Nitrous Outlet 00-61002

Nitrous Outlet ProMax Dual Channel Progressive Controller Instruction Manual

Modail: 00-61002

Ro-ràdh

The Nitrous Outlet ProMax Progressive Controller is an advanced system designed to optimize nitrous delivery for performance applications. It integrates system activation and safety functions with extensive tuning and traction aids. This manual provides essential information for the proper installation, operation, and maintenance of your ProMax controller.

Susbaint pacaid

Dèan cinnteach gu bheil na pàirtean uile an làthair mus tòisich an stàladh:

  • ProMax Progressive Controller Unit
  • 20 Pin Connector Wiring Harness
  • USB Flash Drive (for software and tune storage)
  • USB Cable (for PC connection)
Nitrous Outlet ProMax Controller and included accessories

Figear 1: ProMax Progressive Controller, 20-pin connector, USB flash drive, and USB cable.

Stàladh agus stàladh

Proper installation is crucial for the safe and effective operation of the ProMax controller. It is recommended that installation be performed by a qualified technician.

  1. Stàladh an Riaghladair: Select a secure, dry location away from excessive heat and vibration. Ensure adequate space for wiring connections. The controller can be mounted using the integrated mounting tabs.
  2. Nitrous Outlet ProMax Controller installed in a vehicle's glove compartment

    Figear 2: Example installation of the ProMax controller in a vehicle's glove compartment.

  3. Ceanglaichean uèiridh: Connect the 20-pin wiring harness to the controller. Carefully follow the wiring diagram provided in the separate wiring guide (not included in this manual) for connecting to vehicle power, ground, sensors (Vehicle Speed, Trans Brake, MAP Sensor, Wide Band O2, Nitrous Pressure, Fuel Pressure), and solenoid drivers.
  4. Ceangal PC: Connect the controller to a PC/laptop using the provided USB cable for initial setup and programming.
  5. Stàladh bathar-bog: Install the ProMax tuning software from the provided USB flash drive onto your PC.
  6. Nitrous Outlet ProMax Controller with wiring harness and USB cable

    Figear 3: The ProMax controller with its wiring harness and USB cable for connection.

  7. Ùrachadh Firmware: Ensure the controller has the latest firmware. Firmware updates can be performed via the PC software.

Stiùireadh Obrachaidh

The ProMax controller offers extensive tuning capabilities. Refer to the software manual for detailed instructions on each function.

  • Progressive Control: Configure progressive ramps based on time, throttle percentage, engine RPM, vehicle speed, or manifold pressure. Adjustable frequency output (10-30 Hz) for solenoids.
  • Ioma S.tagtha: Control up to two independent stages using the built-in 70 Amp solenoid drivers.
  • Closed Loop Fuel Control: Configure one stage for closed-loop fuel adjustment based on wideband O2 input.
  • Tune Storage: Store up to 5 different tune-ups internally.
  • Ignition Retard: Utilize two ignition retard outputs for precise timing control.
  • RPM Window Switch: Integrated RPM window switch with multi-gear lockout feature.
  • Gnìomhachadh: Activate the system via TPS (Throttle Position Sensor) or WOT (Wide Open Throttle) switch.
  • Clàradh dàta: Record operational data for analysis and tuning optimization.
  • Resume/Restart Feature: Option for the controller to resume an interrupted time-based ramp or restart based on TPS going out of range.
  • Taisbeanadh Roghainneil: An optional 4.3-inch full touch screen display allows for real-time data viewing and setup without a PC.

Cumail suas

The Nitrous Outlet ProMax controller is designed for reliability with minimal maintenance. Adhere to the following guidelines:

  • Sgrùdadh cunbhalach: Periodically inspect all wiring connections for security and signs of wear or damage.
  • Glaineachd: Keep the controller unit clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive cleaners.
  • Ùrachaidhean firmware: Check the Nitrous Outlet weblàrach-lìn bho àm gu àm airson ùrachaidhean firmware gus dèanamh cinnteach à coileanadh as fheàrr agus ruigsinneachd air feartan ùra.
  • Dìon Àrainneachdail: Ensure the controller remains in a dry environment, protected from extreme temperatures and direct exposure to elements.

Fuasgladh thrioblaidean

This section provides general troubleshooting steps. For specific issues, consult the detailed software manual or contact technical support.

TrioblaidAdhbhar a dh’fhaodadh a bhith annFuasgladh
Chan eil an rianadair a’ cur cumhachd airUèirleadh ceàrr, fiùs air a shèideadh, ceangal sgaoilteVerify power and ground connections. Check vehicle fuses. Ensure harness is securely connected.
Nitrous system not activatingIncorrect activation settings, solenoid driver issue, sensor malfunctionCheck activation parameters in software (TPS, WOT, RPM). Test solenoid drivers. Verify sensor inputs.
PC software not connecting to controllerUSB cable issue, driver not installed, controller not poweredEnsure controller is powered. Try a different USB port/cable. Reinstall USB drivers.
Inconsistent nitrous deliveryIncorrect progressive ramp settings, pressure fluctuations, solenoid issuesReview progressive ramp settings. Check nitrous bottle pressure. Inspect solenoids for proper function.

Sònrachaidhean

FeartMion-fhiosrachadh
Modail Àireamh00-61002
DèanadairNitrous Outlet
Meudan toraidh6 x 7 x 12 òirleach
Cuideam nì3 not
Solenoid Drivers2 independent, 70 Amp
Progressive Frequency10-30 Hz (adjustable by 1 Hz)
Tune StorageUp to 5 internal tune-ups
Ignition Retard Outputs2
Cur a-steachVehicle Speed, Trans Brake, MAP Sensor, Two Wide Band O2 sensors, Two Nitrous Pressure Sensors, Fuel Pressure Sensor
CeangalachdUSB, CAN Bus Output
Feartan sònraichteUpdateable Firmware, Datalogging Capable, Multi-gear lockout, Resume and restart feature

Fiosrachadh Barantais

Nitrous Outlet products are manufactured to high standards. For specific warranty terms and conditions, please refer to the official warranty statement included with your product or visit the Nitrous Outlet official weblàrach. Cùm dearbhadh ceannach airson tagraidhean barantais.

Àicheadh ​​laghail: Nitrous Outlet is not responsible for parts not being smog-legal in your area. Many parts are not legal for sale or use in California, or on any pollution controlled vehicle. It is your responsibility to be aware of your local emissions laws and checking for legality of any parts purchased.

Taic

For technical assistance, questions regarding installation, operation, or troubleshooting, please contact Nitrous Outlet customer support:

  • Fòn: (866) 648-7637
  • Post-d: sales@nitrousoutlet.com
  • Weblàrach: Visit the official Nitrous Outlet website for additional resources, FAQs, and software downloads.

© 2025 Nitrous Outlet. All rights reserved.