TFA-Dostmann Bingo Radio-Controlled Alarm Clock

Ro-ràdh

The TFA-Dostmann Bingo Radio-Controlled Alarm Clock (Model 60.2528.02) is designed for intuitive and easy use. It features a clear display, silent operation, and an automatic LED backlight for visibility at night. The alarm function offers a gentle wake-up with a gradual increase in intensity. Two distinct alarm times can be set simultaneously using dedicated side switches, with a color indicator showing activation status. This alarm clock also displays the day of the week, date, and ambient room temperature, helping to maintain an optimal sleeping environment (ideally between 16°C and 18°C).

Figear 1: Aghaidh view of the alarm clock showing the display and control buttons.

Suidhich

1. Stàladh bataraidh

The alarm clock requires 2 AA batteries (included). To install or replace batteries:

1. Lorg còmhdach roinn a’ bhataraidh air cùl an aonaid.
2. Slaod an còmhdach fosgailte.
3. Cuir a-steach 2 bataraidh AA, a’ dèanamh cinnteach à polarity ceart (+/-).
4. Dùin an còmhdach roinn bataraidh gu tèarainte.

Figear 2: Cùl view le roinn bataraidh agus smachdan.

2. Initial Power-On and Radio Control Synchronization

Upon battery installation, the clock will automatically attempt to synchronize with the radio-controlled time signal. This process may take several minutes. Ensure the clock is placed away from electronic interference for optimal reception.

• The radio signal icon on the display will flash during synchronization.
• Once synchronized, the icon will become solid, and the correct time, date, and day of the week will be displayed.
• If synchronization fails, the clock will operate as a standard quartz clock. You can manually set the time (see 'Setting Time Manually').

Stiùireadh Obrachaidh

1. Setting Time Manually (if radio control is unavailable)

If the radio-controlled time signal is not received, you can set the time manually:

1. Brùth agus cùm an SET button on the back of the clock until the hour digits flash.
2. Cleachd an + or - buttons on the front to adjust the hour.
3. Brùth SET a-rithist gus an uair a dhearbhadh agus gluasad gu mionaidean.
4. Cleachd an + or - putanan gus na geàrr-chunntasan atharrachadh.
5. Lean air adhart a 'bruthadh SET to cycle through and adjust year, month, day, and 12/24-hour format as needed.
6. Brùth SET one last time or wait a few seconds for the settings to save.

2. A’ suidheachadh innealan-rabhaidh (Alarm 1 agus Alarm 2)

Tha dà inneal-rabhaidh neo-eisimeileach aig a’ ghleoc.

1. Brùth an SET 1 putan (airson Alarm 1) no SET 2 button (for Alarm 2) on the front. The alarm time will appear on the display.
2. While the alarm time is displayed, press and hold the respective SET putan gus am bi na h-àireamhan uair a’ priobadh.
3. Cleachd an + or - putanan gus an uair rabhaidh atharrachadh.
4. Brùth air a’ phutan iomchaidh SET putan a-rithist gus an uair a dhearbhadh agus gluasad gu mionaidean.
5. Cleachd an + or - putanan gus mionaidean an rabhaidh atharrachadh.
6. Brùth air a’ phutan iomchaidh SET button one last time or wait a few seconds to save the alarm time.

3. A’ cur innealan-rabhaidh an gnìomh/dì-ghnìomhachadh

Use the slider switches on the side of the clock to activate or deactivate each alarm.

• Slide the switch for Alarm 1 (bell icon with '1') to ON to activate. A color indicator will show it's active.
• Slide the switch for Alarm 2 (bell icon with '2') to ON to activate. A color indicator will show it's active.
• Sleamhnachadh an tionndadh gu AIRSON gus an inneal-rabhaidh a chuir dheth.

Figear 3: Taobh view showing alarm activation switch.

4. Gnìomh Snooze

Nuair a chluinneas tu inneal-rabhaidh, brùth air a’ phutan mhòr SNOOZE & LIGHT button on top of the clock to activate the snooze function. The alarm will pause for approximately 5 minutes and then sound again. This can be repeated multiple times.

5. Automatic Backlight

The clock features an automatic LED backlight for easy viewing ann an suidheachaidhean aotrom ìosal.

• Lorg an SOLAS AUTO tionndadh air cùl a’ chloca.
• Sleamhnachadh an tionndadh gu ON to enable the automatic backlight. A light sensor will detect ambient light levels and illuminate the display discreetly in the dark.
• Sleamhnachadh an tionndadh gu AIRSON to disable the automatic backlight.

Figure 4: Display with automatic backlight in a dark environment.

6. Taisbeanadh teothachd

The integrated thermometer continuously measures and displays the ambient room temperature. No special settings are required for this function.

Cumail suas

1. Glanadh

To clean the alarm clock, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these may damage the display or casing.

2. Ath-nuadhachadh bataraidh

Replace batteries when the display becomes dim or functions become erratic. Always replace both batteries at the same time with new AA batteries. Dispose of used batteries responsibly according to local regulations.

Fuasgladh thrioblaidean

• Gun taisbeanadh no taisbeanadh dorcha: Check battery polarity. Replace batteries if they are low.
• Radio control not synchronizing: Move the clock to a different location, away from electronic devices that may cause interference. Ensure it is not near metal objects. Manual time setting is an alternative.
• Alarm gun fhuaim: Ensure the alarm switch on the side is set to ON. Verify the alarm time is correctly set.
• Automatic backlight not working: Dèan cinnteach gu bheil an SOLAS AUTO switch on the back is set to ON. The backlight only activates in dark conditions.

Sònrachaidhean

Barantas agus Taic

TFA-Dostmann products are manufactured with quality and precision. For warranty information, please refer to the documentation included with your purchase or visit the official TFA-Dostmann website. For technical support or inquiries, please contact TFA-Dostmann customer service.

Ri fhaotainn phàirtean a bharrachd: 1 bliadhna.