Modway Jive Ribbed Armless Mid Back Swivel Conference Chair

Ro-ràdh

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Modway Jive Ribbed Armless Mid Back Swivel Conference Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety. Keep this manual for future reference.

Image 1: Modway Jive Ribbed Armless Mid Back Swivel Conference Chair, Tan color variant.

Fiosrachadh Sàbhailteachd

Lean na ceumannan sàbhailteachd a leanas gus casg a chur air dochann no milleadh air an toradh:

• Na seas air a’ chathair.
• Na cleachd a’ chathair ma tha pàirtean sam bith a dhìth, millte no caite.
• Dèan cinnteach gu bheil na boltaichean is na sgriothan uile air an teannachadh gu tèarainte mus cleachd thu iad. Thoir sùil orra bho àm gu àm agus teannaich a-rithist ma tha sin riatanach.
• Na gabh thairis air a’ chuideam as àirde de 331 not (150 kg).
• Cùm làmhan is corragan air falbh bho phàirtean gluasadach rè an atharrachaidh.
• Cleachd a’ chathair air uachdar rèidh gus casg a chur air tuiteam.

Susbaint pacaid

Dèan cinnteach gu bheil na pàirtean uile an làthair mus tòisich thu air an cruinneachadh:

• Seat and Backrest Assembly (1)
• Bun-stèidh (1)
• Sorcadair Togail Gas (1)
• Luchd-losgaidh (5)
• Assembly Manual (1)

Suidheachadh agus Seanadh

Assembly is straightforward and typically requires no tools. Follow these steps:

1. Ceangail na cuibhlichean ris a’ bhunait: Cuir gach aon de na còig cuibhlichean a-steach do na tuill aig ceann gach cas de bhonn na cathrach. Brùth gu daingeann gus an cliog iad nan àite.
   

   Image 2: Casters being inserted into the chair base.

2. Cuir an inneal-togail gas a-steach don bhunait: Place the gas lift cylinder into the center hole of the assembled base. Ensure it sits securely.
   

   Image 3: Gas lift cylinder placed into the chair base.

3. Ceangail an suidheachan ris an àrdaichear gas: Carefully align the center hole of the seat and backrest assembly with the top of the gas lift cylinder. Lower the seat onto the gas lift, applying gentle pressure until it is seated firmly.

Stiùireadh Obrachaidh

Your Modway Jive chair features adjustable functions for personalized comfort:

• Atharrachadh àirde: To raise the seat, lift the lever located under the right side of the seat while standing. To lower the seat, lift the lever while seated. Release the lever at the desired height.
  

  Image 4: Height adjustment lever.

• Glasadh Teilt agus Teannas: The chair features a tilt mechanism. To lock the chair in an upright position, push the lever inwards. To unlock and allow tilting, pull the lever outwards. The tension knob, usually located under the front of the seat, can be rotated to adjust the resistance of the tilt mechanism. Turn clockwise to increase tension (stiffer tilt) and counter-clockwise to decrease tension (looser tilt).

Cumail suas

Bidh cumail suas cunbhalach a’ cuideachadh le bhith a’ leudachadh beatha agus coltas do chathair:

• Glanadh: Sguab glan le sanasamp cloth. For stubborn stains on the vinyl upholstery, use a mild soap solution and wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Sgrùdadh: Periodically check all connections and moving parts. Re-tighten any loose screws or bolts.
• Casters: Cùm na cuibhlichean saor bho sprùilleach (falt, duslach) gus dèanamh cinnteach gu bheil iad a’ gluasad gu rèidh.

Fuasgladh thrioblaidean

Ma thachras tu ri duilgheadasan leis a’ chathair agad, thoir sùil air na duilgheadasan agus na fuasglaidhean cumanta a leanas:

• Chair will not adjust height: Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may be faulty and require replacement.
• Tha a’ chathair mì-chinnteach: Check that all casters are fully inserted into the base and that the seat is securely attached to the gas lift. Verify that the base is not damaged.
• Chan eil na cuibhlichean a’ roiligeadh gu rèidh: Inspect casters for trapped debris (hair, lint) and clean as necessary. Ensure the chair is used on an appropriate surface.
• Chair tilts too easily or not enough: Adjust the tilt tension knob located under the seat.

Sònrachaidhean

Barantas

This Modway Jive chair is covered by a one-year warranty against manufacturer defects. Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from misuse, abuse, accident, or unauthorized modifications.

Taic

For further assistance, missing parts, or warranty inquiries, please contact Modway customer support. Refer to the original packaging or Modway's official weblàrach-lìn airson fiosrachadh conaltraidh gnàthach.

Weblàrach: www.modway.com