MOOG MiniFooger Analog Delay Pedal: User Manual

1. Ro-ràdh

The MOOG MiniFooger Analog Delay is a high-quality effects pedal designed for guitar and bass, delivering over 650ms of rich, blooming analog delay. As part of the Minifooger family, this pedal embodies legendary Moog quality, tone, and versatility in a compact, rugged housing built for reliable performance.

This pedal features a 100% analog signal path, true bypass switching, and an extremely low-noise design, ensuring no negative impact on your instrument's tone. Its meticulous design incorporates premium components, a discrete JFET input stage, and a vintage compander circuit for superior delay tone. A dedicated expression input further expands the pedal's capabilities, allowing for dynamic control over key parameters.

2. Suidhich

Follow these steps to properly set up your MiniFooger Analog Delay pedal:

1. Ceangal cumhachd: Connect a 9V DC power supply (center negative) to the '+9V' jack on the rear of the pedal. The pedal can also be powered by a 9V battery (included), which can be accessed by removing the bottom plate.
2. Cuir a-steach claisneachd: Connect your instrument (guitar or bass) to the 'IN' jack on the rear of the pedal using a standard 1/4-inch instrument cable.
3. Toradh claisneachd: Connect the 'OUT' jack on the rear of the pedal to your ampan lifier no an ath pheadal anns an t-sreath chomharran agad a’ cleachdadh càball ionnstramaid àbhaisteach 1/4-òirleach.
4. Pedal Labhairt (Roghainneil): For dynamic control, connect a Moog EP-3 or similar expression pedal to the 'EXP' jack on the rear of the pedal.

3. Stiùireadh Obrachaidh

The MiniFooger Analog Delay features four primary control knobs and a footswitch for intuitive operation:

• TIME: This knob controls the delay time, ranging from very short slap-back echoes to over 650 milliseconds of rich, sustained delay.
• FIOSRACHADH: Adjusts the number of repeats. Turning this knob clockwise increases the number of echoes, allowing for long, decaying trails or even self-oscillation at higher settings.
• dràibheadh: This control adds a wide range of classic drive, boost, and color to your signal. It can be used to add warmth, grit, or a significant boost to the delayed signal.
• Measgachadh: Blends the dry (unaffected) signal with the wet (delayed) signal. Turn counter-clockwise for more dry signal, and clockwise for more wet signal. The mix control allows the dry signal to be completely eliminated if desired.
• tionndadh-coise: Engages or bypasses the delay effect. The MiniFooger Analog Delay features true bypass, ensuring your signal remains unaffected when the pedal is disengaged.

Expression Pedal Functionality

The expression pedal input allows for hands-free control over either the AM FEAR-CIUIL or FEAR-CIUIL parameter. By default, the expression pedal controls the delay AM FEAR-CIUIL. To switch the expression pedal's function to control FEAR-CIUIL, an internal switch needs to be adjusted.

To change Expression Pedal Control:

1. Ensure the pedal is disconnected from power and your instrument.
2. Carefully remove the screws from the bottom plate of the pedal.
3. Locate the small switch inside the pedal, typically labeled for expression control.
4. Toggle the switch to the desired position (TIME or FEEDBACK).
5. Carefully reattach the bottom plate and secure the screws.

Note: If you are uncomfortable performing this internal adjustment, please consult a qualified technician.

4. Cumail suas

To ensure the longevity and optimal performance of your MiniFooger Analog Delay pedal, follow these maintenance guidelines:

• Glanadh: Use a soft, dry cloth to clean the exterior of the pedal. Avoid using abrasive cleaners or solvents, as these can damage the finish and internal components.
• Stòradh: Store the pedal in a dry, temperate environment away from direct sunlight, extreme temperatures, and excessive humidity.
• Ath-nuadhachadh bataraidh: If using battery power, replace the 9V battery when the pedal's performance degrades or the indicator light dims. To replace, carefully remove the bottom plate, disconnect the old battery, and connect a new 9V battery, ensuring correct polarity.
• Ceanglaichean càball: Periodically check all cable connections for wear and tear. Loose or damaged cables can lead to signal loss or noise.

5. A ’dèanamh trioblaid

If you encounter issues with your MiniFooger Analog Delay, refer to the following troubleshooting tips:

• Gun fhuaim no comharra lag:
  • Dèan cinnteach gu bheil an solar cumhachd ceangailte gu ceart agus ag obair.
  • Thoir sùil air càbaill an ionnstramaid gu lèir airson ceangal ceart agus ionracas.
  • Dearbhaich gu bheil an inneal agad agus amptha an neach-gleidhidh ag obair gu ceart.
  • Check the 'MIX' knob setting; if set fully counter-clockwise, only the dry signal will pass.
• Unwanted Noise or Hum:
  • Dèan cinnteach gu bheil thu a’ cleachdadh solar cumhachd 9V DC riaghlaichte.
  • Thoir sùil airson càbaill no ceanglaichean lochtach.
  • Dèan deuchainn air a’ pheadal ann an socaid cumhachd eadar-dhealaichte no le solar cumhachd eadar-dhealaichte.
• Delay Not Functioning Correctly:
  • Check the 'TIME' and 'FEEDBACK' knob settings.
  • If using an expression pedal, ensure it is connected correctly and the internal switch is set to the desired parameter.

If these steps do not resolve the issue, please contact MOOG customer support for further assistance.

6. Sònrachaidhean

7. Barantas agus Taic

MOOG products are manufactured to high standards and come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official MOOG weblàrach.

For technical support, service, or any questions regarding your MiniFooger Analog Delay pedal, please contact MOOG customer support through their official weblàrach-lìn no am fiosrachadh conaltraidh a tha air a thoirt seachad ann am pasgan an toraidh agad.