Graco FinishPro HVLP 7.0 Standard Sprayer User Manual

1. Fiosrachadh Sàbhailteachd

RABHADH: Gus cunnart leòn a lùghdachadh, feumaidh an neach-cleachdaidh an leabhar-stiùiridh seo a leughadh agus a thuigsinn mus cleachd iad an toradh seo.

• Avoid eye contact with spray.
• Cleachd ann an àite le deagh fhionnarachadh.
• Wear appropriate protective gear, including eye protection, gloves, and a respirator.
• Dispose of chemicals and materials properly according to local regulations.
• Dì-cheangail an cumhachd an-còmhnaidh mus dèan thu glanadh no obair-chàraidh.
• Dèan cinnteach gu bheil a h-uile ceangal tèarainte mus obraich thu.

2. Toradh thallview

The Graco FinishPro HVLP 7.0 Standard Sprayer (Model 17N263) is designed for precise application of various coatings, offering control and a high-quality finish. Key features include:

• Ultimate Control: Ideal for projects requiring fine finish.
• Siostam Snàthaid: Includes a #3 size (1.3mm) needle, suitable for lacquers, stains, enamels, epoxies, urethane, and varnish. Needles are easily interchangeable.
• FlexLiner Bag System: Designed for lighter weight, easy cleanup, and ability to spray in any direction, including upside down. Facilitates quick color changes.
• Super-Flex Air Hose: 15% lighter than comparable hoses for improved control.
• TurboControl System: Allows adjustment of the TurboForce turbine speed to match performance requirements.
• EDGE II Gun: Features a 75% lighter trigger pull with EasyGlide technology.
• Standard Filtration System: Washable filter extends motor life and ensures a quality finish.

Figure 2.1: Graco FinishPro HVLP 7.0 Standard Sprayer unit.

Figure 2.2: The EDGE II Spray Gun with the FlexLiner cup system.

3. Suidhich

3.1 Unpacking agus Sgrùdadh

1. Thoir air falbh na pàirtean gu lèir bhon phacaid gu faiceallach.
2. Inspect all parts for any damage that may have occurred during shipping. Do not operate if damaged.
3. Dearbhaich gu bheil na pàirtean uile a tha air an liostadh san earrann “Dè a tha sa bhogsa” an làthair.

3.2 Seanadh

1. Connect the Super-Flex Air Hose to the HVLP unit and the EDGE II spray gun. Ensure connections are tight.
2. Attach the FlexLiner cup to the spray gun.
3. Select the appropriate needle for your material. The #3 (1.3mm) needle is included for fine finishes.
4. Ensure the filter is clean and properly installed in the unit.

Figure 3.1: The compact design allows for easy transport of the unit.

4. Stiùireadh Obrachaidh

4.1 Ullachadh Stuthan

1. Ensure your coating material is properly mixed and free of debris.
2. Pour the prepared material into the FlexLiner bag within the cup. Do not overfill.

4.2 Ag atharrachadh nan roghainnean

1. Turn on the HVLP unit.
2. Use the TurboControl System dial to adjust the turbine speed. Higher speeds are generally for thicker materials or faster application.
3. Adjust the material flow knob on the EDGE II gun to control the amount of material being sprayed.
4. Test the spray pattern on a scrap piece of material to ensure desired coverage and finish.

Figure 4.1: Adjust the material flow and air cap for optimal spray pattern.

4.3 Dòigh-obrach spraeraidh

• Cùm astar cunbhalach bhon uachdar (mar as trice 6-10 òirlich).
• Move the gun in smooth, even passes, overlapping each pass by about 50%.
• Leig às an inneal-brosnachaidh aig deireadh gach pas gus casg a chuir air cus stuthan a chruinneachadh.
• The FlexLiner system allows spraying at various angles, including upside down, for hard-to-reach areas.

Figure 4.2: Maintain consistent motion for an even finish.

Figure 4.3: The FlexLiner system enables spraying in any direction, including upside down.

4.4 Changing Needles and Colors

• To change needles, ensure the unit is off and depressurized. Follow the gun's instructions for needle removal and insertion.
• For quick color changes, remove the current FlexLiner bag and replace it with a new one containing the desired color. This minimizes cleanup between colors.

Figure 4.4: Needles can be changed with a simple click mechanism.

4.5 Bhideothan Bathar Oifigeil

5. Cumail suas

5.1 Glanadh an spraeire

1. After each use, disconnect the power.
2. Remove the FlexLiner bag and dispose of any remaining material properly.
3. Clean the spray gun thoroughly with appropriate cleaning solution (water for latex, solvent for oil-based paints).
4. Clean the needle and air cap.
5. Rinse the FlexLiner cup if reusing, or dispose of it.
6. Clean the exterior of the HVLP unit.

5.2 cumail suas sìoltachain

• Regularly inspect the standard filtration system filter.
• Clean the washable filter as needed to maintain optimal airflow and prevent motor strain.
• Cuir an criathrag na àite ma tha comharran milleadh no cus caitheamh air.

6. A ’dèanamh trioblaid

7. Sònrachaidhean

• Ainm a' mhodail: FinishPro HVLP 7.0 Standard Series
• Àireamh Modail: 17N263
• Brand: Gràco
• Meud tanca: 1 Ceathramh
• Dath: Gorm
• Stuth: Urethane
• Cuideam nì: 18 Punnd
• Fad Hose: 240 Inches (20 ft)
• Stòr cumhachd: Electric (120V AC, 11 A)
• Max. Brùthadh: 7 psi
• Meud nozzle: 1.3mm / 0.051 in (#3 needle)
• Max. Sruth: 65 cbm
• Pattern Size: 1/4 a-steach gu 12 a-steach
• Co-phàirtean air an toirt a-steach: Instruction Guide, EDGE II Spray Gun
• Meudan (W x H): 13.25"L x 14"À

Figure 7.1: Approximate dimensions of the HVLP unit.

8. Barantas agus Taic

The Graco FinishPro HVLP 7.0 Standard Sprayer comes with a Barantas cuibhrichte 3-bliadhna. For warranty claims, technical support, or replacement parts, please refer to the contact information provided in the included Instruction Guide or visit the official Graco weblàrach.

Poileasaidh Tilleadh: This product is eligible for a 30-day refund/replacement policy from the seller (Amazon).