PeakTech P 2800A Professional Laser Distance Meter User Manual

1. Ro-ràdh

The PeakTech P 2800A is a professional laser distance meter designed for precise and reliable measurements in various applications, including construction, architecture, and landscaping. This device offers a measurement range from 0.05 meters to 40 meters with high accuracy. It features a multi-line backlit LCD display and quick selection keys for advanced functions such as area, volume, and Pythagorean calculations, as well as addition and subtraction. The internal memory can store up to 99 measurement values for convenient recall. An integrated 90° flip-out stop ensures accurate alignment from edges or corners, enhancing measurement precision.

2. Stiùireadh Sàbhailteachd

Leugh agus tuig a h-uile stiùireadh sàbhailteachd mus cleachd thu an inneal. Mura lean thu na stiùiridhean seo dh’ fhaodadh sin leantainn gu nochdadh do rèididheachd laser, clisgeadh dealain, teine ​​no dochann dona.

• Sàbhailteachd laser: This device uses a Class 2 laser. Do not stare directly into the laser beam or direct it at other people or reflective surfaces. Laser radiation can cause eye injury.
• Sàbhailteachd bataraidh: Use only specified alkaline AAA batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period to prevent leakage.
• Àrainneachd Obrachaidh: Do not operate the device in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep the device away from water and high humidity.
• Cumail suas: Do not attempt to modify or disassemble the device. Repairs should only be performed by qualified personnel.

3. Pasgan-susbaint

Dèan cinnteach gu bheil a h-uile nì anns a’ phacaid:

• PeakTech P 2800A Laser Distance Meter
• Poca crios
• 2 x Bataraidhean Alcaileach 1.5V AAA
• Leabhar-làimhe Cleachdaiche (Gearmailtis agus Beurla)
• Dearbhadh Calibration

4. Inneal thairisview

Familiarize yourself with the components and controls of your PeakTech P 2800A Laser Distance Meter.

Figear 1: PeakTech P 2800A Laser Distance Meter front view, showing the multi-line LCD display and control buttons. This image provides a general overview of the device's layout.

Figear 2: PeakTech P 2800A Laser Distance Meter mounted on a mini tripod, demonstrating its tripod thread for stable and precise measurements, especially over longer distances.

Figear 3: Faisg air làimh view of the integrated bubble level on the PeakTech P 2800A Laser Distance Meter, used to ensure the device is perfectly horizontal for accurate measurements.

Figear 4: PeakTech P 2800A Laser Distance Meter with its 90-degree flip-out stop extended, used for precise measurements from edges or corners, ensuring the measurement starts exactly from the reference point.

Key Buttons and Display Elements:

• MEAS (Red Button): Initiates measurement, confirms selections.
• OFF/CLEAR (Red Button): Powers off the device, clears current measurement/selection.
• AONAD: Changes measurement units (m, in, ft).
• +: Addition function, navigates menus.
• -: Subtraction function, navigates menus.
• Area/Volume Button: Toggles between area and volume measurement modes.
• Pythagorean Button: Activates indirect measurement modes.
• Putan Puing-iomraidh: Changes the measurement reference point (front, rear, flip-out stop).
• Putan Cuimhne: A’ faighinn cothrom air tomhasan a chaidh a stòradh.
• Putan Backlight: Toggles display backlight.
• Taisbeanadh LCD: Multi-line display showing current measurements, previous results, and function icons.

5. Suidhich

5.1 Stàladh bataraidh

1. Lorg còmhdach roinn a’ bhataraidh air cùl an inneil.
2. Sleamhnaich no dì-chrioptaich an còmhdach gus an roinn fhosgladh.
3. Cuir a-steach dà bataraidh alcalin 1.5V AAA, a’ dèanamh cinnteach gu bheil iad ceart ann am polarachd (+/-).
4. Dùin an còmhdach roinn bataraidh gu tèarainte.

The device will automatically power on or can be powered on by pressing the MEAS putan.

6. Stiùireadh Obrachaidh

6.1 Cumhachd air / dheth

• Cumhachd air: Brùth an MEAS putan.
• Cumhachd dheth: Brùth agus cùm an AIRSON/FIOSRACHADH button for a few seconds, or the device will automatically power off after approximately 150 seconds of inactivity.

6.2 Ag atharrachadh Aonadan Tomhais

Brùth an AONAD button repeatedly to cycle through the available units: meters (m), inches (in), and feet (ft).

6.3 Setting the Reference Point

The device can measure from its front edge, rear edge, or the extended 90° flip-out stop. Press the Puing iomraidh button to switch between these options. The current reference point is indicated on the display.

6.4 Tomhas Astair Singilte

1. Stiùirich an laser air an targaid.
2. Brùth an MEAS brùth air a’ phutan aon uair gus an laser a ghnìomhachadh.
3. Brùth an MEAS button again to take the measurement. The result will be displayed.

6.5 Tomhas Leantainneach (Min/Max)

1. Brùth agus cùm an MEAS brùth air a’ phutan airson timcheall air 2 dhiog. Thèid an inneal a-steach do mhodh tomhais leantainneach.
2. Move the device slowly to measure different points. The display will show the current, minimum, and maximum measured distances.
3. Brùth MEAS a-rithist gus stad a chur air tomhas leantainneach.

6.6 Tomhas Sgìre

1. Brùth an Sgìre/Meud button once to enter area measurement mode. An icon for area will appear on the display.
2. Tomhais a’ chiad taobh (m.e., fad) le bhith a’ putadh MEAS.
3. Tomhais an dàrna taobh (m.e., leud) le bhith a’ putadh MEAS.
4. The calculated area will be displayed.

6.7 Tomhas Tomhas

1. Brùth an Sgìre/Meud button twice to enter volume measurement mode. An icon for volume will appear.
2. Tomhais an fhaid le bhith a’ putadh MEAS.
3. Tomhais an leud le bhith a’ putadh MEAS.
4. Tomhais an àirde le bhith a’ putadh air MEAS.
5. The calculated volume will be displayed.

6.8 Tomhas Pythagorean (Tomhas Neo-dhìreach)

This function allows indirect measurement of heights or distances using the Pythagorean theorem. There are typically several modes (e.g., two-point, three-point). Refer to the on-screen icons for guidance.

1. Brùth an Pythagorean button to select the desired indirect measurement mode.
2. Follow the on-screen prompts to take the required measurements (e.g., hypotenuse, base).
3. The device will calculate and display the unknown height or distance.

6.9 Cur-ris agus Toirt-às

Às dèidh dhut tomhas a ghabhail, faodaidh tu tomhasan às dèidh sin a chur ris no a thoirt air falbh:

1. Gabh tomhas.
2. Brùth an + putan airson cur ris no - putan airson toirt air falbh.
3. Take the next measurement. The result will be added to or subtracted from the previous value.
4. Dèan ath-aithris mar a dh 'fheumar.

6.10 Dreuchd Cuimhne

The device can store up to 99 measurement values.

• Stòr: Tha tomhais air an stòradh gu fèin-ghluasadach.
• Cuimhnich: Brùth an Cuimhne putan gu view stored values. Use the + agus - buttons to scroll through the memory.
• Cuimhne ghlan: Refer to the detailed user manual for specific instructions on clearing memory, as this may vary.

7. Cumail suas

• Glanadh: Cleachd bog, damp cloth to clean the device. Do not use abrasive cleaners or solvents. Clean the laser lens carefully with a soft cloth, similar to cleaning camera lenses.
• Stòradh: Store the device in its belt pouch in a cool, dry place when not in use. Remove batteries if storing for extended periods.
• Ath-nuadhachadh bataraidh: Cuir bataraidhean ùra an àite nuair a nochdas comharra bataraidh ìosal air an taisbeanadh.

8. A ’dèanamh trioblaid

9. Sònrachaidhean

10. Barantas agus Taic

PeakTech products are manufactured with high quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your local PeakTech distributor. For technical support or service inquiries, please visit the official PeakTech weblàrach-lìn no cuir fios chun roinn seirbheis teachdaiche aca.