Ro-ràdh
This manual provides essential information for the safe and efficient operation of your Whynter UIM-502SS Built-in Ice Maker Machine. Please read all instructions carefully before installation and use to ensure proper function and longevity of the appliance. Keep this manual for future reference.

Image: Whynter UIM-502SS Ice Maker with an ice scoop, water hoses, and an inline water filter.
Fiosrachadh Sàbhailteachd
Gus an cunnart bho theine, clisgeadh dealain no leòn a lughdachadh nuair a bhios tu a’ cleachdadh an inneal agad, lean na ceumannan bunaiteach seo:
- Leugh a h-uile stiùireadh mus cleachd thu an inneal.
- Na bean ri uachdaran fuar le uisge fliuch no tioram.amp hands. Skin may stick to these extremely cold surfaces.
- Na glan a-riamh pàirtean inneal le lionntan lasanta. Faodaidh ceò a bhith na chunnart teine no spreadhadh.
- Na stòraich no na cleachd gasoline no bhalbhaichean lasanta agus lioftaichean faisg air an inneal seo no inneal sam bith eile.
- Before performing any maintenance or cleaning, ensure the appliance is unplugged from the power outlet.
- Chan eilear an dùil an inneal seo a chleachdadh le daoine (a’ toirt a-steach clann) le comasan corporra, mothachaidh no inntinn nas lugha, no dìth eòlas agus eòlas, mura d’ fhuair iad stiùireadh no stiùireadh a thaobh cleachdadh an inneil le neach le uallach airson an sàbhailteachd.
- Bu chòir clann a bhith fo stiùir gus dèanamh cinnteach nach cluich iad leis an inneal.
Suidhich
A' dì-phapadh
Carefully remove all packaging materials. Retain the packaging for potential future transport of the appliance. Ensure all components listed in the 'What's in the Box' section are present.
Suidheachadh
The Whynter UIM-502SS is designed for both freestanding and built-in installation. Ensure adequate ventilation around the unit, especially for the front-venting design. Maintain proper clearances as specified in the dimensions below.

Image: The Whynter UIM-502SS ice maker showing its dimensions: 32.8" H, 14.6" W, 23.6" D (add 2" for handle).
The unit should be placed on a level, stable surface capable of supporting its weight when full of ice and water. Avoid direct sunlight or heat sources.
Ceangal uisge
This ice maker requires a direct water connection. It is strongly recommended that a licensed plumber perform the water supply connection to prevent leaks or damage. The unit includes an NSF-certified inline water filter to ensure clean water for ice production. Install the filter according to the separate filter instructions.
Drèanadh
The unit features a built-in gravity drain system to effectively remove melted ice and excess water. Ensure the drain hose is properly connected and routed to a suitable drain point, following local plumbing codes.

Ìomhaigh: Cùl view of the ice maker, highlighting the water inlet and drain hose connections.
Ceangal dealain
Connect the appliance to a dedicated, grounded 120V/60Hz electrical outlet. Do not use extension cords or adapter plugs.
Glanadh tùsail
Before first use, clean the interior of the ice maker and the ice bin with a mild detergent and warm water. Rinse thoroughly and dry.
Stiùireadh Obrachaidh
Pannal Smachd
The control panel is located on the front of the unit, featuring a simple one-switch operation for ICE, OFF, and WASH modes.

Ìomhaigh: Sealladh dlùth view of the ice maker's control panel, showing the 'ICE', 'OFF', and 'WASH' switch.
A ’dèanamh deigh
To begin ice production, set the switch to 'ICE'. The unit will automatically start the ice-making cycle. Water is recirculated, and minerals are removed as clean water freezes to the ice grid, producing clear ice cubes. The unit can produce up to 80 lbs of ice in 24 hours.
Stòradh deigh
The ice maker has a storage capacity of up to 25 lbs. The ice bin is designed to hold the produced ice. Use the provided ice scoop to retrieve ice.

Image: The ice maker with its door open, revealing the internal ice storage bin.
Cumail suas
Glanadh
Regular cleaning is crucial for optimal performance and hygiene. The unit features a 'WASH' mode for automated cleaning. Refer to the detailed cleaning instructions in the full manual for specific steps on descaling and sanitizing the unit. Always unplug the unit before manual cleaning.
Ath-nuadhachadh sìoltachan uisge
The inline water filter should be replaced periodically, typically every 6 months or as indicated by water quality and usage, to maintain optimal ice quality and prevent mineral buildup. Consult the filter's specific instructions for replacement procedures.
Fuasgladh thrioblaidean
If the ice maker is not functioning correctly, review the following common issues before contacting support:
- Gun Riochdachadh Deighe: Check power connection, water supply, and ensure the unit is in 'ICE' mode.
- Poor Ice Quality: Ensure the water filter is not clogged and is replaced regularly. Perform a cleaning cycle.
- Uisge ag aoidion: Verify all water connections and drain hose are securely fastened.
- Fuaim neo-àbhaisteach: Some operational noise is normal. Excessive or new noises may indicate an issue; consult the full manual or support.
For more detailed troubleshooting steps, refer to the comprehensive troubleshooting guide in the complete product manual.
Sònrachaidhean
| Feart | Sònrachadh |
|---|---|
| Brand | Whynter |
| Ainm Modail | Built-In/ Freestanding Ice Maker - 80lb capacity Clear Ice Cube |
| Modail Àireamh | UIM-502SS |
| Meudan toraidh (D x W x H) | 23.6" x 14.6" x 32.8" |
| Comas cinneasachaidh deigh | 80 lbs gach 24 uair |
| Comas stòraidh deigh | 25 lb |
| Dètage | 1000 watt |
| Voltage | 120 Volt |
| Stuth | Stàilinn nach meirg |
| Seòrsa stàlaidh | Neo-eisimeileach / Togte a-steach |
| Co-phàirtean air an toirt a-steach | Ice Maker, Ice Scoop, Water Hose, Drain Hose |
Fiosrachadh Barantais
This Whynter appliance is warranted against defects in materials and workmanship for a period of one year from the date of original purchase. For full warranty terms and conditions, please refer to the warranty card included with your product or visit the official Whynter weblàrach.
Taic Luchd-cleachdaidh
For technical assistance, troubleshooting, or to order replacement parts, please contact Whynter Customer Support. Contact information can be found on the official Whynter website or on your product's warranty card.