POTEK 5000W-MSW
POTEK 5000W Power Inverter Instruction Manual
Model: 5000W-MSW
Stiùireadh sàbhailteachd cudromach
Please read and understand all safety instructions before installing or operating the POTEK 5000W Power Inverter. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Cùm an inverter air falbh bho uisge, taiseachd, agus stuthan lasanta.
- Dèan cinnteach gu bheil fionnarachadh ceart timcheall an inverter gus casg a chuir air cus teasachadh.
- Na fosgail an inneal-tionndaidh casing. Chan eil pàirtean sam bith a dh’ fhaodas an neach-cleachdaidh a chàradh a-staigh.
- Ceangail an inverter ri stòr cumhachd 12V DC a-mhàin.
- Always connect the ground wire properly to prevent electric shock.
- Disconnect the positive battery terminal before performing any wiring to the inverter.
- Avoid direct sunlight exposure; keep the inverter in a cool environment.
- Do not leave the power inverter in the ON position while your car is off to prevent battery drain.
Bathar seachadview
The POTEK 5000W Power Inverter converts 12V DC battery power to 110V AC household power, providing a reliable power source for various electronic devices.
Feartan
- Provides 5000 watts continuous power, 10000 watts surge power.
- Equipped with 4 AC outlets and 2 USB ports (DC 5V/2A).
- Multi-protection features: overload, overheat, low voltage, àrd voltage, and short circuit.
- Intelligent cooling fan operates silently when the heatsink temperature is below 104℉ (40℃), conserving battery power.
- Modified sine wave output.
Co-phàirtean

Ìomhaigh: Aghaidh is cùl view of the POTEK 5000W Power Inverter, highlighting AC outlets, USB ports, power switch, LED display, cooling fans, and battery terminals.
The inverter features 4 standard AC outlets and 2 USB ports on the front panel for connecting your devices. The rear panel includes terminals for connecting to a 12V DC battery, along with cooling fans to regulate internal temperature.
Stàladh agus stàladh
Dè th' anns a' Bhocsa
- 1x POTEK 5000W Power Inverter
- 6x Car Battery Cables (3 red, 3 black, 3.28 ft each)
- 1x Leabhar-làimhe Cleachdaiche

Image: Dimensions of the POTEK 5000W Power Inverter and included battery cables and ground wire.
A 'ceangal an Inverter
- Dèan cinnteach gu bheil suidse cumhachd an inverter san t-suidheachadh OFF.
- Connect the red (positive) battery cables to the positive (+) terminal on the inverter and the positive (+) terminal on your 12V DC battery.
- Connect the black (negative) battery cables to the negative (-) terminal on the inverter and the negative (-) terminal on your 12V DC battery.
- Connect the green ground wire to the ground terminal on the inverter and to a suitable ground point (e.g., vehicle chassis or earth ground).
- Ensure all connections are tight and secure to minimize resistance and prevent overheating.

Image: Proper connection of the POTEK 5000W Power Inverter to a 12V DC battery with red (positive), black (negative), and green (ground) cables.
A tight connection between the ring terminal of the input cable and the battery terminal creates a larger contact area, which significantly reduces resistance, leading to lower operating temperatures and enhanced safety.
A' cur suas
The inverter features mounting tabs on its corners, allowing it to be securely fastened to a flat surface in a vehicle, trailer, or other suitable location. Ensure the mounting location provides adequate ventilation and is protected from direct sunlight and moisture.
Stiùireadh Obrachaidh
A' tionndadh air/dheth
- After all connections are secure, switch the inverter's power button to the ON position. A green indicator light will illuminate, confirming the inverter is active.
- To turn off, switch the power button to the OFF position.
Innealan ceangail
- Cuir na h-innealan agad le cumhachd AC a-steach do na socaidean AC 110V.
- Plug your USB-powered devices into the 5V/2A USB ports.
- Dèan cinnteach gu bheil an wat iomlantage of all connected devices does not exceed the inverter's continuous power rating of 5000W.
Neach-leantainn fuarachaidh tuigseach
The inverter is equipped with an intelligent cooling fan system. The fans will operate silently when the internal temperature is below 104℉ (40℃) and will increase speed as the temperature rises to maintain optimal operating conditions. This design helps conserve battery power during lighter loads.
Cumail suas
- Regularly check all cable connections for tightness and corrosion. Clean terminals as needed.
- Keep the inverter's ventilation openings clear of dust and debris to ensure efficient cooling.
- Stòraich an inverter ann an àite fionnar, tioram nuair nach eilear ga chleachdadh.
- If the inverter will not be used for an extended period, disconnect it from the battery.
Fuasgladh thrioblaidean
The POTEK 5000W Power Inverter includes multiple protection features to safeguard itself and your devices. If the inverter stops functioning, check for the following:

Image: Diagram illustrating the multiple safety protections of the POTEK 5000W Power Inverter, including low-voltage, thar-voltage, overload, short-circuit, and over-temperature protection.
- Dìon Overload: If the total power draw of connected devices exceeds 5000W (continuous) or 10000W (surge), the inverter will shut down. Reduce the load and restart the inverter.
- Dìon ro theth: If the internal temperature becomes too high, the inverter will shut down. Allow it to cool down in a well-ventilated area before restarting. Ensure cooling fans are not obstructed.
- Ìosal Voltage Dìon: Ma tha an cuir a-steach DC voltage drops too low (e.g., due to a depleted battery), the inverter will shut down to protect the battery. Recharge or replace the battery.
- Àrd Voltage Dìon: Ma tha an cuir a-steach DC voltage exceeds safe limits, the inverter will shut down. Verify the input voltage from your power source.
- Dìon cuairt ghoirid: In the event of a short circuit in the output, the inverter will shut down. Disconnect all devices, check for faults, and restart.
If the issue persists after checking these points, please contact customer service.
Sònrachaidhean
| Brand | POTEK |
| Modail | POTEK 5000W |
| Cumhachd leantainneach | 5000W |
| Cumhachd as àirde | 10000W |
| Input Voltage | 12.8-13.2V DC |
| Toradh Voltage | 110-125V AC |
| Tonn toraidh | Sine Wave atharraichte |
| Toradh USB | DC 5V/2A (2 ports) |
| Cuairtean AC | 4 |
| Cuideam nì | 22.5 not |
| Meudan toraidh | 18.7 x 10.4 x 4.6 òirleach |
Barantas agus Taic
POTEK offers customer service for their products. For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official POTEK weblàrach. Cùm do chuidhteas ceannach airson tagraidhean barantais.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.