CDVI 433MHz Radio Keypad and Receiver User Manual

1. Ro-ràdh

This manual provides detailed instructions for the installation, operation, and maintenance of the CDVI 433MHz Radio Keypad (Digicode) and its associated SEL2641R433NN 1-Relay 12V Receiver. This system is designed for secure access control applications.

Please read this manual thoroughly before attempting any installation or operation to ensure proper functionality and safety.

Figure 1: CDVI 433MHz Radio Keypad and SEL2641R433NN Receiver. The image shows the silver-colored keypad with illuminated blue numbers (0-9, A, B, C) and a transparent plastic receiver unit.

2. Fiosrachadh Sàbhailteachd

• Dèan cinnteach gu bheil a h-uile cumhachd air a dhì-cheangal mus tèid a stàladh no a chumail suas.
• Bu chòir an stàladh a bhith air a dhèanamh le luchd-obrach le teisteanas a-mhàin.
• Do not expose the keypad or receiver to extreme temperatures, moisture, or direct sunlight.
• Use only specified power supply (12V).
• Cùm a-mach à ruigsinn chloinne.

3. Setup agus Stàladh

3.1. Co-phàirtean thairisview

The system consists of two main components:

• Radio Keypad (Digicode): The input device for entering access codes.
• SEL2641R433NN Receiver: The unit that receives signals from the keypad and controls the access mechanism (e.g., door lock).

3.2. A 'stàladh a' mheur-chlàir

1. Choose a suitable mounting location, typically near the access point, ensuring it is protected from direct weather exposure if outdoors.
2. Mark the drilling points using the keypad's mounting plate as a template.
3. Drile tuill agus cuir plugaichean balla iomchaidh a-steach.
4. Dèan tèarainte air a 'phlàta sreap chun a' bhalla.
5. Attach the keypad securely to the mounting plate.

3.3. Uèirleadh an Glacadair

The SEL2641R433NN receiver requires a 12V power supply and connection to the access control device. Refer to the wiring diagram below for typical connections.

• Cur a-steach cumhachd: Connect 12V DC to the designated terminals. Observe polarity.
• Toradh sealaidheachd: The receiver has one relay. Connect the Normally Open (NO) or Normally Closed (NC) contacts to your access control device (e.g., electric strike, magnetic lock) as required.

(Note: A detailed wiring diagram is typically provided with the physical product. Consult it for specific terminal assignments.)

4. Stiùireadh Obrachaidh

4.1. Tòiseachadh Cumhachd Tùsail

Once the receiver is wired and powered, it will enter a standby mode. The keypad will illuminate when a button is pressed.

4.2. Programming Access Codes

The keypad and receiver must be paired, and access codes programmed. This process typically involves:

1. A’ dol a-steach don mhodh prògramaidh: This usually involves a master code or a physical button on the receiver.
2. Adding New Codes: Follow the specific sequence to input new user codes (e.g., Master Code + * + New Code + #).
3. Deleting Codes: Follow the specific sequence to remove existing user codes.
4. Modh Prògramadh a-mach: Save changes and exit programming mode.

(Note: Refer to the specific programming instructions provided with your product for exact key sequences and procedures, as these can vary by firmware version.)

4.3. A’ toirt cothrom

To grant access, simply enter a valid programmed code on the keypad. Upon successful code entry, the receiver's relay will activate for a pre-set duration, unlocking the connected device.

5. Cumail suas

• Glanadh: Glan uachdar a’ mheur-chlàir le clò bog, tioramamp aodach. Na cleachd luchd-glanaidh sgudail no solventan.
• Sgrùdaidhean cunbhalach: Periodically check all wiring connections for security and integrity, especially for the receiver unit.
• Riaghladh Còd: Gu cunbhalach a-rithistview and update access codes for security purposes. Delete codes of former users.

6. A ’dèanamh trioblaid

7. Sònrachaidhean

8. Barantas agus Taic

Information regarding product warranty is typically provided with the purchase documentation or can be found on the manufacturer's official weblàrach. Cùm dearbhadh ceannach airson tagraidhean barantais.

For technical support or further assistance, please contact CDVI customer service or your authorized dealer. Contact details can usually be found on the CDVI weblàrach (www.cdvi.com).