Solaxx SALTDIP™ 2-in-1 Electronic Salt Water Tester (Model NP2064) Instruction Manual

1. Ro-ràdh agus Os a chionnview

The Solaxx SALTDIP™ 2-in-1 Electronic Salt Water Tester provides a fast and accurate method for measuring salt content and water temperature. This device eliminates the need for traditional reagents or test strips, offering digital readouts for confident results without color matching. It is designed for use in pools, spas, ponds, and aquariums.

Am measg nam prìomh fheartan tha:

• Rugged water resistant housing
• Commercial grade technology sensor
• Easy push buttons
• Large LCD readouts
• Temperature F°/C° toggle button

2. Fiosrachadh Sàbhailteachd

Please read and understand all safety instructions before using the device. Proper handling ensures accurate readings and prolongs the life of your tester.

• Always wear protective eyewear and gloves when handling any chemical reagents or solutions.
• Avoid direct contact between test solutions and skin, eyes, nose, and mouth.
• Read all instructions and labels on any reagents thoroughly before use.
• Keep all reagents and testing equipment out of the reach of children and pets.
• Wash hands thoroughly with soap and water after each use.
• Dispose of used reagents and equipment according to local regulations.

3. Pasgan-susbaint

Nuair a bhios tu a’ fosgladh a’ phacaid, dèan cinnteach gu bheil a h-uile nì an làthair agus ann an deagh staid:

• Solaxx SALTDIP™ 2-in-1 Electronic Salt Water Tester Unit
• Protective Sensor Cap
• Sample Collection Cup (integrated or separate)
• 2 AAA Batteries (pre-installed or separate)
• Leabhar-stiùiridh/Stiùireadh Iomraidh

4. Suidhich

4.1 Stàladh bataraidh

The SALTDIP™ tester requires 2 AAA batteries. If not pre-installed, open the battery compartment located at the top of the unit, insert the batteries observing polarity, and securely close the compartment.

4.2 Ullachadh Tòiseachaidh

Before first use, remove the protective sensor cap. If a small sponge is present inside the cap, ensure it is slightly moistened with clean water before replacing the cap for storage. This helps maintain sensor integrity.

Figure 1: Solaxx SALTDIP™ tester with protective cap removed, revealing the sensor probes.

5. Stiùireadh Obrachaidh

5.1 A’ cur cumhachd air/dheth

Brùth agus cum am putan cumhachd (⏻) to turn the unit on or off. The LCD display will illuminate.

5.2 Selecting Measurement Mode

The SALTDIP™ tester can measure salt content (PPM) and water temperature. Use the 'MODE/CAL' button to cycle through available measurement modes. Ensure 'SALT' is displayed on the screen for salt readings.

5.3 A ’gabhail tomhas

1. Cruinnich uisge sample using the integrated cup or a clean, separate container.
2. Ensure the sensor probes at the bottom of the tester are clean.
3. Immerse the sensor end of the tester into the water sample, ensuring the probes are fully submerged but not exceeding the 'MAX IMMERSION LINE' if indicated.
4. Wait a few seconds for the reading to stabilize on the LCD display.
5. Record your readings.

Figure 2: The Solaxx SALTDIP™ tester ready for use, displaying its digital interface.

5.4 Aonadan Teòthachd Ag atharrachadh

Press the 'HOLD/TEMP' button to toggle between Fahrenheit (F°) and Celsius (C°) temperature readings.

Figure 3: Key features of the SALTDIP™ tester, including the temperature toggle button.

6. A’ Tuigsinn Leughaidhean

The SALTDIP™ tester provides readings for salt content in Parts Per Million (PPM) and water temperature. Refer to your pool, spa, or aquarium manufacturer's guidelines for ideal salt and temperature ranges.

For swimming pools, a common ideal salt range is typically between 2700-3400 PPM. Readings outside this range may indicate a need for adjustment:

• < 2700 PPM: Poor disinfection effect.
• 2700-3400 PPM: Ideal Range.
• 3400-4500 PPM: Marginally Acceptable.
• > 4500 PPM: Highly Corrosive.

Figure 4: The SALTDIP™ tester measures both salt content and water temperature.

7. Cumail suas

7.1 Glanadh an Sensor

After each use, rinse the sensor probes thoroughly with clean tap water to remove any residue from the tested water. This prevents buildup and ensures accurate future readings.

7.2 Stòradh

Always replace the protective sensor cap after cleaning. Store the tester in a cool, dry place away from direct sunlight and extreme temperatures. If the cap contains a sponge, ensure it remains slightly moist to protect the sensor.

8. A ’dèanamh trioblaid

• Inaccurate or Inconsistent Readings: Ensure the sensor probes are clean. Re-calibrate the device if necessary (refer to the included reference guide for calibration steps). Check battery levels and replace if low.
• Dim or Blank LCD Display: This typically indicates low battery power. Replace the 2 AAA batteries.
• Aonad gun chumhachd air: Thoir sùil air stàladh a’ bhataraidh agus dèan cinnteach gu bheil na bataraidhean ùr.

If issues persist after attempting these troubleshooting steps, please contact customer support.

9. Sònrachaidhean

• Brand: Solaxx
• Àireamh Modail: NP2064
• Stòr cumhachd: Cumhachd bataraidh (feumar 2 bataraidh AAA, air an toirt a-steach)
• Dath: Dubh
• Cuideam nì: 2.4 unnsa (0.15 not)
• Meudan toraidh (L x W x H): 6 x 2 x 11 òirleach
• Ìre Teòthachd Àrd: 100 Ceuman Celsius
• UPC: 859535002207
• Dèanadair: SCP Distributors LLC (Pool Corp)

10. Barantas agus Taic

The Solaxx SALTDIP™ 2-in-1 Electronic Salt Water Tester comes with a Barantas 1 Bliadhna Earranta. For warranty claims, technical support, or any questions regarding the product, please contact SCP Distributors LLC (Pool Corp) customer service.

Cùm dearbhadh do cheannach airson dearbhadh barantais.