KWANWA KW715S 2-in-1 Alarm Clock and Indoor Thermometer Instruction Manual

1. Toradh thallview

The KWANWA KW715S is a versatile 2-in-1 device functioning as both a digital alarm clock and an indoor thermometer. Designed for portability and ease of use, it features a clear digital display, adjustable brightness, and long-lasting battery operation. Simply flip the device to switch between time and temperature display modes.

2. Suidhich

2.1 Stàladh bataraidh

The KWANWA KW715S operates on Bataraidhean alcaileach 2x AA (not included). Ensure correct polarity when inserting the batteries into the compartment located on the back of the device.

2.2 Suidheachadh Tùsail na h-Ùine

1. Brùth agus cùm an SEANN TIOMNAIDH button (located on the back) for 2 seconds until the hour digits begin to flash.
2. Cleachd an UAIR agus MIN putanan gus an ùine atharrachadh.
3. Brùth SEANN TIOMNAIDH a-rithist gus dearbhadh agus modh suidheachadh ùine fhàgail.

2.3 Taghadh Aonad Teòthachd (°C/°F)

The device allows you to switch between Celsius (°C) and Fahrenheit (°F) display modes. This can be done by flipping the clock over to display temperature, then using the dedicated °C/°F button if available, or by following specific instructions in the operating section.

3. Stiùireadh Obrachaidh

3.1 A' suidheachadh an Alarm

1. Brùth agus cùm an AL SET button (on the back) for 2 seconds until the alarm hour digits flash.
2. Cleachd an UAIR agus MIN putanan gus an ùine rabhaidh a tha thu ag iarraidh a shuidheachadh.
3. Brùth AL SET again to confirm and exit alarm setting mode.

3.2 Alarm air / dheth

Cleachd an AL AIR/DHETH switch (on the back) to activate or deactivate the alarm. When the alarm is active, an alarm icon will appear on the display.

3.3 Gnìomh Snooze

When the alarm sounds, gently touch the large SNOZE button on the top of the clock. This will temporarily silence the alarm for 7 minutes. The snooze function can be repeated up to 3 times.

3.4 Adjustable Brightness

Brùth an SEANN TIOMNAIDH button for 2 seconds to cycle through 3 levels of brightness: low, middle, and high. The clock also features an automatic night mode, which dims the display between 8:00 PM and 6:00 AM to create a peaceful sleeping environment.

3.5 Switching Between Time and Temperature

To switch between displaying the time and the indoor temperature, simply flip the alarm clock upside down. The display will automatically change to show the current indoor temperature.

3.6 12-Hour / 24-Hour Mode

The clock supports both 12-hour and 24-hour time formats. Refer to the buttons on the back for the specific button to toggle between these modes (e.g., a dedicated 12/24 HR putan).

4. Cumail suas

4.1 Ath-nuadhachadh bataraidh

The device features a low battery indicator. When this indicator appears, it is time to replace the 2x AA alkaline batteries to ensure continuous operation and accurate readings. The improved design allows batteries to last over 1 year.

4.2 Glanadh

To clean the clock, use a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the display or casing.

5. A ’dèanamh trioblaid

• Sgrionadh taisbeanaidh: If you observe flickering in videos of the product, please note that this is often an artifact of video recording and not indicative of actual product performance. The display is stable in real-life use.
• Alarm gun fhuaim: Dèan cinnteach gu bheil an AL AIR/DHETH switch is in the 'ON' position. Verify that the alarm time is correctly set. Check the battery level and replace batteries if the low battery indicator is active.
• Incorrect Time/Temperature: Re-set the time following the instructions in Section 2.2. For temperature, ensure the device is placed in a stable indoor environment away from direct heat sources or drafts for accurate readings.
• Comharra bataraidh ìosal: This icon signals that the batteries are running low and should be replaced soon.

6. Sònrachaidhean

7. Barantas agus Taic

For warranty information or product support, please contact KWANWA customer service at: taic@odokeeshop.com.