: Aghaidh view of the SK4-W unit, highlighting the keypad and Secukey branding.

Figear 2: Ceàrnach view of the SK4-W, providing a perspective of its slim profile.

Figear 3: Taobh view of the SK4-W unit.

Figear 4: Taobh eile view of the SK4-W unit.

Figear 5: Air ais view of the SK4-W unit, displaying the integrated wiring for installation.

3. Setup agus Stàladh

3.1 A’ stàladh an inneal

The SK4-W is designed for surface mounting. Choose a secure location near the door or gate, ensuring it is within reach for users and protected from direct impact. Use appropriate screws and wall plugs for the mounting surface.

3.2 Diagram uèiridh

The device requires a 12~28V AC/DC power supply (not included). Connect the wires according to the diagram provided in the full manual. Ensure all connections are secure and insulated to prevent short circuits.

• Cur a-steach cumhachd: Connect to 12~28V AC/DC power source.
• Lock Output (NO/NC/COM): Connect to your electric lock.
• Toradh rabhaidh: Connect to an external alarm system (if applicable).
• Wiegand In/Out: For connecting external Wiegand readers or other Wiegand devices.
• Putan fàgail: Connect a push-to-exit button for convenient egress.

For detailed wiring schematics, please refer to the comprehensive wiring diagram included in the product packaging.

4. Stiùireadh Obrachaidh

4.1 Initial Setup and Master Cards

Upon first power-up, the device will be in factory default mode. Use the included Master Add Card and Master Delete Card to manage user access.

• A' cur luchd-cleachdaidh ris: Present the Master Add Card, then present the new user's RFID card or enter their PIN.
• Luchd-cleachdaidh a sguabadh às: Present the Master Delete Card, then present the user's RFID card or enter their PIN to be deleted.

4.2 Modhan Ruigsinneachd

The SK4-W supports three primary access modes:

1. Card Only Mode: Users gain access by presenting a valid RFID card.
2. PIN Only Mode: Users gain access by entering a valid 4-6 digit PIN code.
3. Card + PIN Mode: Users must present a valid RFID card and then enter their corresponding PIN code for access. This mode offers the highest security.

Refer to the full programming guide for instructions on how to switch between access modes and manage user PINs.

4.3 Visitor PINs

The SK4-W supports up to 10 visitor PINs, which can be set to be valid for 1 to 10 uses. This feature is useful for temporary access for guests or service personnel.

Figure 6: The SK4-W supports visitor PINs and is IP66 waterproof, suitable for outdoor installation.

4.4 Latch Mode

The latch mode allows the door or gate to remain unlocked for an extended period, which can be useful during peak hours or for maintenance. Consult the programming manual for activation and deactivation procedures.

5. Cumail suas

The Secukey SK4-W is designed for minimal maintenance due to its robust construction and IP66 rating. However, regular checks can prolong its lifespan and ensure optimal performance.

• Glanadh: Wipe the keypad and casing le bog, damp clò. Seachain innealan-glanaidh sgrìobach no fuasglaidhean.
• Sgrùdadh ceangail: Periodically inspect wiring connections for any signs of wear, corrosion, or loosening.
• Ùrachaidhean firmware: Thoir sùil air an neach-dèanamh weblàrach-lìn airson ùrachaidhean firmware sam bith a tha rim faighinn.

Figure 7: The SK4-W is designed to withstand extreme operating temperatures, from -40°C to 60°C.

6. A ’dèanamh trioblaid

If the problem persists, please contact Secukey technical support for assistance.

Figure 8: Wiegand 26-bit input and output signal timing diagram.

7. Sònrachaidhean

8. Barantas agus Taic

Secukey products are manufactured to high quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Secukey weblàrach.

Fiosrachadh conaltraidh:

• Dèanadair: Secukey
• Weblàrach: www.secukey.com (exampan ceangal, faodaidh an ceangal fhèin a bhith eadar-dhealaichte)
• Seirbheis teachdaiche: Thoir sùil air pacaigeadh an toraidh no weblàrach airson fiosrachadh conaltraidh taic roinneil.

Feuch an glèidh thu an dearbhadh ceannach agad airson tagraidhean barantais.