Kestrel 0830ORA

Kestrel 3000 Pocket Weather Meter / Heat Stress Monitor

Brand: Kestrel | Modail: 0830ORA

1. Ro-ràdh

The Kestrel 3000 Pocket Weather Meter is a rugged, handheld device designed for accurate environmental measurements. It provides essential data for various applications, including outdoor activities, agriculture, and research. This meter is built to withstand harsh conditions, being waterproof (IP-67), floatable, and drop-tested to military standards (MIL-STD-810G).

It measures a comprehensive range of environmental parameters, including heat stress index, relative humidity, dew point temperature, wind chill, air/water/snow temperature, and current/average/maximum wind speeds, all displayed on a clear LCD.

2. Dè tha sa bhogsa

  • Meatair Aimsir pòcaid Kestrel 3000
  • Amhach Lanyard
  • Protective Slip-on Cover
  • CR2032 Lithium Coin Cell Battery (pre-installed or separate)
  • Teisteanas Co-chòrdaidh
Kestrel 3000 Pocket Weather Meter, front view

Figear 2.1: Aghaidh view of the Kestrel 3000 Pocket Weather Meter.

3. Suidhich

3.1. Stàladh bataraidh

The Kestrel 3000 requires one CR2032 Lithium Metal battery. The battery compartment is located on the back of the unit.

  1. Lorg còmhdach a’ bhataraidh air cùl an inneil.
  2. Using a small coin or screwdriver, turn the battery cover counter-clockwise to unlock it.
  3. Remove the old battery (if applicable) and insert a new CR2032 battery with the positive (+) side facing up.
  4. Replace the battery cover and turn it clockwise to secure and seal the compartment. Ensure it is tightly sealed to maintain waterproof integrity.
Air ais view of Kestrel 3000 showing battery compartment

Figear 3.1: Cùl view of the Kestrel 3000, highlighting the battery compartment.

4. Stiùireadh Obrachaidh

4.1. Cumhachd air / dheth

  • To turn on: Press the center button (power/mode button).
  • To turn off: Press and hold the center button for approximately 3 seconds until the display turns off. The unit will also automatically power off after a period of inactivity to conserve battery.

4.2. Modhan Seòlaidh

Use the left and right arrow buttons to cycle through the different measurement modes. The Kestrel 3000 offers the following modes:

  • Luas na Gaoithe: Current, Average, and Maximum wind speed (displayed in mph, km/h, knots, m/s, or ft/min).
  • Teòthachd: Air, Water, and Snow temperature (displayed in °F or °C).
  • Chill gaoithe: Calculated wind chill temperature.
  • Taiseachd coimeasach: Sa cheudtage de taiseachd coimeasach.
  • Heat Stress Index: Calculated heat stress index.
  • Rubha drùchd: Calculated dew point temperature.

To reset average/max values in wind speed mode, press and hold the center button while in the respective mode.

Kestrel 3000 held in hand, showing display

Figure 4.1: The Kestrel 3000 in use, demonstrating its compact size and clear display.

5. Cumail suas

5.1. Glanadh

Clean the Kestrel 3000 with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the impeller area is free from debris for accurate wind speed readings.

5.2. Impeller Replacement

The Kestrel 3000 features a large, replaceable impeller. If the impeller becomes damaged or worn, it can be easily replaced to maintain accuracy. Refer to the official Kestrel website or contact support for replacement parts and instructions.

5.3. Stòradh

When not in use, store the Kestrel 3000 in its protective slip-on cover in a cool, dry place. For long-term storage, it is recommended to remove the battery to prevent leakage.

Kestrel 3000 with its protective slip-on cover

Figure 5.1: The Kestrel 3000 with its protective cover, ideal for storage and transport.

6. A ’dèanamh trioblaid

Trioblaid Adhbhar a dh’fhaodadh a bhith ann Fuasgladh
Tha an taisbeanadh bàn no dorcha. Bataraidh ìosal no marbh. Replace the CR2032 battery. Ensure it is inserted correctly.
Leughaidhean astar gaoithe mì-chruinn. Impeller air a bhacadh no air a mhilleadh. Check the impeller for debris. If damaged, replace the impeller.
Inaccurate humidity/temperature readings. Sensor obstructed or needs time to acclimate. Ensure the sensor area is clear. Allow the unit to acclimate to the environment for a few minutes.
Chan eil an aonad a’ freagairt ri brùthadh phutanan. Unit frozen or battery issue. Remove and reinsert the battery to perform a soft reset. If problem persists, replace battery.

7. Sònrachaidhean

Feart Mion-fhiosrachadh
Modail Àireamh 0830ORA
Meudan toraidh 1.89 x 0.43 x 0.75 òirleach
Cuideam 3.6 unnsa
Stòr cumhachd 1 x CR2032 Lithium Metal Battery
Ìre dìon-uisge IP-67 (submersible to 1 meter for 30 minutes)
Inbhe Deuchainn Boinne MIL-STD-810G
Tomhais Wind Speed (Current/Avg/Max), Temperature, Wind Chill, Relative Humidity, Heat Stress Index, Dew Point
Taisbeanadh Large, Clear LCD
Dùthaich Tùs Na Stàitean Aonaichte

8. Barantas agus Taic

The Kestrel 3000 Pocket Weather Meter is manufactured by Kestrel (Nielsen-Kellerman Company). For specific warranty information, product support, or to purchase replacement parts, please refer to the official Kestrel Instruments weblàrach-lìn no cuir fios chun t-seirbheis teachdaiche aca gu dìreach.

Goireasan air-loidhne:

© 2024 Kestrel Instruments. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.