AMD 199-999575

AMD Wraith Max Cooler with RGB LED Fan (Model 199-999575) User Manual

Modail: 199-999575

1. Ro-ràdh

This manual provides detailed instructions for the installation, operation, and maintenance of your AMD Wraith Max Cooler with RGB LED Fan. This high-performance CPU cooler is designed to efficiently dissipate heat from your processor, ensuring stable and optimal system performance. Please read this manual thoroughly before installation and use.

AMD Wraith Max Cooler with RGB LED fan, top-down view showing the fan and red LED ring.

Image 1.1: The AMD Wraith Max Cooler, featuring a black fan with an illuminated red RGB LED ring and a heatsink base with copper heat pipes.

2. Fiosrachadh Sàbhailteachd

  • Dì-cheangail an cumhachd bhon choimpiutair agad an-còmhnaidh mus cuir thu a-steach no mus toir thu air falbh pàirtean sam bith.
  • Handle the cooler and CPU with care to avoid damage to pins or components.
  • Ensure proper grounding to prevent electrostatic discharge (ESD).
  • Cùm a-mach à ruigsinn chloinne.
  • Do not operate the cooler if the fan blades are obstructed or damaged.

3. Pasgan-susbaint

Dèan cinnteach gu bheil a h-uile rud anns a’ phacaid agad:

  • AMD Wraith Max CPU Cooler with pre-applied thermal paste (or a small tube of thermal compound).
  • RGB LED connection cable (may vary by version, e.g., 4-pin or 5-pin).
  • Mounting brackets (if not pre-attached or integrated with the cooler). Note: Some versions may require existing motherboard mounting hardware.

4. Sònrachaidhean

FeartMion-fhiosrachadh
BrandAMD
Modail Àireamh199-999575
Meudan toraidh (L x W x H)3.15"F x 2.36"L x 3.15"À
Seòrsa Ceangal Cumhachd4-pin
Voltage12 Volt
Dètage140 watt
Modh fuarachaidhAir
Innealan co-fhreagarrachDesktop (AMD AM4 platform compatible)
Ìre fuaim38 Deicibeil
StuthMeatailt, plastaig
Cuideam nì1.2 Punnd
GTIN / UPC730143308779

5. Setup agus Stàladh

Follow these steps carefully to install your AMD Wraith Max Cooler. It is recommended to install the cooler with the motherboard removed from the PC case for easier access, especially if you are not experienced with CPU cooler installations.

  1. Ullaich am bòrd-màthar: Ensure your motherboard has the standard AMD AM4 retention bracket installed. If not, install the appropriate backplate and retention clips according to your motherboard's manual.
  2. Clean CPU Surface: If replacing an old cooler, carefully clean any old thermal paste from the CPU's integrated heat spreader (IHS) using isopropyl alcohol and a lint-free cloth.
  3. Cuir a-steach paste teirmeach: The Wraith Max Cooler often comes with pre-applied thermal paste. If not, apply a small pea-sized amount of thermal paste to the center of the CPU's IHS. Do not spread it manually; the pressure from the cooler will spread it evenly.
  4. Suidheachadh an fhuaradair: Carefully align the cooler over the CPU, ensuring the mounting clips on the cooler align with the retention bracket tabs on the motherboard.
  5. Dèan cinnteach gu bheil an fhuaradair tèarainte:
    • Hook the non-lever side of the cooler's mounting clip onto the corresponding tab of the motherboard retention bracket.
    • While applying gentle, even pressure, push down the lever on the opposite side of the cooler until it locks onto the second tab of the retention bracket. This step may require firm pressure.
  6. Ceangail Cumhachd an Luchd-leantainn: Connect the 4-pin fan cable from the cooler to the "CPU_FAN" header on your motherboard.
  7. Ceangail Càball RGB: Connect the RGB LED cable from the cooler to the appropriate RGB header on your motherboard (e.g., 4-pin 12V RGB header). Refer to your motherboard manual for the correct header location and type.
Taobh view of the AMD Wraith Max Cooler, showing the heatsink fins and copper heat pipes extending from the base.

Ìomhaigh 5.1: Neach-dùnaidh view of the AMD Wraith Max Cooler's heatsink and heat pipes, crucial for efficient heat transfer.

6. Stiùireadh Obrachaidh

Once installed, the AMD Wraith Max Cooler operates automatically, adjusting fan speed based on CPU temperature. The RGB LED lighting can be controlled via your motherboard's RGB software.

  • Gnìomhachd Fan: The fan speed is controlled by the motherboard's BIOS/UEFI settings or operating system software, typically based on CPU temperature. Ensure the fan is spinning freely after system startup.
  • Smachd Solais RGB:
    • Install the RGB control software provided by your motherboard manufacturer (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync).
    • Use the software to customize the color, effects, and brightness of the RGB LEDs on your Wraith Max Cooler.
    • If your motherboard lacks an RGB header or compatible software, the cooler may default to a specific color (e.g., red) or remain unlit, depending on the specific cooler version.

7. Cumail suas

Regular maintenance helps ensure optimal cooling performance and extends the lifespan of your cooler.

  • Glanadh Duslach: Periodically (every 3-6 months, or more often in dusty environments) use compressed air to clean dust from the heatsink fins and fan blades. Ensure the fan does not spin rapidly during cleaning to prevent damage to the bearings.
  • Pasgan Teirmeach: Thermal paste typically lasts for several years. If you notice increased CPU temperatures, consider reapplying fresh thermal paste. This involves carefully removing the cooler, cleaning old paste from both the CPU and cooler base, and applying new paste before reinstallation.
  • Sgrùdadh luchd-leantainn: Check the fan for any signs of damage, unusual noises, or obstructions. Replace the cooler if the fan is damaged or malfunctioning.

8. A ’dèanamh trioblaid

  • Teòthachdan CPU àrd:
    • Ensure the cooler is securely mounted and making good contact with the CPU.
    • Verify that the fan is spinning. If not, check the fan power connection to the motherboard.
    • Check if thermal paste was applied correctly or needs reapplication.
    • Clean any dust buildup from the heatsink fins.
    • Dèan cinnteach gu bheil sruth-adhair iomchaidh ann an cùis a’ PC agad.
  • Fan gun snìomh:
    • Check the 4-pin fan cable connection to the "CPU_FAN" header on the motherboard.
    • Verify fan settings in the motherboard's BIOS/UEFI.
    • Dèan cinnteach nach eil bacadh air lannan an luchd-leantainn.
  • RGB Lights Not Working/Incorrect Color:
    • Check the RGB LED cable connection to the motherboard's RGB header. Ensure it's connected to the correct type of header (e.g., 12V GRB for 4-pin).
    • Verify that your motherboard's RGB software is installed and configured correctly.
    • Ensure the RGB cable is fully seated and not damaged.

9. Barantas agus Taic

Airson fiosrachadh barantais agus taic theicnigeach, thoir sùil air làrach-lìn oifigeil AMD weblàrach no cuir fios chun neach-reic agad. Cùm dearbhadh do cheannach airson tagraidhean barantais.

Airson tuilleadh cuideachaidh, tadhal air an Taic AMD weblàrach.