Fluance RT81 Elite High Fidelity Vinyl Turntable Record Player User Manual

Ro-ràdh

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Fluance RT81 Elite High Fidelity Vinyl Turntable. Please read this manual thoroughly before using your turntable to ensure proper function and longevity.

The Fluance RT81 is designed to deliver a pure analog listening experience with premium components, including an Audio Technica AT95E cartridge, a belt-drive system, and a high-mass MDF wood plinth for superior vibration isolation.

Na tha air a ghabhail a-steach

Dèan cinnteach gu bheil a h-uile pàirt anns a’ phacaid:

• RT81 Turntable Unit
• Còmhdach Dust
• 45 Adaptor
• Brat-ùrlair rubair
• 3ft RCA Cable with Ground Wire
• 100V - 240V (50/60Hz) AC Power Adapter
• Stiùireadh tòiseachaidh luath
• Audio Technica AT95E Cartridge (pre-installed on headshell)
• Frith-chuideam
• Hinges (x2)
• Crios rubair

Image: All components included with the Fluance RT81 turntable, including the plinth, aluminum platter, platter mat, headshell & AT95E cartridge, dust cover, hinges, RCA cable, 45 adapter, counterweight, 5ft power adapter, and rubber belt.

Suidhich

1. Unpacking agus Suidheachadh

Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive vibration.

Image: The Fluance RT81 turntable in its walnut finish, with the clear dust cover open, showcasing the platter and tonearm.

2. Stàladh a’ Phlàta agus a’ Chrios

1. Place the aluminum platter onto the spindle.
2. Carefully loop the rubber belt around the motor pulley and the inner rim of the platter. Ensure the belt is not twisted.
3. Place the rubber platter mat on top of the aluminum platter.

Ìomhaigh: Sealladh dlùth view of the Fluance RT81 turntable's tonearm, highlighting the Audio Technica AT95E cartridge with its green stylus.

3. Suidheachadh Gàirdean-Tòna

The Audio Technica AT95E cartridge is pre-installed on the headshell. You will need to balance the tonearm and set the tracking force.

1. Ceangail an cuideam-aghaidh ri cùl a’ ghàirdean-tòna.
2. Adjust the counterweight until the tonearm is balanced and floats horizontally.
3. Set the tracking force to the recommended 2.0 grams by rotating the counterweight.
4. Set the anti-skating control to '2' to match the tracking force.

4. A’ ceangal ris an t-siostam claisneachd

The RT81 features a built-in Texas Instruments preamp, offering flexibility in connection options.

• Using Built-in Preamp: Set the PHONO/LINE switch on the back of the turntable to LINN. Connect the RCA cables from the turntable's AUDIO OUTPUT to any available line-level input (e.g., AUX, CD) on your amplifier or powered speakers. The ground wire is not needed in this configuration.
• Using External Preamp: Set the PHONO/LINE switch on the back of the turntable to Fòn. Connect the RCA cables from the turntable's AUDIO OUTPUT to the PHONO input on your external preamp or receiver. Connect the ground wire from the turntable's ground post to the ground terminal on your external preamp/ cuidhteas.

Image: Rear panel of the Fluance RT81 turntable, displaying the RCA audio output jacks, ground terminal, PHONO/LINE switch, AUTO STOP switch, and DC 12V power input.

5. Ceangal Cumhachd

Connect the AC power adapter to the DC 12V input on the back of the turntable, then plug it into a wall outlet.

Stiùireadh Obrachaidh

1. Seinn Clàr

1. Place a record on the platter mat. For 7-inch singles, use the included 45 adapter.
2. Select the appropriate speed (33 or 45 RPM) using the selector dial on the front left.
3. Tog suas a’ ghàirdean-tòin le bhith a’ cleachdadh luamhan a’ chiù.
4. Manually position the tonearm over the desired starting groove of the record.
5. Lower the tonearm slowly using the cueing lever. The record will begin to play.

2. Auto Stop Function

The RT81 features an auto-stop function. When enabled (AUTO STOP switch set to ON), the platter will automatically stop spinning once the tonearm reaches the end of the record. If disabled (AUTO STOP switch set to OFF), the platter will continue to spin until manually stopped.

3. Stad Playback

1. Tog suas a’ ghàirdean-tòin le bhith a’ cleachdadh luamhan a’ chiù.
2. Return the tonearm to its rest.
3. Turn the speed selector dial to "OFF" to stop the platter.

Cumail suas

1. Glanadh a’ Chlàir-thionndaidh

Regular cleaning will help maintain the performance and appearance of your RT81.

• Use a soft, dry cloth to wipe the plinth and dust cover. Avoid abrasive cleaners.
• Gently brush the stylus with a soft brush in a back-to-front motion to remove dust.
• Clean records regularly with a carbon fiber brush or record cleaning solution to prevent dust buildup and improve sound quality.

2. Ath-chur Crios

The drive belt may need replacement over time due to wear. Refer to the "What's Included" section for the location of the belt and instructions for re-installation.

Fuasgladh thrioblaidean

Sònrachaidhean

• Modail: RT81 Elite
• Brand: Sruthan
• Meudan (L x W x H): 13.75 x 16.5 x 5.5 òirleach
• Cuideam nì: 14.1 not
• Plinth Material: Coille MDF
• Platter: Aluminium
• Cartridge: Audio Technica AT95E (Elliptical Stylus)
• Siostam Drive: Slighe crios
• Luas: 33 1/3, 45 RPM
• Ro-làimhamp: Built-in Texas Instruments Preamp (switchable PHONO/LINE)
• Ceangal: Wired RCA Output with Ground Terminal
• Stad fèin-ghluasadach: Yes (switchable ON/OFF)
• Dath: Walnut

Ìomhaigh: Os cionn view of the Fluance RT81 turntable with a record spinning, demonstrating its operational state.

Barantas & Taic

Your Fluance RT81 turntable comes with a Barantas an Neach-dèanamh 2 Bliadhna. For warranty claims or technical support, please contact Fluance customer service directly.

Taic Luchd-cleachdaidh Fad-beatha is also provided by Fluance to assist with any questions or issues you may encounter with your turntable.

For additional resources, including detailed setup videos and FAQs, please visit the official Fluance website or refer to the included Quick Start Guide.

Image: The Fluance company logo, "FLUANCE. Serious Performance."