Legrand 067001 Céliane VMC Switch Instruction Manual

1. Ro-ràdh

This instruction manual provides essential information for the safe installation, operation, and maintenance of the Legrand 067001 Céliane VMC Switch. This device is designed for controlling Ventilation Mécanique Contrôlée (VMC) systems, operating at 230V with a 10AX current rating.

2. Fiosrachadh Sàbhailteachd

WARNING: Risk of electric shock. Installation and maintenance should only be performed by a qualified electrician in accordance with national and local electrical codes.

• Always disconnect power at the main circuit breaker before installing or servicing the switch.
• Dèan cinnteach gu bheil na ceanglaichean uile tèarainte agus air an insaladh gu ceart.
• Do not operate the switch with wet hands or in damp cumhachan.
• This product is designed for indoor use only (IP20 rating).
• Na bi nas àirde na an tomhas ainmichtetage (230V) or current (10A) ratings.

3. Pasgan-susbaint

• 1 x Legrand 067001 Céliane VMC Switch Module

Note: Faceplate and mounting frame are typically sold separately and are required for complete installation.

4. Setup agus Stàladh

The Legrand 067001 switch is designed for wall or surface mounting. Proper installation is crucial for safety and functionality.

1. Dì-cheangal cumhachd: Before beginning any installation, ensure the main power supply to the circuit is turned off at the circuit breaker. Verify with a voltage deuchainniche.
2. Stàladh: Install the switch module into a compatible mounting box or frame (not included). This switch supports wall or surface mounting configurations.
3. Ceanglaichean uèiridh:
   • Identify the Line (L) and Neutral (N) wires from your electrical supply.
   • Connect the electrical wires to the corresponding terminals on the switch module. The connection type is crimping. Ensure a secure and tight connection for each wire.
   • Refer to the wiring diagram provided with your VMC system or consult a qualified electrician for specific connection requirements.
4. Dèan cinnteach gu bheil am Mòdal tèarainte: Once wired, secure the switch module within its mounting frame or box.
5. Stàlaich Faceplate: Attach the decorative faceplate (not included) over the switch module.
6. Thoir air ais cumhachd: Once installation is complete and all components are securely in place, restore power at the main circuit breaker.

Image: Legrand 067001 Céliane VMC Switch module. This image displays the grey plastic housing, the internal mechanism, and the terminals for electrical connections, including 'N' for Neutral and 'L' for Line, indicating its wiring points.

5. Stiùireadh Obrachaidh

The Legrand 067001 is a push-button type switch with an ON-OFF operating mode, designed for controlling VMC systems. It features a call button with a luminous indicator.

• A' tionndadh air/dheth: Press the push-button to toggle the connected VMC system between ON and OFF states.
• Luminous Indicator: The integrated luminous indicator provides visual feedback on the switch's status or can be used as a call button depending on the specific VMC system configuration.

6. Cumail suas

The Legrand 067001 VMC Switch requires minimal maintenance.

• Glanadh: To clean the switch, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the switch or create an electrical hazard.
• Sgrùdadh: Dèan sgrùdadh bho àm gu àm air an suidse airson comharran milleadh, ceanglaichean sgaoilte, no dath mì-chothromach. Ma chì thu cùisean sam bith, dì-cheangail an cumhachd agus bruidhinn ri dealanach teisteanasach.

7. A ’dèanamh trioblaid

If the switch or connected VMC system is not functioning correctly, consider the following:

• Gun chumhachd: Check if the circuit breaker for the switch is tripped. Reset if necessary.
• Suidse gun fhreagairt: Ensure all wiring connections are secure. Loose connections can prevent proper operation.
• Luminous Indicator Not Working: Verify the wiring for the indicator light is correctly connected according to your VMC system's specifications.
• Cùisean Seasmhach: If troubleshooting steps do not resolve the issue, disconnect power and contact a qualified electrician for further assistance. Do not attempt repairs yourself.

8. Sònrachaidhean

9. Barantas agus Taic

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Legrand customer service directly. Warranty terms may vary based on region and retailer.

You can find more information on the official Legrand weblàrach: www.legrand.com