1. Ro-ràdh
Thank you for choosing the Hansa Basic Jet 3-Jet Shower/Hand Shower. This manual provides essential information for the safe installation, operation, and maintenance of your new shower head. Please read these instructions carefully before use and retain them for future reference.
The Hansa Basic Jet is designed to provide a versatile showering experience with three distinct spray modes and a durable chrome finish.
Image 1.1: The Hansa Basic Jet 3-Jet Shower/Hand Shower, showcasing its chrome finish and nozzle design.
2. Fiosrachadh Sàbhailteachd
Feuch an lean thu na stiùiridhean sàbhailteachd a leanas gus casg a chur air dochann no milleadh air an toradh:
- Dèan cinnteach gu bheil a h-uile ceangal tèarainte agus dìonach bho uisge gus casg a chur air aodion.
- Do not use abrasive cleaners or solvents on the shower head, as this may damage the finish.
- Cuir dheth am prìomh sholar uisge an-còmhnaidh mus feuch thu ri stàladh no cumail suas sam bith.
- Mura h-eil thu cinnteach mu cheumannan stàlaidh sam bith, bruidhinn ri plumaire teisteanasach.
- The maximum operating temperature for this product is 60°C (140°F).
3. Pasgan-susbaint
Dèan cinnteach gu bheil na pàirtean uile anns a’ phacaid:
- Hansa Basic Jet 3-Jet Shower/Hand Shower (Model 44630300)
- Leabhar-làimhe stiùiridh
Note: The shower hose and wall bracket are typically sold separately.
4. Setup agus Stàladh
Follow these steps to install your Hansa Basic Jet Shower/Hand Shower:
- Ullaich an raon stàlaidh: Ensure the main water supply to your shower is turned off.
- Thoir air falbh an Seann Cheann-fras (ma tha sin iomchaidh): Sgrìob às do cheann fras a th’ ann mar-thà bhon phìob fras.
- Connect the New Shower Head: The Hansa Basic Jet features a standard G 1/2 hose connection. Screw the new shower head onto your existing shower hose. Hand-tighten first, then use a wrench to gently tighten, ensuring not to overtighten.
- Thoir sùil airson Leaks: Turn on the main water supply and check all connections for any leaks. If leaks occur, tighten the connection slightly more.
Image 4.1: Isometric view of the shower head, illustrating the G 1/2 hose connection point at the base of the handle.
5. Stiùireadh Obrachaidh
Your Hansa Basic Jet Shower/Hand Shower offers three distinct spray modes for a customized showering experience. To switch between modes, gently rotate the spray plate on the shower head.
- Modh fois: Provides a soft, wide spray for a gentle and soothing shower.
- Refreshing Mode: Delivers a more focused and invigorating spray, ideal for rinsing.
- EcoFlow Mode: Designed to reduce water consumption while maintaining an effective spray.
Image 5.1: The Hansa Basic Jet shower head in operation, demonstrating a typical spray pattern.
6. Cumail suas
Regular cleaning and maintenance will ensure the longevity and optimal performance of your shower head.
A 'glanadh ceann fras
- Glanadh làitheil: Wipe the shower head with a soft, damp clò às dèidh gach cleachdaidh gus casg a chur air spotan uisge agus cruinneachadh sgrìob siabann.
- Toirt air falbh aoil: The Hansa Basic Jet features anti-limescale technology. For stubborn limescale deposits, gently rub the silicone nozzles to dislodge mineral buildup.
- Glanadh domhainn: For a more thorough clean, use a mild soap solution or a specialized bathroom cleaner designed for chrome finishes. Apply with a soft cloth, rinse thoroughly with water, and dry immediately to prevent water spots.
- Seachain: Do not use abrasive sponges, scouring pads, or harsh chemical cleaners (e.g., bleach, ammonia-based products) as these can damage the chrome finish and plastic components.
7. A ’dèanamh trioblaid
Ma thachras tu ri duilgheadasan leis a’ cheann fras agad, thoir sùil air na duilgheadasan agus na fuasglaidhean cumanta a leanas:
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Sruth uisge ìosal | Clogged nozzles due to limescale; low water pressure from supply. | Clean the nozzles by rubbing them. Check your home's water pressure. Ensure the minimum flow rate of 9 L/min is met. |
| Pàtran spraeraidh neo-riaghailteach | Blocked nozzles. | Clean the nozzles thoroughly to remove any blockages. |
| Aodion aig ceangal pìoba | Loose connection; worn washer. | Tighten the hose connection. Replace the washer if it appears damaged. |
8. Sònrachaidhean
Detailed technical specifications for the Hansa Basic Jet Shower/Hand Shower:
- Àireamh Modail: 44630300
- Brand: Hansa
- Stuth: Plastic (Composite)
- Crìochnaich: Chrome
- Trast-thomhas ceann: 95 mm (3.74 òirleach)
- Ceangal Hose: G 1/2
- Number of Spray Modes: 3 (Relaxing, Refreshing, EcoFlow)
- Ìre sruth: 14 L/min (at 3 bar flow pressure)
- Ìre sruth as ìsle a thathar a’ moladh: 9 l / min
- Meudan toraidh: 3.74 x 3.74 x 8.66 òirleach
- Cuideam nì: 5.3 unnsa
- Feartan sònraichte: Eco flow control, Anti-limescale technology
Image 8.1: Technical drawing illustrating the dimensions (diameter 95mm, length 180mm) and G 1/2 hose connection of the Hansa Basic Jet shower head.
9. Barantas agus Taic
For information regarding warranty terms and conditions, please refer to the documentation provided at the time of purchase or visit the official Hansa website. If you require technical assistance or have questions not covered in this manual, please contact Hansa customer support.