Elektrobock PT32 GST Digital Room Thermostat with GSM Module User Manual

1. Ro-ràdh

Thank you for choosing the Elektrobock PT32 GST Digital Room Thermostat. This device is designed to provide precise and efficient control over your heating or cooling system, with the added convenience of remote management via GSM. This manual will guide you through the installation, setup, and operation of your new thermostat. Please read these instructions carefully before use and retain them for future reference.

2. Fiosrachadh Sàbhailteachd

• Installation should only be performed by a qualified electrician in accordance with local regulations.
• Always disconnect power to the heating/cooling system before installing or servicing the thermostat.
• Na cuir an inneal fo bhuaidh taiseachd, teòthachd anabarrach no solas dìreach na grèine.
• Ensure the power supply specifications match those required by the thermostat (5V DC, 2.5A).
• Cùm a-mach à ruigsinn chloinne.

3. Pasgan-susbaint

Dèan cinnteach gu bheil a h-uile nì an làthair sa phacaid agad:

• Elektrobock PT32 GST Digital Room Thermostat
• Power Adapter (5V DC, 2.5A, Jack type)
• Leabhar-làimhe cleachdaiche (an sgrìobhainn seo)
• Note: 2x AA 1.5V batteries for clock backup are not included and must be purchased separately.

4. Toradh thallview

The PT32 GST thermostat features a large, clear backlit display and intuitive controls. It is equipped with a GSM module for remote control via SMS messages.

4.1. Aghaidh View agus Meudan

Figear 1: Aghaidh view of the Elektrobock PT32 GST thermostat, showing the display, control dial, and buttons, along with its dimensions: 14 cm (width), 9 cm (height), and 3 cm (depth).

4.2. Cùl View agus Ceanglaichean

Figear 2: Cùl view of the Elektrobock PT32 GST thermostat, illustrating the mounting holes and terminal block for electrical connections.

4.3. Taobh View

Figear 3: Taobh deas view of the Elektrobock PT32 GST thermostat, highlighting its slim design and the external GSM antenna.

5. Setup agus Stàladh

5.1. A’ cur suas an teirmeastat

1. Choose an appropriate location on an interior wall, away from direct sunlight, drafts, and heat sources.
2. Ensure the mounting height is approximately 1.5 meters (5 feet) from the floor for optimal temperature sensing.
3. Use the mounting holes on the back of the thermostat (refer to Figure 2) to mark and drill holes in the wall.
4. Secure the thermostat base to the wall using appropriate screws and wall plugs.

5.2. Uèirleadh dealain

RABHADH: Disconnect power to your heating/cooling system at the main circuit breaker before proceeding with wiring.

1. Connect the thermostat to your heating/cooling system using the dry contact output terminals (max. 5A / 250V AC). Refer to your heating/cooling system's manual for specific wiring diagrams.
2. Connect the provided 5V DC, 2.5A power adapter to the thermostat's power input jack.
3. Insert 2x AA 1.5V batteries (not included) into the battery compartment for clock backup in case of power failure.
4. Once all connections are secure, restore power to the system.

5.3. Rèiteachadh Tòiseachaidh

1. Taghadh Cànain: Upon first power-up, the thermostat will prompt you to select a language (CZ / PL / EN / DE / RU / SVK). Use the control dial to navigate and confirm your choice.
2. Ceann-latha agus Uair: Set the current date and time. The device supports automatic summer/winter time changes.
3. GSM Module Setup: Insert a valid SIM card (not included) into the designated slot. Follow the on-screen instructions to configure the GSM module for remote SMS control.
4. Modh-obrachaidh: Select either heating or cooling mode depending on your system.

6. Stiùireadh Obrachaidh

6.1. Obrachadh Bunaiteach

• Taisbeanadh: The large backlit LCD shows the current temperature, time, date, operating mode, and GSM signal strength.
• Dial-smachd: Use the central dial to navigate menus and adjust settings. Press the dial to confirm selections.
• MENU/ESC Button: Press to access the main menu or to exit a menu/setting without saving changes.

6.2. Prògramadh Chlàran-ama Seachdaineil

The PT32 GST allows for 9 weekly programs, with up to 6 temperature changes per day. Programming can be set for individual days, Monday-Friday, Saturday-Sunday, or Monday-Sunday.

1. Brùth an MENU putan gus a dhol a-steach don phrìomh chlàr.
2. Navigate to "Program Settings" and press the dial to select.
3. Choose the day(s) or day group you wish to program.
4. Set the desired temperature and time for each of the 6 available time slots. Programming resolution is 10 minutes and 0.5°C.
5. Save your changes before exiting.

6.3. Advanced Control Features

• Smachd PID: The thermostat features advanced PID (Proportional-Integral-Derivative) control for precise temperature regulation, minimizing overshoot and maintaining stable temperatures. You can also select Hysteresis or PI control modes.
• Short-Term Temperature Change: Temporarily adjust the temperature without altering the programmed schedule. The thermostat will revert to the schedule at the next programmed event.
• Manual Mode (MANU): Set a constant temperature that overrides the weekly program until manual mode is deactivated.
• OFF maireannach: Turn off the heating/cooling system indefinitely.
• Modh saor-làithean: Set a specific temperature for a defined period (e.g., during vacation) to save energy.
• Sensor Taobh a-muigh: The thermostat supports connection of an external temperature sensor for specialized applications.

6.4. Remote Control via GSM

With a properly configured SIM card, you can control your thermostat remotely by sending SMS messages.

• Atharrachadh Teòthachd: Send an SMS with a specific command to adjust the set temperature.
• System ON/OFF: Send an SMS to turn the heating/cooling system on or off.
• Refer to the detailed GSM command list in the full product manual (if available) or on the manufacturer's website for specific SMS commands.

7. Cumail suas

• Glanadh: Wipe the thermostat's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ath-nuadhachadh bataraidh: Replace the AA backup batteries annually or when the low battery indicator appears on the display.
• Boiler Maintenance Display: The thermostat may display an automatic boiler maintenance reminder. Consult your boiler's manual or a qualified technician for maintenance.
• Ùrachaidhean bathar-bog: Check the Elektrobock website periodically for any available firmware updates for your device.

8. A ’dèanamh trioblaid

If you encounter problems not listed here, please contact Elektrobock customer support.

9. Sònrachaidhean

10. Fiosrachadh Barantais

Elektrobock products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Elektrobock weblàrach-lìn airson teirmichean is cumhaichean barantais mionaideach a tha sònraichte don roinn agad. Mar as trice bidh am barantas a’ còmhdach lochdan ann an stuthan agus obair-ciùird fo chleachdadh àbhaisteach.

Note: Damage caused by improper installation, misuse, unauthorized modifications, or natural disasters is not covered under warranty.

11. Taic agus Conaltradh

For technical assistance, troubleshooting, or general inquiries regarding your Elektrobock PT32 GST thermostat, please contact Elektrobock customer support.

• Weblàrach: Visit the official Elektrobock website for FAQs, updated manuals, and contact information.
• Post-d/Fòn: Specific contact details can usually be found on the manufacturer's weblàrach no ann am pasgan toraidh.

When contacting support, please have your product model number (PT32 GST) and purchase information ready.