Crosley C200 Direct-Drive Turntable Instruction Manual

Ro-ràdh

This manual provides detailed instructions for the setup, operation, and maintenance of your Crosley C200 Direct-Drive Turntable. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Stiùireadh sàbhailteachd cudromach

• Leugh a h-uile stiùireadh mus cleachd thu.
• Cùm an leabhran seo airson iomradh san àm ri teachd.
• Na cleachd an inneal seo faisg air uisge.
• Glan a-mhàin le clò tioram.
• Na cuir bacadh air fosglaidhean fionnarachaidh sam bith. Stàlaich a rèir stiùiridhean an neach-dèanamh.
• Na cuir a-steach faisg air stòran teas sam bith leithid rèididheatoran, clàran teas, stòbhaichean, no uidheam eile (a 'gabhail a-steach ampliifiers) a bheir teas.
• Dìon an sreang cumhachd bho bhith air a choiseachd air no air a phronnadh, gu sònraichte aig plugaichean, gabhadan goireasachd, agus an àite far am fàg iad bhon inneal.
• Na cleachd ach ceanglachan / goireasan a chaidh a shònrachadh leis an neach-dèanamh.
• Na cuir a-steach an inneal seo aig àm stoirmean dealanach no nuair nach eilear ga chleachdadh airson ùine mhòr.
• Thoir iomradh air a h-uile seirbheis gu luchd-seirbheis le teisteanas. Tha feum air seirbheiseachadh nuair a tha an inneal air a mhilleadh ann an dòigh sam bith, leithid sreang solarachaidh cumhachd no pluga air a mhilleadh, leaghan air a dhòrtadh no nithean air tuiteam a-steach don inneal, tha an inneal air a bhith fosgailte do uisge no taiseachd, chan eil e ag obair gu h-àbhaisteach , no air a chuir sìos.

Susbaint pacaid

Dèan cinnteach gu bheil na nithean gu lèir a tha air an liostadh gu h-ìosal air an toirt a-steach don phacaid agad:

• Crosley C200 Direct Drive Turntable
• Leabhar-làimhe cleachdaiche (an sgrìobhainn seo)
• Còmhdach Dust
• Plata le crios dràibhidh
• Felt Slip Mat
• Frith-chuideam
• Head Shell with Audio-Technica Magnetic Cartridge
• Adaptair 45 RPM
• RCA Output Cables

Com-pàirtean thairisview

Familiarize yourself with the main components of your turntable.

Suidhich

1. Stàladh Platter and Drive Belt

1. Carefully place the platter onto the center spindle.
2. Locate the drive belt, which is pre-installed on the underside of the platter.
3. Using the red ribbon attached to the drive belt, gently pull the belt over the motor pulley. Ensure the belt is not twisted.
4. Remove the red ribbon.
5. Cuir am mata sleamhnachaidh feilte air mullach a’ phlàta.

2. Tone Arm Assembly and Balancing

1. Stàlaich cuideam-aghaidh: Slide the counterweight onto the rear of the tone arm with the numbers facing forward.
2. Attach Head Shell: Carefully attach the head shell (with the Audio-Technica cartridge) to the end of the tone arm. Turn the locking nut until it is firmly in place.
3. Thoir air falbh dìonadair an stoidhle: Gently remove the clear plastic stylus protector from the cartridge.
4. Unlock Tone Arm: Release the tone arm from its rest using the tone arm lock.
5. Gàirdean Tòna Cothromachaidh: Adjust the counterweight by rotating it until the tone arm floats parallel to the platter without touching it. The tone arm should be level.
6. Suidhich Feachd Tracadh: Once balanced, hold the counterweight steady and rotate only the numbered ring to '0' on the center line. Then, rotate the entire counterweight counter-clockwise until the number '2' aligns with the center line. This sets the tracking force to 2 grams, which is optimal for the included cartridge.
7. Suidhich an-aghaidh sgèitidh: Locate the anti-skating dial near the tone arm base. Set this dial to '2' to match the tracking force.
8. Lock Tone Arm: Return the tone arm to its rest and secure it with the tone arm lock.

3. A’ ceangal ris an t-siostam claisneachd

1. Connect the RCA output cables from the turntable to your ampluchd-labhairt no luchd-labhairt cumhachd.
2. Use the PHONO/LINE switch on the rear of the turntable to select the appropriate output:
   • PHONO: Cleachd ma tha thu ampTha cuir-a-steach phono sònraichte aig an lifier.
   • IDLY: Cleachd ma tha thu amplifier has a standard auxiliary input or if connecting to powered speakers. The turntable's built-in pre-amplifier will be active.
3. Connect the power adapter to the turntable and then to a wall outlet.

Stiùireadh Obrachaidh

1. Seinn Clàr

1. Place a record on the platter. If playing a 45 RPM single, use the included 45 RPM adapter.
2. Tagh an astar ceart (33 1/3 no 45 RPM) a’ cleachdadh suidse taghaidh na h-astar.
3. Fuasgail gàirdean an tòna bhon àite fois aige.
4. Tog luamhan a’ chiù gus gàirdean an tòine a thogail.
5. Manually position the tone arm over the desired starting groove of the record.
6. Gently lower the cueing lever to allow the stylus to descend onto the record.
7. To stop playback, lift the cueing lever, return the tone arm to its rest, and lock it.

2. Bluetooth Connectivity (Built-In Receiver)

The Crosley C200 features a built-in Bluetooth receiver, allowing you to stream audio from a Bluetooth-enabled device to the turntable's output. This means you can use the turntable as a Bluetooth speaker for your phone or tablet.

1. Dèan cinnteach gu bheil cumhachd aig a’ chlàr-tionndaidh.
2. Activate Bluetooth pairing mode on your external device (e.g., smartphone, tablet).
3. Lorg airson "Crosley C200" in your device's Bluetooth settings and select it to pair.
4. Once paired, audio from your device will play through the turntable's connected speakers/amplosgadair.

Thoir an aire: The Bluetooth feature is for receiving audio gu the turntable, not for transmitting audio bho the turntable to Bluetooth speakers.

Cumail suas

1. Glanadh an Steilus

• Use a soft brush designed for stylus cleaning.
• Brush gently from back to front (in the direction of the stylus's movement across the record).
• Do not brush from side to side, as this can damage the stylus.

2. Glanadh a’ Chlàir-thionndaidh

• Wipe the dust cover and turntable cabinet with a soft, dry cloth.
• Seachain a bhith a 'cleachdadh cheimigean cruaidh no innealan-glanaidh sgudail.

3. Replacing the Stylus

The stylus should be replaced after approximately 300-500 hours of playback. Refer to the Audio-Technica cartridge manual for specific replacement instructions or consult a qualified technician.

Fuasgladh thrioblaidean

Sònrachaidhean

• Modail: C200A-BK
• Brand: Crosley
• Seòrsa Drive: Drive Direct
• Motor: Àrd-torque
• Luas: 33 1/3, 45 RPM
• Obrachadh: Làn-làimhe
• Gàirdean Tòna: Balanced S-Shaped with hydraulic lift control, anti-skate, height adjustment, and lockable rest
• Cartridge: Audio-Technica Magnetic Cartridge
• Ro-amplosgadair: Built-in switchable phono pre-amplosgadair
• Toraidhean: Detachable RCA output cables
• Platter: Damped die-cast aluminum with felt slip mat
• Feart sònraichte: Glacadair Bluetooth togte
• Stuth: Aluminum (platter), Black finish
• Meudan toraidh: 11.02 x 17.72 x 5.47 òirleach
• Cuideam nì: 11.02 not
• Innealan co-fhreagarrach: Labhraiche, Ampliifier, AV Receiver

Barantas agus Taic

For warranty information, please refer to the documentation included with your purchase or visit the official Crosley website. For technical support or service inquiries, please contact Crosley customer service.

Dèanadair: Crosley

Ceann-latha ri fhaighinn an toiseach: Dùbhlachd 22, 2015

Bhideothan Bathar Oifigeil